Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

SL1625SH

Slkor(SLKORMICRO Elec.) · Magnetic Sensors · SOT-553-5

SL1625SH from Slkor(SLKORMICRO Elec.), in a SOT-553-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 NC unconnected Unused pin (空置端); the datasheet lists it as not connected, so leave it floating.
2 GND power_in Ground pin; the datasheet recommends a 100nF capacitor between VDD and GND, placed as close to the VDD pin as possible, to filter supply noise.
3 NC unconnected Unused pin (空置端); the datasheet lists it as not connected, so leave it floating.
4 VDD power_in Supply input operating from 1.6 V to 5.5 V (absolute maximum 6 V, reverse supply -0.3 V); place a 100nF decoupling capacitor close to this pin.
5 OUTPUT output CMOS push-pull output that goes low when the south-pole field exceeds BOP and stays low, returning high when the field falls below BRP; absolute maximum output drive current is 5 mA.

Key specifications

Parameter Value
Manufacturer Slkor(SLKORMICRO Elec.)
Package SOT-553-5
Category Sensors
Pins 5

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
磁场工作点 (BOPN) BOPN -52 -46 -40 Gauss TA=+25℃, VDD=1.8V 6
磁场释放点 (BRPN) BRPN -38 -34 -26 Gauss TA=+25℃, VDD=1.8V 6
磁滞 (/BOPN/-/BRPN/) BHY -12 Gauss 6
供电电压 (absolute maximum) VDD 6 V 5
反向电源电压 VDD_REV -0.3 V 5
输出驱动电流 IOUTPUT 5 mA 5
封装功耗 PD 400 mW 5
储存温度范围 TSTG -50 150 °C 5
结点最高耐温 TJ 150 °C 5
ESD HBM 人体模型 ESD HBM 8000 V 5
供电电压范围 VDD 1.6 5.5 V 芯片工作 5
工作温度范围 TA -40 85 °C 芯片工作 5
供电电压 VDD 1.6 5.5 V 工作状态 6
输出低电平 VOL 0.02 0.1 V IOUT=1mA 6
平均电流 (SX 5Hz版本) IDD(AVG) 1.6 μA TA=+25℃, VDD=1.8V 6
唤醒状态电流 IDD(Awake) 2 mA TA=+25℃, VDD=1.8V 6
休眠状态电流 IDD(Sleep) 1 μA TA=+25℃, VDD=1.8V 6
唤醒时间 TAWAKE 50 μs 工作状态 6
周期 (5Hz版本) TPERIOD 200 ms 工作状态 6

CAD (KiCad official)

  • Symbol: SL1625SH
  • Footprint: Package_TO_SOT_SMD:SOT-553
  • 3D model: SOT-553-5 (KiCad packages3D, STEP)
  • 3D model files: sl1625sh-etched.step / sl1625sh-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); sl1625sh.step / sl1625sh.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Slkor(SLKORMICRO Elec.) datasheet (10 pp, sha256 bdbe26feea69a22a, retrieved 2026-10-30, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF