SIT3088EEUA

{
 "schema": "adom.pads/1",
 "slug": "sit3088eeua",
 "footprint": "MSOP-8_3x3mm_P0.65mm",
 "generated_from": {
  "footprint": "MSOP-8_3x3mm_P0.65mm@sha256:c85207be7edf4b5e",
  "pins": "page.json:component.pins",
  "overrides": null
 },
 "pin1": {
  "pad": "1",
  "at": [
   -2.1125,
   -0.975
  ],
  "corner": "top-left",
  "source": "silk-marker",
  "derived_from": "MSOP-8_3x3mm_P0.65mm@sha256:c85207be7edf4b5e"
 },
 "pad_count": 8,
 "symbol_pins": [
  "1",
  "2",
  "3",
  "4",
  "5",
  "6",
  "7",
  "8"
 ],
 "paste_apertures": 0,
 "issues": [],
 "pads": [
  {
   "pad": "1",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -2.1125,
    -0.975
   ],
   "rot": 0.0,
   "size": [
    1.625,
    0.4
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "1",
   "name": "RO",
   "type": "output",
   "description": "Receiver Output. When /RE is low and (A - B) >= -10 mV, RO is high; when (A - B) <= -200 mV, RO is low. High-impedance when /RE is high.",
   "is_pin1": true,
   "source": {
    "geometry": "MSOP-8_3x3mm_P0.65mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "2",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -2.1125,
    -0.325
   ],
   "rot": 0.0,
   "size": [
    1.625,
    0.4
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "2",
   "name": "/RE",
   "type": "input",
   "description": "Receiver Output Enable (active low). Drive /RE low to enable RO; RO is high-impedance when /RE is high. Drive /RE high and DE low to enter low-power shutdown mode.",
   "is_pin1": false,
   "source": {
    "geometry": "MSOP-8_3x3mm_P0.65mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "3",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -2.1125,
    0.325
   ],
   "rot": 0.0,
   "size": [
    1.625,
    0.4
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "3",
   "name": "DE",
   "type": "input",
   "description": "Driver Output Enable (active high). Drive DE high to enable driver outputs A and B; outputs are high-impedance when DE is low. Drive /RE high and DE low to enter low-power shutdown mode.",
   "is_pin1": false,
   "source": {
    "geometry": "MSOP-8_3x3mm_P0.65mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "4",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -2.1125,
    0.975
   ],
   "rot": 0.0,
   "size": [
    1.625,
    0.4
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "4",
   "name": "DI",
   "type": "input",
   "description": "Driver Input. With DE high, a low on DI forces A low and B high; a high on DI forces A high and B low.",
   "is_pin1": false,
   "source": {
    "geometry": "MSOP-8_3x3mm_P0.65mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "5",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    2.1125,
    0.975
   ],
   "rot": 0.0,
   "size": [
    1.625,
    0.4
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "5",
   "name": "GND",
   "type": "power_in",
   "description": "Ground reference for the device. All voltages are referenced to this pin.",
   "is_pin1": false,
   "source": {
    "geometry": "MSOP-8_3x3mm_P0.65mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "6",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    2.1125,
    0.325
   ],
   "rot": 0.0,
   "size": [
    1.625,
    0.4
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "6",
   "name": "A",
   "type": "bidirectional",
   "description": "Non-inverting receiver input and non-inverting driver output (RS-485/RS-422 bus line A). Withstands -15V to +15V bus fault, 15kV HBM ESD protected.",
   "is_pin1": false,
   "source": {
    "geometry": "MSOP-8_3x3mm_P0.65mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "7",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    2.1125,
    -0.325
   ],
   "rot": 0.0,
   "size": [
    1.625,
    0.4
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "7",
   "name": "B",
   "type": "bidirectional",
   "description": "Inverting receiver input and inverting driver output (RS-485/RS-422 bus line B). Withstands -15V to +15V bus fault, 15kV HBM ESD protected.",
   "is_pin1": false,
   "source": {
    "geometry": "MSOP-8_3x3mm_P0.65mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "8",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    2.1125,
    -0.975
   ],
   "rot": 0.0,
   "size": [
    1.625,
    0.4
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "8",
   "name": "VCC",
   "type": "power_in",
   "description": "Positive supply, 3.0 V to 5.5 V operating range (6.5 V absolute max). Bypass locally to GND with a 0.1 µF ceramic capacitor.",
   "is_pin1": false,
   "source": {
    "geometry": "MSOP-8_3x3mm_P0.65mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  }
 ]
}