component
SL1615SH
Public Made by Adomby adom
Slkor SLKORMICRO Elec Hall Switches, SOT-553-5. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
SL1615SH
Slkor SLKORMICRO Elec · Hall Switches · SOT-553-5
SL1615SH from Slkor SLKORMICRO Elec, in a SOT-553-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NC | unconnected | Vacant (no-connect) terminal listed in the pin table with no function, so it is left unconnected. |
| 2 | GND | power_in | Ground terminal; a 100 nF decoupling capacitor is to be connected between VDD and GND, placed as close as possible to the VDD pin, to filter supply noise. |
| 3 | NC | unconnected | Vacant (no-connect) terminal listed in the pin table with no function, so it is left unconnected. |
| 4 | VDD | power_in | Supply input operating from 1.6 V to 5.5 V (absolute maximum 6 V, reverse supply -0.3 V), with a 100 nF capacitor to GND placed close to this pin. |
| 5 | OUTPUT | output | CMOS push-pull output that goes low when the S-pole field exceeds BOP and returns high when it falls below BRP, with VOL max 0.1 V and VOH min VDD-0.1 V at 1 mA and absolute maximum output drive current of 5 mA. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Slkor SLKORMICRO Elec |
| Package | SOT-553-5 |
| Category | Magnetic Sensors |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| 供电电压 (supply voltage, operating state) | VDD | 1.6 | 5.5 | V | 工作状态 | 6 | |
| 输出低电平 (output low voltage) | VOL | 0.02 | 0.1 | V | IOUT=1mA | 6 | |
| 磁场工作点 (magnetic operate point) | BOPS | 40 | 46 | 52 | Gauss | TA=+25℃, VDD=1.8V | 6 |
| 磁场释放点 (magnetic release point) | BRPS | 26 | 34 | 38 | Gauss | TA=+25℃, VDD=1.8V | 6 |
| 磁滞 (hysteresis) | BHY | 12 | Gauss | (/BOPS/-/BRPS/) | 6 | ||
| 平均电流 (average current) | IDD(AVG) | 1.6 | μA | TA=+25℃, VDD=1.8V | 6 | ||
| 唤醒状态电流 (awake-state current) | IDD(Awake) | 2 | mA | TA=+25℃, VDD=1.8V | 6 | ||
| 休眠状态电流 (sleep-state current) | IDD(Sleep) | 1 | μA | TA=+25℃, VDD=1.8V | 6 | ||
| 唤醒时间 (wake-up time) | TAWAKE | 50 | μs | 工作状态 | 6 | ||
| 周期 (period) | TPERIOD | 200 | ms | 工作状态 | 6 | ||
| 供电电压范围 (supply voltage range) | VDD | 1.6 | 5.5 | V | 芯片工作 | 5 | |
| 工作温度范围 (operating temperature range) | TA | -40 | 85 | oC | 芯片工作 | 5 | |
| 供电电压 (supply voltage) | VDD | 6 | V | 5 | |||
| 反向电源电压 (reverse supply voltage) | VDD_REV | -0.3 | V | 5 | |||
| 输出驱动电流 (output drive current) | IOUTPUT | 5 | mA | 5 | |||
| 封装功耗 (package power dissipation) | PD | 400 | mW | 5 | |||
| 存储温度范围 (printed as 工作温度范围) | TSTG | -50 | 150 | oC | 5 | ||
| 结点最高耐温 (maximum junction temperature) | TJ | 150 | oC | 5 | |||
| 人体模型ESD能力 (ESD HBM) | ESD HBM | 8000 | V | HBM | 5 |
CAD (KiCad official)
- Symbol:
SL1615SH - Footprint:
Package_TO_SOT_SMD:SOT-553 - 3D model: SOT-553-5 (KiCad packages3D, STEP)
- 3D model files:
sl1615sh-etched.step/sl1615sh-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);sl1615sh.step/sl1615sh.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Slkor SLKORMICRO Elec datasheet (10 pp, sha256
1248254007dbccc4, retrieved 2026-10-18, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# SL1615SH
