Generated by kicad-footprint-generator · KiCad file format 20260206
SIT8920BM-71-33N-10.000000G
SiTime · Pre-programmed Oscillators · SMD2016-4P
SIT8920BM-71-33N-10.000000G from SiTime, in a SMD2016-4P. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OE/ST/NC | unconnected | For the No Connect (N) variant, pin 1 has no function: any voltage between 0 and Vdd or an open pin gives the specified frequency output regardless of its level. |
| 2 | GND | power_in | Electrical ground; a capacitor of 0.1 µF or higher between Vdd and GND is required. |
| 3 | OUT | output | Oscillator LVCMOS/LVTTL output, specified with 15 pF load, duty cycle 45% to 55%, and 20%-80% rise/fall time of 2.0 ns maximum at 3.3V. |
| 4 | VDD | power_in | Power supply voltage, 2.97 V to 3.63 V for the 3.3V variant; a capacitor of 0.1 µF or higher between Vdd and GND is required. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | SiTime |
| Package | SMD2016-4P |
| Category | Crystals/Oscillators/Resonators |
| Pins | 4 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Frequency Stability | F_stab | -20 | 20 | ppm | Inclusive of initial tolerance at 25°C, 1st year aging at 25°C, and variations over operating temperature, rated power supply voltage and load (15 pF ± 10%) | 1 | |
| Output Frequency Range | f | 1 | 110 | MHz | Refer to Table 13 for the exact list of supported frequencies | 1 | |
| Operating Temperature Range | T_use | -55 | 125 | °C | 1 | ||
| Supply Voltage | Vdd | 2.97 | 3.3 | 3.63 | V | 3.3V ±10% column | 1 |
| Current Consumption | Idd | 3.8 | 4.7 | mA | No load condition, f = 20 MHz, Vdd = 2.8V, 3.0V or 3.3V | 1 | |
| Duty Cycle | DC | 45 | 55 | % | All Vdds | 1 | |
| Rise/Fall Time | Tr, Tf | 1 | 2 | ns | Vdd = 2.5V, 2.8V, 3.0V or 3.3V, 20% - 80% | 1 | |
| Rise/Fall Time | Tr, Tf | 1 | 3 | ns | Vdd = 2.25V - 3.63V, 20% - 80% | 1 | |
| Output High Voltage | VOH | 90 | % Vdd | IOH = -4 mA (Vdd = 3.0V or 3.3V) | 1 | ||
| Output Low Voltage | VOL | 10 | % Vdd | IOL = 4 mA (Vdd = 3.0V or 3.3V) | 1 | ||
| Startup Time | T_start | 5 | ms | Measured from the time Vdd reaches its rated minimum value | 2 | ||
| RMS Period Jitter | T_jitt | 1.6 | 2.5 | ps | f = 75MHz, Vdd = 2.5V, 2.8V, 3.0V or 3.3V | 2 | |
| Peak-to-peak Period Jitter | T_pk | 12 | 20 | ps | f = 75MHz, Vdd = 2.5V, 2.8V, 3.0V or 3.3V | 2 | |
| RMS Phase Jitter (random) | T_phj | 0.5 | 0.8 | ps | f = 75MHz, Integration bandwidth = 900 kHz to 7.5 MHz | 2 | |
| RMS Phase Jitter (random) | T_phj | 1.3 | 2 | ps | f = 75MHz, Integration bandwidth = 12 kHz to 20 MHz | 2 | |
| Storage Temperature | -65 | 150 | °C | 3 | |||
| Supply Voltage (Vdd) absolute | Vdd | -0.5 | 4 | V | 3 | ||
| Electrostatic Discharge | 2000 | V | 3 | ||||
| Soldering Temperature | 260 | °C | Follow standard Pb free soldering guidelines | 3 | |||
| Junction Temperature | 150 | °C | Exceeding this temperature for extended period of time may damage the device | 3 | |||
| Maximum Operating Junction Temperature | 135 | °C | Max operating ambient temperature 125°C | 3 | |||
| Thermal Resistance Junction-to-Ambient, 4 Layer Board (2016 package) | JA | 152 | °C/W | JA, 4 Layer Board, 2016 package | 3 | ||
| Thermal Resistance Junction-to-Ambient, 2 Layer Board (2016 package) | JA | 252 | °C/W | JA, 2 Layer Board, 2016 package | 3 | ||
| Thermal Resistance Junction-to-Case, Bottom (2016 package) | JC | 36 | °C/W | JC, Bottom, 2016 package | 3 |
CAD (KiCad official)
- Symbol:
SIT8920BM-71-33N-10.000000G - Footprint:
Crystal:Crystal_SMD_2016-4Pin_2.0x1.6mm - 3D model: SMD2016-4P (KiCad packages3D, STEP)
- 3D model files:
sit8920bm-71-33n-10-000000g-etched.step/sit8920bm-71-33n-10-000000g-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);sit8920bm-71-33n-10-000000g.step/sit8920bm-71-33n-10-000000g.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: SiTime datasheet (18 pp, sha256
e111b0e5aa792a74, retrieved 2026-11-02, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).