component
SIT65HVD08DR
Public Made by Adomby adom
SIT RS-485 / RS-422 ICs, SOP-8. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
← Commit history
page.json+11−8@@ -32,25 +32,25 @@ "number": "1", "name": "RO", "type": "output",- "description": "Receiver output. Logic-high when A\u2212B \u2265 +200 mV, logic-low when A\u2212B \u2264 \u2212200 mV. High-impedance (tri-state) when /RE is high. VOH \u2265 VCC\u22121.5 V at IOUT = \u22124 mA; VOL \u2264 0.4 V at IOUT = +4 mA."+ "description": "Receiver output. Logic-high when A−B ≥ +200 mV, logic-low when A−B ≤ −200 mV. High-impedance (tri-state) when /RE is high. VOH ≥ VCC−1.5 V at IOUT = −4 mA; VOL ≤ 0.4 V at IOUT = +4 mA." }, { "number": "2", "name": "/RE", "type": "input",- "description": "Receiver output enable, active-low. Logic-low enables the receiver output RO; logic-high places RO in a high-impedance state. VIH \u2265 2.0 V, VIL \u2264 0.8 V, input current \u00b12 \u00b5A max."+ "description": "Receiver output enable, active-low. Logic-low enables the receiver output RO; logic-high places RO in a high-impedance state. VIH ≥ 2.0 V, VIL ≤ 0.8 V, input current ±2 µA max." }, { "number": "3", "name": "DE", "type": "input",- "description": "Driver output enable, active-high. Logic-high enables the differential driver outputs on pins A and B; logic-low places the driver in a high-impedance state. With DE=0 and /RE=high the device enters low-current shutdown (typ. 0.1-0.4 \u00b5A)."+ "description": "Driver output enable, active-high. Logic-high enables the differential driver outputs on pins A and B; logic-low places the driver in a high-impedance state. With DE=0 and /RE=high the device enters low-current shutdown (typ. 0.1-0.4 µA)." }, { "number": "4", "name": "DI", "type": "input",- "description": "Driver input. When the driver is enabled, a logic-low on DI forces A low and B high; a logic-high on DI forces A high and B low. VIH \u2265 2.0 V, VIL \u2264 0.8 V."+ "description": "Driver input. When the driver is enabled, a logic-low on DI forces A low and B high; a logic-high on DI forces A high and B low. VIH ≥ 2.0 V, VIL ≤ 0.8 V." }, { "number": "5",@@ -62,19 +62,19 @@ "number": "6", "name": "A", "type": "bidirectional",- "description": "Non-inverting RS-485/RS-422 bus pin. Driver output A when DE is high; receiver input A when /RE is low. Tolerates \u221215 V to +15 V bus fault voltage and \u00b116 kV contact-discharge ESD. Receiver input impedance \u2265 96 k\u03a9 (1/8 unit load)."+ "description": "Non-inverting RS-485/RS-422 bus pin. Driver output A when DE is high; receiver input A when /RE is low. Tolerates −15 V to +15 V bus fault voltage and ±16 kV contact-discharge ESD. Receiver input impedance ≥ 96 kΩ (1/8 unit load)." }, { "number": "7", "name": "B", "type": "bidirectional",- "description": "Inverting RS-485/RS-422 bus pin. Driver output B when DE is high; receiver input B when /RE is low. Tolerates \u221215 V to +15 V bus fault voltage and \u00b116 kV contact-discharge ESD. Receiver input impedance \u2265 96 k\u03a9 (1/8 unit load)."+ "description": "Inverting RS-485/RS-422 bus pin. Driver output B when DE is high; receiver input B when /RE is low. Tolerates −15 V to +15 V bus fault voltage and ±16 kV contact-discharge ESD. Receiver input impedance ≥ 96 kΩ (1/8 unit load)." }, { "number": "8", "name": "VCC", "type": "power_in",- "description": "Power supply, 3.0 V to 5.5 V nominal (absolute max +7 V). Typical supply current 430-510 \u00b5A active; \u2264 10 \u00b5A in shutdown. Bypass with a 100 nF ceramic capacitor to GND close to the pin."+ "description": "Power supply, 3.0 V to 5.5 V nominal (absolute max +7 V). Typical supply current 430-510 µA active; ≤ 10 µA in shutdown. Bypass with a 100 nF ceramic capacitor to GND close to the pin." } ], "provenance": {@@ -148,5 +148,8 @@ "docs/sit65hvd08dr-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ]+ ],+ "visibility": {+ "public": true+ } }