**Slkor SLKORMICRO Elec** · Hall Switches · SOT-553-5
SL1615SH from Slkor SLKORMICRO Elec, in a SOT-553-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NC | unconnected | Vacant (no-connect) terminal listed in the pin table with no function, so it is left unconnected. |
| 2 | GND | power_in | Ground terminal; a 100 nF decoupling capacitor is to be connected between VDD and GND, placed as close as possible to the VDD pin, to filter supply noise. |
| 3 | NC | unconnected | Vacant (no-connect) terminal listed in the pin table with no function, so it is left unconnected. |
| 4 | VDD | power_in | Supply input operating from 1.6 V to 5.5 V (absolute maximum 6 V, reverse supply -0.3 V), with a 100 nF capacitor to GND placed close to this pin. |
| 5 | OUTPUT | output | CMOS push-pull output that goes low when the S-pole field exceeds BOP and returns high when it falls below BRP, with VOL max 0.1 V and VOH min VDD-0.1 V at 1 mA and absolute maximum output drive current of 5 mA. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Slkor SLKORMICRO Elec |
| Package | SOT-553-5 |
| Category | Magnetic Sensors |
| Pins | 5 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| 供电电压 (supply voltage, operating state) | VDD | 1.6 | | 5.5 | V | 工作状态 | 6 |
| 输出低电平 (output low voltage) | VOL | | 0.02 | 0.1 | V | IOUT=1mA | 6 |
| 磁场工作点 (magnetic operate point) | BOPS | 40 | 46 | 52 | Gauss | TA=+25℃, VDD=1.8V | 6 |
| 磁场释放点 (magnetic release point) | BRPS | 26 | 34 | 38 | Gauss | TA=+25℃, VDD=1.8V | 6 |
| 磁滞 (hysteresis) | BHY | | 12 | | Gauss | (/BOPS/-/BRPS/) | 6 |
| 平均电流 (average current) | IDD(AVG) | | 1.6 | | μA | TA=+25℃, VDD=1.8V | 6 |
| 唤醒状态电流 (awake-state current) | IDD(Awake) | | 2 | | mA | TA=+25℃, VDD=1.8V | 6 |
| 休眠状态电流 (sleep-state current) | IDD(Sleep) | | 1 | | μA | TA=+25℃, VDD=1.8V | 6 |
| 唤醒时间 (wake-up time) | TAWAKE | | 50 | | μs | 工作状态 | 6 |
| 周期 (period) | TPERIOD | | 200 | | ms | 工作状态 | 6 |
| 供电电压范围 (supply voltage range) | VDD | 1.6 | | 5.5 | V | 芯片工作 | 5 |
| 工作温度范围 (operating temperature range) | TA | -40 | | 85 | oC | 芯片工作 | 5 |
| 供电电压 (supply voltage) | VDD | | | 6 | V | | 5 |
| 反向电源电压 (reverse supply voltage) | VDD_REV | -0.3 | | | V | | 5 |
| 输出驱动电流 (output drive current) | IOUTPUT | | | 5 | mA | | 5 |
| 封装功耗 (package power dissipation) | PD | | | 400 | mW | | 5 |
| 存储温度范围 (printed as 工作温度范围) | TSTG | -50 | | 150 | oC | | 5 |
| 结点最高耐温 (maximum junction temperature) | TJ | | | 150 | oC | | 5 |
| 人体模型ESD能力 (ESD HBM) | ESD HBM | | | 8000 | V | HBM | 5 |
## CAD (KiCad official)
- Symbol: `SL1615SH`
- Footprint: `Package_TO_SOT_SMD:SOT-553`
- 3D model: SOT-553-5 (KiCad packages3D, STEP)
- 3D model files: `sl1615sh-etched.step` / `sl1615sh-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `sl1615sh.step` / `sl1615sh.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Slkor SLKORMICRO Elec datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588913189400547328) (10 pp, sha256 `1248254007dbccc4`, retrieved 2026-10-18, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/sl1615sh-datasheet.pdf)