main
Ray Publish 0.1.0 4e2d233

SiT8008AC-12-33E-5.000000D

SiTime · Pre-programmed Oscillators · SMD2520-4P

SiT8008AC-12-33E-5.000000D from SiTime, in a SMD2520-4P. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OE/ST input Output enable: H or open gives the specified frequency output, and L puts the output in high impedance with only the output driver disabled (in the ST variant, L instead selects standby with a weak pull-down and sleep mode).
2 GND power_in Electrical ground; a 0.1 µF capacitor between VDD and GND is recommended.
3 OUT output Oscillator output, LVCMOS/HCMOS compatible.
4 VDD power_in Power supply voltage, with an absolute maximum range of -0.5 V to 4 V.

Key specifications

Parameter Value
Manufacturer SiTime
Package SMD2520-4P
Category Crystals/Oscillators/Resonators
Pins 4

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Output Frequency Range f 1 110 MHz 1
Frequency Stability (±20 PPM option, code 1) F_stab -20 20 PPM Inclusive of Initial tolerance at 25°C, 1st year aging at 25°C, and variations over operating temperature, rated power supply voltage and load (15 pF ± 10%). 1
Operating Temperature Range (C option) T_use -20 70 °C Extended Commercial 1
Supply Voltage (33 = 3.3V ±10%) Vdd 2.97 3.3 3.63 V 1
Current Consumption Idd 3.8 4.5 mA No load condition, f = 20 MHz, Vdd = 2.8V, 3.0V, 3.3V, 2.25V to 3.63V 1
OE Disable Current I_OD 4 mA Vdd = 2.5V to 3.3V, OE = GND, output is Weakly Pulled Down 1
Duty Cycle DC 45 55 % All Vdds 1
Rise/Fall Time (2.5/2.8/3.0/3.3V) Tr, Tf 1 2 ns Vdd = 2.5V, 2.8V, 3.0V or 3.3V, 20% - 80% 1
Rise/Fall Time (2.25V to 3.63V) Tr, Tf 2 ns Vdd = 2.25V - 3.63V, 20% - 80% 1
Output High Voltage VOH 90 % Vdd IOH = -4 mA (Vdd = 3.0V or 3.3V) 1
Output Low Voltage VOL 10 % Vdd IOL = 4 mA (Vdd = 3.0V or 3.3V) 1
Input High Voltage VIH 70 % Vdd Pin 1, OE or ST 1
Input Low Voltage VIL 30 % Vdd Pin 1, OE or ST 1
Input Pull-up Impedance (OE logic high or low) Z_in 87 100 k Pin 1, OE logic high or logic low, or ST logic high 1
Startup Time T_start 5 ms Measured from the time Vdd reaches its rated minimum value 2
Enable/Disable Time T_oe 130 ns f = 110 MHz. For other frequencies, T_oe = 100 ns + 3 * cycles 2
RMS Period Jitter T_jitt 1.76 3 ps f = 75 MHz, Vdd = 2.5V, 2.8V, 3.0V or 3.3V 2
RMS Phase Jitter (random), 900 kHz to 7.5 MHz T_phj 0.5 0.9 ps f = 75 MHz, Integration bandwidth = 900 kHz to 7.5 MHz 2
RMS Phase Jitter (random), 12 kHz to 20 MHz T_phj 1.3 2 ps f = 75 MHz, Integration bandwidth = 12 kHz to 20 MHz 2
Storage Temperature -65 150 °C 2
Supply Voltage VDD (absolute) VDD -0.5 4 V 2
Electrostatic Discharge 2000 V 2
Soldering Temperature 260 °C follow standard Pb free soldering guidelines 2
Junction Temperature 150 °C 2
Thermal Resistance JA, 4 Layer Board (3225 package) JA 109 °C/W 4 Layer Board, package 3225 (3.2 x 2.5 mm) 2
Thermal Resistance JA, 2 Layer Board (3225 package) JA 212 °C/W 2 Layer Board, package 3225 (3.2 x 2.5 mm) 2
Thermal Resistance JC, Bottom (3225 package) JC 27 °C/W Bottom, package 3225 (3.2 x 2.5 mm) 2

CAD (KiCad official)

  • Symbol: SiT8008AC-12-33E-5.000000D
  • Footprint: Crystal:Crystal_SMD_2520-4Pin_2.5x2.0mm
  • 3D model: SMD2520-4P (KiCad packages3D, STEP)
  • 3D model files: sit8008ac-12-33e-5-000000d-etched.step / sit8008ac-12-33e-5-000000d-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); sit8008ac-12-33e-5-000000d.step / sit8008ac-12-33e-5-000000d.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: SiTime datasheet (16 pp, sha256 0b5cfe117adfb0e5, retrieved 2026-10-29, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF