main
Ray Publish 0.1.0 e00264b

SIT8924BM-71-33E-100.000000

SiTime · Oscillators · SMD2016-4P

SIT8924BM-71-33E-100.000000 from SiTime, in a SMD2016-4P. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OE/ST/NC input Output enable input: logic high gives the specified frequency output and logic low puts the output in high impedance, and a pull-up of 10 kΩ or less is recommended if the pin is not externally driven.
2 GND power_in Electrical ground; a capacitor of 0.1 µF or higher between VDD and GND is required.
3 OUT output Oscillator clock output with LVCMOS/LVTTL levels, duty cycle 45% to 55%.
4 VDD power_in Power supply voltage, 1.62 V to 1.98 V for the 1.8 V option and 2.25 V to 3.63 V for the 2.25 V to 3.63 V range, with a 0.1 µF or higher capacitor to GND required.

Key specifications

Parameter Value
Manufacturer SiTime
Package SMD2016-4P
Category Resonators/Oscillators
Pins 4

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Frequency Stability F_stab -20 20 ppm Inclusive of Initial tolerance at 25°C, 1st year aging at 25°C, and variations over operating temperature, rated power supply voltage and load (15 pF ± 10%) 1
Output Frequency Range f 1 110 MHz Refer to Table 13 to 15 for a list of supported frequencies 1
Supply Voltage Vdd 2.25 3.63 V All voltages between 2.25 V and 3.63 V including 2.5 V, 2.8 V, 3.0 V and 3.3 V are supported 1
Operating Temperature Range (ambient) T_use -55 125 °C -55, +125 °C Extendedcold AEC-Q100 Grade1 1
Duty Cycle DC 45 55 % All Vdd levels 1
Current Consumption Idd 4 4.8 mA No load condition, f = 20 MHz, Vdd = 2.25 V to3.63 V 1
OE Disable Current I_od 4.5 mA Vdd = 2.5 V to 3.3 V, OE = Low, Output in high Z state 1
Rise/Fall Time 20%-80% Tr, Tf 1.5 3 ns Vdd = 2.25 V - 3.63 V, 20% - 80% 1
Output High Voltage VOH 90 % Vdd IOH = -4 mA (Vdd = 3.0 V or 3.3 V) 1
Output Low Voltage VOL 10 % Vdd IOL = 4 mA (Vdd = 3.0 V or 3.3 V) 1
Input High Voltage VIH 70 % Vdd Pin 1, OE or ST 2
Input Low Voltage VIL 30 % Vdd Pin 1, OE or ST 2
Input Pull-up Impedance (ST logic low) Z_in 2 M Pin 1, ST logic low 2
Startup Time T_start 5.5 ms Measured from the time Vdd reaches its rated minimum value 2
Enable/Disable Time T_oe 130 ns f = 110 MHz. For other frequencies, T_oe = 100 ns + 3 * cycles 2
Resume Time T_resume 5 ms Measured from the time ST pin crosses 50% threshold 2
RMS Period Jitter T_jitt 1.6 2.5 ps f = 75 MHz, 2.25 V to 3.63 V 2
Storage Temperature -65 150 °C 3
Supply Voltage Vdd (absolute) Vdd -0.5 4 V 3
Electrostatic Discharge 2000 V 3
Soldering Temperature 260 °C follow standard Pb free soldering guidelines 3
Junction Temperature 150 °C 3
Thermal Resistance JA, 4 Layer Board (2016 package) JA 152 °C/W JA, 4 Layer Board, 2.0 x 1.6 mm (2016) package 3
Thermal Resistance JA, 2 Layer Board (2016 package) JA 252 °C/W JA, 2 Layer Board, 2.0 x 1.6 mm (2016) package 3
Thermal Resistance JC, Bottom (2016 package) JC 36 °C/W JC, Bottom, 2.0 x 1.6 mm (2016) package 3
Maximum Operating Junction Temperature 135 °C Max operating ambient 125°C 3

CAD (KiCad official)

  • Symbol: SIT8924BM-71-33E-100.000000
  • Footprint: Crystal:Crystal_SMD_2016-4Pin_2.0x1.6mm
  • 3D model: SMD2016-4P (KiCad packages3D, STEP)
  • 3D model files: sit8924bm-71-33e-100-000000-etched.step / sit8924bm-71-33e-100-000000-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); sit8924bm-71-33e-100-000000.step / sit8924bm-71-33e-100-000000.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: SiTime datasheet (19 pp, sha256 ec4c13f00e3f6765, retrieved 2026-11-02, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF