3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownSIT8924BA-78-18E-25.000000
SiTime · Programmable Oscillators · SMD2016-4P
SIT8924BA-78-18E-25.000000 from SiTime, in a SMD2016-4P. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OE/ST/NC | input | Factory-programmed pin 1 function; this MPN carries the 'E' code, so pin 1 is Output Enable: logic high gives the specified frequency output and logic low puts the output in high impedance (only the output driver is disabled), with VIH at least 70% Vdd, VIL at most 30% Vdd, and an internal pull-up of about 100 kΩ, where a pull-up of 10 kΩ or less is recommended if the pin is not externally driven. |
| 2 | GND | power_in | Electrical ground; a capacitor of 0.1 µF or higher must be connected between VDD and GND. |
| 3 | OUT | output | Oscillator clock output with LVCMOS/LVTTL levels, where the 20%-80% rise/fall time is set by the selected drive strength code and the output load (up to 60 pF). |
| 4 | VDD | power_in | Power supply voltage; this MPN is the 1.8 V option (18 code, 1.62 V to 1.98 V), and the absolute maximum Vdd is -0.5 V to 4 V, with a 0.1 µF or higher capacitor required between VDD and GND. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | SiTime |
| Package | SMD2016-4P |
| Category | Crystals, Oscillators, Resonators |
| Pins | 4 |
CAD (KiCad official)
- Symbol:
SIT8924BA-78-18E-25.000000 - Footprint:
Crystal:Crystal_SMD_2016-4Pin_2.0x1.6mm - 3D model: SMD2016-4P (KiCad packages3D, STEP)
- 3D model files:
sit8924ba-78-18e-25-000000-etched.step/sit8924ba-78-18e-25-000000-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);sit8924ba-78-18e-25-000000.step/sit8924ba-78-18e-25-000000.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: SiTime datasheet (19 pp, sha256
ec4c13f00e3f6765, retrieved 2026-10-13, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).