3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownSIT8918BA-21-XXE-100.000000E
SiTime · Pre-programmed Oscillators · SMD3225-4P
SIT8918BA-21-XXE-100.000000E from SiTime, in a SMD3225-4P. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OE/ST/NC | input | Factory-programmed control pin: in OE mode, logic low disables the output driver (high impedance) and in ST mode, logic low puts the device in sleep with the output weakly pulled low, with input thresholds of 70% Vdd minimum (high) and 30% Vdd maximum (low), and a pull-up of 10 kΩ or less recommended if not externally driven; in NC mode any voltage between 0 and Vdd or an open pin has no effect. |
| 2 | GND | power_in | Electrical ground; a capacitor of 0.1 µF or higher is required between Vdd and GND. |
| 3 | OUT | output | Oscillator clock output (LVCMOS/LVTTL compatible), with duty cycle specified at 45% to 55% for a 15 pF load. |
| 4 | VDD | power_in | Power supply voltage, with rated operation at 2.25 V to 3.63 V (nominal 1.8 V, 2.5 V, 2.8 V, 3.0 V or 3.3 V options) and absolute maximum limits of -0.5 V to 4 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | SiTime |
| Package | SMD3225-4P |
| Category | Crystals/Oscillators/Resonators |
| Pins | 4 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output Frequency Range | f | 1 | 110 | MHz | Refer to Table 13 for the exact list of supported frequencies | 1 | |
| Frequency Stability | F_stab | -20 | 20 | ppm | Inclusive of initial tolerance at 25°C, 1st year aging at 25°C, and variations over operating temperature, rated power supply voltage and load (15 pF ± 10%) | 1 | |
| Operating Temperature Range (ambient) | T_use | -40 | 125 | °C | Automotive | 1 | |
| Supply Voltage | Vdd | 2.25 | 3.63 | V | 1 | ||
| Current Consumption | Idd | 3.8 | 4.7 | mA | No load condition, f = 20 MHz, Vdd = 2.8V, 3.0V or 3.3V | 1 | |
| Current Consumption | Idd | 3.6 | 4.5 | mA | No load condition, f = 20 MHz, Vdd = 2.5V | 1 | |
| OE Disable Current | I_od | 4.5 | mA | Vdd = 2.5V to 3.3V, OE = Low, Output in high Z state. | 1 | ||
| Duty Cycle | DC | 45 | 55 | % | All Vdds | 1 | |
| Rise/Fall Time (20% - 80%) | Tr, Tf | 1 | 2 | ns | Vdd = 2.5V, 2.8V, 3.0V or 3.3V, 20% - 80% | 1 | |
| Rise/Fall Time (20% - 80%) | Tr, Tf | 1 | 3 | ns | Vdd = 2.25V - 3.63V, 20% - 80% | 1 | |
| Output High Voltage | VOH | 90 | % Vdd | IOH = -4 mA (Vdd = 3.0V or 3.3V) | 1 | ||
| Output Low Voltage | VOL | 10 | % Vdd | IOL = 4 mA (Vdd = 3.0V or 3.3V) | 1 | ||
| Input High Voltage | VIH | 70 | % Vdd | Pin 1, OE or ST | 2 | ||
| Input Low Voltage | VIL | 30 | % Vdd | Pin 1, OE or ST | 2 | ||
| Input Pull-up Impedance | Z_in | 50 | 87 | 150 | k | Pin 1, OE logic high or logic low, or ST logic high | 2 |
| Startup Time | T_start | 5 | ms | Measured from the time Vdd reaches its rated minimum value | 2 | ||
| Enable/Disable Time | T_oe | 130 | ns | f = 110 MHz. For other frequencies, T_oe = 100 ns + 3 * clock periods | 2 | ||
| RMS Period Jitter | T_jitt | 1.6 | 2.5 | ps | f = 75MHz, Vdd = 2.5V, 2.8V, 3.0V or 3.3V | 2 | |
| Peak-to-peak Period Jitter | T_pk | 12 | 20 | ps | f = 75MHz, Vdd = 2.5V, 2.8V, 3.0V or 3.3V | 2 | |
| RMS Phase Jitter (random) | T_phj | 0.5 | 0.8 | ps | f = 75MHz, Integration bandwidth = 900 kHz to 7.5 MHz | 2 | |
| RMS Phase Jitter (random) | T_phj | 1.3 | 2 | ps | f = 75MHz, Integration bandwidth = 12 kHz to 20 MHz | 2 | |
| Storage Temperature | -65 | 150 | °C | 3 | |||
| Supply Voltage Vdd | Vdd | -0.5 | 4 | V | 3 | ||
| Electrostatic Discharge | 2000 | V | 3 | ||||
| Soldering Temperature | 260 | °C | Follow standard Pb free soldering guidelines | 3 | |||
| Junction Temperature | 150 | °C | 3 | ||||
| Thermal Resistance, junction-to-ambient, 4 layer board | JA | 109 | °C/W | Package 3225, JA 4 Layer Board | 3 | ||
| Thermal Resistance, junction-to-ambient, 2 layer board | JA | 212 | °C/W | Package 3225, JA 2 Layer Board | 3 | ||
| Thermal Resistance, junction-to-case, bottom | JC | 27 | °C/W | Package 3225, JC Bottom | 3 | ||
| Maximum Operating Junction Temperature | 135 | °C | Max operating temperature (ambient) 125°C | 3 |
CAD (KiCad official)
- Symbol:
SIT8918BA-21-XXE-100.000000E - Footprint:
Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm - 3D model: SMD3225-4P (KiCad packages3D, STEP)
- 3D model files:
sit8918ba-21-xxe-100-000000e-etched.step/sit8918ba-21-xxe-100-000000e-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);sit8918ba-21-xxe-100-000000e.step/sit8918ba-21-xxe-100-000000e.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: SiTime datasheet (18 pp, sha256
d2e843417fa02f77, retrieved 2026-10-29, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).