main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers sit1602bi-72-33e-66-666600: viewers · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray
sit1602bi-72-33e-66-666600-etched.glb Publish 0.1.0 · Ray
sit1602bi-72-33e-66-666600-etched.step sit1602bi-72-33e-66-666600: factory component page (tier=lcsc) · Ray
sit1602bi-72-33e-66-666600-hero.glb sit1602bi-72-33e-66-666600: hero GLB from the etched model (keeps the MPN mark) · Ray
sit1602bi-72-33e-66-666600-hero.overlay.json Publish 0.1.0 · Ray
sit1602bi-72-33e-66-666600.glb Publish 0.1.0 · Ray
sit1602bi-72-33e-66-666600.kicad_mod Publish 0.1.0 · Ray
sit1602bi-72-33e-66-666600.kicad_sym Publish 0.1.0 · Ray
sit1602bi-72-33e-66-666600.lbr Publish 0.1.0 · Ray
sit1602bi-72-33e-66-666600.step Publish 0.1.0 · Ray

SiT1602BI-72-33E-66.666600

SiTime · Pre-programmed Oscillators · SMD2016-4P

SiT1602BI-72-33E-66.666600 from SiTime, in a SMD2016-4P. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OE/ST/NC input Output Enable (this MPN's feature code 'E'): logic high gives the specified frequency output and logic low puts the output in high impedance; a pull-up of 10 kΩ or less is recommended if pin 1 is not externally driven.
2 GND power_in Electrical ground.
3 OUT output Oscillator clock output.
4 VDD power_in Power supply voltage; a capacitor of 0.1 µF or higher between Vdd and GND is required.

Key specifications

Parameter Value
Manufacturer SiTime
Package SMD2016-4P
Category Crystals/Oscillators/Resonators
Pins 4

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Frequency Stability F_stab -25 25 ppm Inclusive of initial tolerance at 25°C, 1st year aging, and variations over temperature, supply and load 1
Supply Voltage Vdd 2.97 3.3 3.63 V 3.3V ±10% option 1
Operating Temperature Range T_use -40 85 °C Industrial 1
Current Consumption Idd 3.8 4.5 mA No load condition, f = 20 MHz, Vdd = 2.8V to 3.3V 1
OE Disable Current I_OD 4.2 mA Vdd = 2.5V to 3.3V, OE = GND, Output in high-Z state 1
Standby Current I_std 2.6 4.3 A ST = GND, Vdd = 2.8V to 3.3V, Output is weakly pulled down 1
Duty Cycle DC 45 55 % All Vdds 1
Rise/Fall Time Tr, Tf 1 2 ns Vdd = 2.5V, 2.8V, 3.0V or 3.3V, 20% - 80% 1
Output High Voltage VOH 90 Vdd IOH = -4 mA (Vdd = 3.0V or 3.3V) 1
Output Low Voltage VOL 10 % Vdd IOL = 4 mA (Vdd = 3.0V or 3.3V) 1
Input High Voltage VIH 70 Vdd Pin 1, OE or ST 2
Input Low Voltage VIL 30 Vdd Pin 1, OE or ST 2
Input Pull-up Impedance Z_in 50 87 150 k Pin 1, OE logic high or logic low 2
Startup Time T_start 5 ms Measured from the time Vdd reaches its rated minimum value 2
Enable/Disable Time T_oe 138 ns f = 77.76 MHz. For other frequencies, T_oe = 100 ns + 3 * cycles 2
RMS Period Jitter T_jitt 1.8 3 ps f = 75 MHz, Vdd = 2.5V, 2.8V, 3.0V or 3.3V 2
Peak-to-peak Period Jitter T_pk 12 25 ps f = 75 MHz, Vdd = 2.5V, 2.8V, 3.0V or 3.3V 2
RMS Phase Jitter (random) T_phj 0.5 0.9 ps f = 75 MHz, Integration bandwidth = 900 kHz to 7.5 MHz 2
RMS Phase Jitter (random) T_phj 1.3 2 ps f = 75 MHz, Integration bandwidth = 12 kHz to 20 MHz 2
Storage Temperature -65 150 °C 3
Supply Voltage Vdd -0.5 4 V 3
Electrostatic Discharge 2000 V 3
Soldering Temperature 260 °C Follow standard Pb free soldering guidelines 3
Junction Temperature 150 °C 3
Thermal Resistance Junction-to-Ambient (4 Layer Board) θJA 152 °C/W 2016 package, JESD51 reference layout, 4 layer board 3
Thermal Resistance Junction-to-Ambient (2 Layer Board) θJA 252 °C/W 2016 package, JESD51 reference layout, 2 layer board 3
Thermal Resistance Junction-to-Case (Bottom) θJC 36 °C/W 2016 package 3
Maximum Operating Junction Temperature 95 °C Max operating ambient temperature 85°C 3

CAD (KiCad official)

  • Symbol: SiT1602BI-72-33E-66.666600
  • Footprint: Crystal:Crystal_SMD_2016-4Pin_2.0x1.6mm
  • 3D model: SMD2016-4P (KiCad packages3D, STEP)
  • 3D model files: sit1602bi-72-33e-66-666600-etched.step / sit1602bi-72-33e-66-666600-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); sit1602bi-72-33e-66-666600.step / sit1602bi-72-33e-66-666600.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: SiTime datasheet (17 pp, sha256 d829a6872da0ca5a, retrieved 2026-10-28, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF