component

SIT3490EESA

Public Made by Adom

by adom

SIT RS-485 / RS-422 ICs, SOP-8. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.

componentinterfacesit3490eesa
Overview Files Discover Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity
main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs sit3490eesa: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers pin 1: carry the footprint's marker into the .lbr, the viewer and page.json (silk-marker, drawn, top-left) · Ray
package.json Publish 0.2.0 · Ray
pads.json pin 1: carry the footprint's marker into the .lbr, the viewer and page.json (silk-marker, drawn, top-left) · Ray
page.json sit3490eesa: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
README.md sit3490eesa: laser-etched CAD + chip hero (factory 2.0.0 backfill) · Ray
sit3490eesa-etched.fit.json sit3490eesa: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
sit3490eesa-etched.glb sit3490eesa: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
sit3490eesa-etched.step sit3490eesa: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
sit3490eesa.glb Publish 0.1.0 · Ray
sit3490eesa.kicad_mod Publish 0.1.0 · Ray
sit3490eesa.kicad_sym Publish 0.1.0 · Ray
sit3490eesa.lbr rebuild the library on adom-lbr 2.32.0. The published copy was built by 2.18.0, which imported every KiCad roundrect an… · Ray
sit3490eesa.step Publish 0.1.0 · Ray

SIT3490EESA

SIT · RS-485 / RS-422 ICs · SOP-8

SIT3490EESA from SIT, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VCC power_in Positive supply input. Operating range 3.0V to 5.5V (absolute max +7V). Typical supply current ICC = 240µA (max 400µA). Bypass locally to GND.
2 RO output Receiver output (CMOS logic). RO is high when A−B ≥ +200mV and low when A−B ≤ −200mV. VOH ≥ VCC−1.5V at −4mA; VOL ≤ 0.4V at +4mA.
3 DI input Driver input (CMOS logic). A low on DI forces Y low and Z high; a high on DI forces Y high and Z low. VIH ≥ 2.0V, VIL ≤ 0.8V, input leakage ±2µA.
4 GND power_in Device ground. Reference for all voltages on the part.
5 Y output Non-inverting differential driver output to the RS-485/RS-422 bus. Differential swing VOD ≥ 1.5V into RL = 54Ω. ±15kV HBM ESD protected. Includes short-circuit and over-voltage protection.
6 Z output Inverting differential driver output to the RS-485/RS-422 bus. Complementary to Y. ±15kV HBM ESD protected; short-circuit and over-voltage protected.
7 B input Inverting differential receiver input from the RS-485/RS-422 bus. 1/8 unit-load, RIN ≈ 96kΩ. Common-mode range −7V to +12V. ±15kV HBM ESD.
8 A input Non-inverting differential receiver input from the RS-485/RS-422 bus. 1/8 unit-load, RIN ≈ 96kΩ. Common-mode range −7V to +12V. ±15kV HBM ESD.

Key specifications

Parameter Value
Manufacturer SIT
Package SOP-8
Category Interface
Pins 8

Ordering variants

Same part, different packaging or reel option.

  • SIT3490EESA
  • SIT3490EESAEEPA
  • SIT3490EESAEEUA

CAD (KiCad official)

  • Symbol: SIT3490EESA
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOP-8 (KiCad packages3D, STEP)
  • 3D model files: sit3490eesa-etched.step / sit3490eesa-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); sit3490eesa.step / sit3490eesa.glb are the bare package body.

3D model downloads

Two STEP files. Same geometry, different body top:

File Size Use it when
sit3490eesa.step 122 KB You want the bare part, or you mark your own boards.
sit3490eesa-etched.step 2.3 MB You want the part with SIT3490EESA already on it.

The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 577 faces against 147 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: SIT datasheet (13 pp, sha256 4e2651818bcb1ad0, retrieved 2026-08-17, tier: lcsc)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF