3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownSKC6812RGBW-BW-B
OPSCO Optoelectronics · RGB LEDs(Built-In IC) · SMD5050-4P
SKC6812RGBW-BW-B from OPSCO Optoelectronics, in a SMD5050-4P. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Power grounding pin, the ground reference for the device. |
| 2 | DIN | input | Control data signal input, with a high-level threshold of at least 0.65VDD and a low-level threshold of at most 0.35VDD at VDD = 5.0 V, supporting a transfer rate of 800 Kbps. |
| 3 | VDD | power_in | Power supply pin, with a chip input voltage range of 3.7 V to 5.5 V. |
| 4 | DOUT | output | Control data signal output to the next cascaded device's DIN; about 500 ohm protection resistor in series is recommended for short wire runs, subject to actual test data. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | OPSCO Optoelectronics |
| Package | SMD5050-4P |
| Category | Optoelectronics |
| Pins | 4 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Logic supply voltage (working voltage) | VDD | 3.7 | 5.5 | V | 7 | ||
| Operation temperature | Topt | -40 | 80 | ℃ | 7 | ||
| Storage temperature | Tstg | -40 | 80 | ℃ | 7 | ||
| ESD withstand voltage (human body model) | VESD | 2 | KV | Human body model | 7 | ||
| Wavelength RED (dominant) | 617 | 625 | nm | R/G/B: 8mA | 8 | ||
| Wavelength GREEN (dominant) | 525 | 535 | nm | R/G/B: 8mA | 8 | ||
| Wavelength BLUE (dominant) | 465 | 475 | nm | R/G/B: 8mA | 8 | ||
| Brightness RED | 200 | 385 | mcd | R/G/B: 8mA | 8 | ||
| Brightness GREEN | 515 | 932.5 | mcd | R/G/B: 8mA | 8 | ||
| Brightness BLUE | 160 | 320 | mcd | R/G/B: 8mA | 8 | ||
| Brightness WHITE (BW) | 1800 | 2525 | mcd | W: 16.5mA | 8 | ||
| Color temperature (BW) | 5500 | 10000 | K | 8 | |||
| Luminous intensity tolerance | Iv | -10 | 10 | % | 8 | ||
| Dominant wavelength tolerance | -1 | 1 | nm | 8 | |||
| Color temperature tolerance | -100 | 100 | K | 8 | |||
| Symbol period | T | 1.2 | µs | 9 | |||
| 0 code high-level time | T0H | 0.25 | 0.32 | 0.4 | µs | 0 code | 9 |
| 0 code low-level time | T0L | 0.8 | µs | 0 code | 9 | ||
| 1 code high-level time | T1H | 0.65 | 0.75 | 1 | µs | 1 code | 9 |
| 1 code low-level time | T1L | 0.2 | µs | 1 code | 9 | ||
| Reset code low-level time | 200 | µs | Printed as >200 µs (exclusive limit) | 9 | |||
| PWM frequency | FPWM | 4 | KHz | IOUTR/G/B=8mA, IOUTW=16.5mA; OUT port connects 200Ω resistor to VDD in series | 9 |
CAD (KiCad official)
- Symbol:
SKC6812RGBW-BW-B - Footprint:
LED_SMD:LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mm - 3D model: SMD5050-4P (KiCad packages3D, STEP)
- 3D model files:
skc6812rgbw-bw-b-etched.step/skc6812rgbw-bw-b-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);skc6812rgbw-bw-b.step/skc6812rgbw-bw-b.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: OPSCO Optoelectronics datasheet (18 pp, sha256
0149a932083ae404, retrieved 2026-11-06, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).