main
Ray Publish 0.1.0 b5955b0

SIT8924BA-73-33N-50.000000G

SiTime · Pre-programmed Oscillators · SMD2016-4P

SIT8924BA-73-33N-50.000000G from SiTime, in a SMD2016-4P. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 NC unconnected In this No Connect variant (feature code N in the part number), pin 1 has no function and may be left open or tied to any voltage between 0 and Vdd.
2 GND power_in Electrical ground; a capacitor of 0.1 µF or higher is required between Vdd and GND.
3 OUT output Oscillator output, LVCMOS/LVTTL compatible, specified with a 15 pF output load.
4 VDD power_in Power supply voltage of 1.62 V to 1.98 V for the 1.8 V option or 2.25 V to 3.63 V for the other supported voltages, with a 0.1 µF or higher capacitor required between Vdd and GND.

Key specifications

Parameter Value
Manufacturer SiTime
Package SMD2016-4P
Category Crystals/Oscillators/Resonators
Pins 4

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Output Frequency Range f 1 110 MHz Refer to Table 13 to 15 for a list supported frequencies 1
Frequency Stability F_stab -50 50 ppm Inclusive of initial tolerance at 25°C, 1st year aging at 25°C, and variations over operating temperature, rated power supply voltage and load (15 pF ± 10%) 1
Supply Voltage Vdd 2.25 3.63 V Row for 2.25, 3.63 V; all voltages between 2.25V and 3.63V supported 1
Operating Temperature Range (ambient) T_use -40 125 °C AEC-Q100 Grade 1 1
Current Consumption Idd 4 4.8 mA No load condition, f = 20 MHz, Vdd = 2.25V to 3.63V 1
OE Disable Current I_od 4.5 mA Vdd = 2.5V to 3.3V, OE = Low, Output in high Z state 1
Duty Cycle DC 45 55 % All Vdd levels 1
Rise/Fall Time Tr, Tf 1.5 3 ns Vdd = 2.25V - 3.63V, 20% - 80% 1
Output High Voltage VOH 90 % Vdd IOH = -4 mA (Vdd = 3.0V or 3.3V) 1
Output Low Voltage VOL 10 % Vdd IOL = 4 mA (Vdd = 3.0V or 3.3V) 1
Input High Voltage VIH 70 % Vdd Pin 1, OE or ST 2
Input Low Voltage VIL 30 % Vdd Pin 1, OE or ST 2
Input Pull-up Impedance (ST logic low) Z_in 2 MΩ Pin 1, ST logic low 2
Startup Time T_start 5.5 ms Measured from the time Vdd reaches its rated minimum value 2
Enable/Disable Time T_oe 130 ns f = 110 MHz. For other frequencies, T_oe = 100 ns + 3 * cycles 2
Resume Time T_resume 5 ms Measured from the time ST pin crosses 50% threshold 2
RMS Period Jitter T_jitt 1.6 2.5 ps f = 75 MHz, 2.25V to 3.63V 2
Supply decoupling capacitor 0.1 µF Between Vdd and GND (note 4) 2
Storage Temperature -65 150 °C 3
Supply Voltage (absolute) Vdd -0.5 4 V 3
Electrostatic Discharge 2000 V 3
Soldering Temperature 260 °C Follow standard Pb free soldering guidelines 3
Junction Temperature 150 °C Exceeding for extended period may damage the device 3
Thermal resistance junction-to-ambient, 4 layer board θJA 152 °C/W 2.0 x 1.6 mm (2016) package, JESD51 reference layout 3
Thermal resistance junction-to-ambient, 2 layer board θJA 252 °C/W 2.0 x 1.6 mm (2016) package, JESD51 reference layout 3
Thermal resistance junction-to-case, bottom θJC 36 °C/W 2.0 x 1.6 mm (2016) package 3
Maximum Operating Junction Temperature 135 °C Maximum operating ambient temperature 125°C 3

CAD (KiCad official)

  • Symbol: SIT8924BA-73-33N-50.000000G
  • Footprint: Crystal:Crystal_SMD_2016-4Pin_2.0x1.6mm
  • 3D model: SMD2016-4P (KiCad packages3D, STEP)
  • 3D model files: sit8924ba-73-33n-50-000000g-etched.step / sit8924ba-73-33n-50-000000g-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); sit8924ba-73-33n-50-000000g.step / sit8924ba-73-33n-50-000000g.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: SiTime datasheet (19 pp, sha256 a88fca16392fff17, retrieved 2026-10-30, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF