component
SK6013S5-30
Public Made by Adomby adom
Suntek Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOT-23-5L. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownSK6013S5-30
Suntek · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-23-5L
SK6013S5-30 from Suntek, in a SOT-23-5L. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Power input; the recommended supply range is 2.5 V to 6.5 V, and the absolute maximum input voltage is -0.3 V to 8 V. |
| 2 | GND | power_in | Ground reference pin for the regulator. |
| 3 | EN | input | Active-high enable input that must not float; the datasheet gives VENH minimum 1.2 V and VENL maximum 0.4 V, with input current up to 1.0 µA. |
| 4 | NC | unconnected | Not connected. |
| 5 | VOUT | power_out | Regulated output; recommended operating output current is below 300 mA (absolute maximum 550 mA) and the recommended output capacitor is 1 µF. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Suntek |
| Package | SOT-23-5L |
| Category | Power Management (PMIC) |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output Voltage Range accuracy (VOUT≥2V) | VOUT | -2 | 2 | % | VOUT≥2V, IOUT=1mA | 5 | |
| Line Regulation | ΔVLINE | 0.01 | 0.15 | %/V | VIN=2.7~5.5V,IOUT=1mA | 5 | |
| Current Limit | ILIMIT | 500 | mA | VIN=VEN=4.5V | 5 | ||
| Short Current | ISHORT | 80 | mA | VEN=VIN, VOUT Short to GND with 1Ω | 5 | ||
| Shut-down Current | ISHDN | 1 | µA | VEN=0V | 5 | ||
| EN logic high voltage | VENH | 1.2 | V | VIN=5.5V, IOUT=1mA | 5 | ||
| EN logic low voltage | VENL | 0.4 | V | VIN=5.5V, VOUT=0V | 5 | ||
| EN Input Current | IEN | 1 | μA | VEN= 0 to 5.5V | 5 | ||
| Power Supply Rejection Rate (1 kHz) | PSRR | 75 | dB | VIN=5VDC+0.5VP-P, F=1KHz, IOUT=10mA | 5 | ||
| Power Supply Rejection Rate (1 MHz) | PSRR | 55 | dB | VIN=5VDC+0.5VP-P, F=1MHz, IOUT=10mA | 5 | ||
| Output Noise Voltage | eNO | 20 | μVRMS | 10Hz to 100KHz, COUT=1μF | 5 | ||
| Input Voltage (absolute maximum) | VIN | -0.3 | 8 | V | 4 | ||
| Output Current (absolute maximum) | IOUT | 550 | mA | 4 | |||
| Power Dissipation SOT23-5L | PDMAX | 0.3 | W | SOT23-5L | 4 | ||
| Junction Temperature | TJ | -40 | 125 | ℃ | 4 | ||
| Ambient Temperature | TA | -40 | 85 | ℃ | 4 | ||
| Storage Temperature | TSTG | -55 | 150 | ℃ | 4 | ||
| Package Lead Soldering Temperature | TSOLDER | 260 | ℃ | 10s | 4 | ||
| Supply Voltage (recommended) | VIN | 2.5 | 6.5 | V | 4 | ||
| Output Current (recommended) | IOUT | 300 | mA | printed as <300 mA | 4 | ||
| Operating Temperature | TOPT | -40 | 85 | ℃ | 4 |
CAD (KiCad official)
- Symbol:
SK6013S5-30 - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5L (KiCad packages3D, STEP)
- 3D model files:
sk6013s5-30-etched.step/sk6013s5-30-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);sk6013s5-30.step/sk6013s5-30.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Suntek datasheet (12 pp, sha256
076af2dee2844a1a, retrieved 2026-10-18, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).