Generated by kicad-footprint-generator · KiCad file format 20260206
SIT8008BC-22-33E-26.000000
SiTime · Programmable Oscillators · SMD3225-4P
SIT8008BC-22-33E-26.000000 from SiTime, in a SMD3225-4P. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OE/ST/NC | input | Output enable (H: output active, L: output high-Z), standby (H: output active, L: output low with weak pull-down and device sleeps, supply current reduces to I_std), or no connect (any voltage between 0 and Vdd or open, no function), depending on factory programming; VIH 70% Vdd min, VIL 30% Vdd max. |
| 2 | GND | power_in | Electrical ground. |
| 3 | OUT | output | Oscillator LVCMOS output. |
| 4 | VDD | power_in | Power supply voltage (1.62 V to 3.63 V depending on option; a 0.1 µF or higher capacitor between Vdd and GND is required, absolute max 4 V). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | SiTime |
| Package | SMD3225-4P |
| Category | Crystals, Oscillators, Resonators |
| Pins | 4 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage Vdd_3.3 | Vdd_3.3 | 2.97 | 3.3 | 3.63 | V | 1 | |
| Output Frequency Range | f | 1 | 110 | MHz | 1 | ||
| Operating Temperature Range (Extended Commercial) | T_use | -20 | 70 | °C | Extended Commercial | 1 | |
| Current Consumption | Idd | 3.8 | 4.5 | mA | No load condition, f = 20 MHz, Vdd_3.3 | 1 | |
| OE Disable Current | I_OD | 4.2 | mA | Vdd_3.3. OE = GND, Output in high-Z state | 1 | ||
| Standby Current | I_std | 2.1 | 4.3 | µA | ST = GND, Vdd_3.3. Output is weakly pulled down | 1 | |
| Duty Cycle | DC | 45 | 55 | % | All Vdds. See Duty Cycle definition in Figure 3 and Footnote 6 | 2 | |
| Rise/Fall Time | Tr, Tf | 1 | 2 | ns | 20% - 80% Vdd_3.3 | 2 | |
| Output High Voltage | VOH | 90 | % Vdd | IOH = -4 mA (Vdd_3.0 and Vdd_3.3) | 2 | ||
| Output Low Voltage | VOL | 10 | % Vdd | IOH = -4 mA (Vdd_3.0 and Vdd_3.3) | 2 | ||
| Input High Voltage | VIH | 70 | % Vdd | Pin 1, OE or ST | 2 | ||
| Input Low Voltage | VIL | 30 | % Vdd | Pin 1, OE or ST | 2 | ||
| Input Pull-up Impedance | Z_in | 50 | 87 | 150 | kΩ | Pin 1, OE logic high or logic low, or ST logic high | 2 |
| Input Impedance, ST logic low | Z_in | 2 | MΩ | Pin 1, ST logic low | 2 | ||
| Startup Time | T_start | 5 | ms | Measured from the time Vdd reaches its rated minimum value | 2 | ||
| Enable/Disable Time | T_oe | 130 | ns | f = 110 MHz. For other frequencies, T_oe = 100 ns + 3 * cycles | 2 | ||
| Resume Time | T_resume | 5 | ms | Measured from the time ST pin crosses 50% threshold | 2 | ||
| RMS Period Jitter | T_jitt | 1.8 | 3 | ps | f = 75 MHz, Vdd_3.3 | 2 | |
| Peak-to-peak Period Jitter | T_pk | 12 | 25 | ps | f = 75 MHz, Vdd_3.3 | 2 | |
| RMS Phase Jitter (random), 900 kHz to 7.5 MHz | T_phj | 0.5 | 0.9 | ps | f = 75 MHz, Integration bandwidth = 900 kHz to 7.5 MHz. Vdd_3.3 | 2 | |
| RMS Phase Jitter (random), 12 kHz to 20 MHz | T_phj | 1.3 | 2 | ps | f = 75 MHz, Integration bandwidth = 12 kHz to 20 MHz. Vdd_3.3 | 2 | |
| Storage Temperature | -65 | 150 | °C | 3 | |||
| Supply Voltage (Absolute Maximum) | Vdd | -0.5 | 4 | V | 3 | ||
| Electrostatic Discharge | 2000 | V | 3 | ||||
| Soldering Temperature | 260 | °C | follow standard Pb free soldering guidelines | 3 | |||
| Junction Temperature | 150 | °C | Exceeding this temperature for extended period of time may damage the device | 3 | |||
| Thermal Resistance Junction-to-Ambient, 4 Layer Board | θJA | 109 | °C/W | Package 3225, 4 Layer Board | 3 | ||
| Thermal Resistance Junction-to-Ambient, 2 Layer Board | θJA | 212 | °C/W | Package 3225, 2 Layer Board | 3 | ||
| Thermal Resistance Junction-to-Case, Bottom | θJC | 27 | °C/W | Package 3225 | 3 | ||
| Maximum Operating Junction Temperature | 80 | °C | Max Operating Temperature (ambient) 70°C | 3 |
CAD (KiCad official)
- Symbol:
SIT8008BC-22-33E-26.000000 - Footprint:
Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm - 3D model: SMD3225-4P (KiCad packages3D, STEP)
- 3D model files:
sit8008bc-22-33e-26-000000-etched.step/sit8008bc-22-33e-26-000000-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);sit8008bc-22-33e-26-000000.step/sit8008bc-22-33e-26-000000.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: SiTime datasheet (17 pp, sha256
ea4a3c7ea2e6d0c0, retrieved 2026-10-23, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).