main
Ray
Publish 0.1.0
6769b59
SiT1602BI-72-33E-66.660000
SiTime · Pre-programmed Oscillators · SMD2016-4P
SiT1602BI-72-33E-66.660000 from SiTime, in a SMD2016-4P. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OE/ST/NC | input | Factory-programmed as Output Enable (OE), where logic low puts the output in high impedance, Standby (ST), where logic low puts the device in sleep mode with output weakly pulled low, or No Connect (NC), where the pin has no function; a pull-up resistor of 10 kΩ or less is recommended in OE or ST mode if the pin is not externally driven. |
| 2 | GND | power_in | Electrical ground. |
| 3 | OUT | output | Oscillator clock output at the specified frequency, LVCMOS/HCMOS compatible. |
| 4 | VDD | power_in | Power supply voltage (1.62 V to 3.63 V across the supported supply options); a capacitor of 0.1 µF or higher between VDD and GND is required. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | SiTime |
| Package | SMD2016-4P |
| Category | Crystals/Oscillators/Resonators |
| Pins | 4 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Frequency Stability | F_stab | -25 | 25 | ppm | Inclusive of initial tolerance at 25°C, 1st year aging at 25°C, and variations over operating temperature, rated power supply voltage and load. | 1 | |
| Supply Voltage | Vdd | 2.97 | 3.3 | 3.63 | V | 1 | |
| Operating Temperature Range (Industrial) | T_use | -40 | 85 | °C | Industrial | 1 | |
| Current Consumption | Idd | 3.8 | 4.5 | mA | No load condition, f = 20 MHz, Vdd = 2.8V to 3.3V | 1 | |
| OE Disable Current | I_OD | 4.2 | mA | Vdd = 2.5V to 3.3V, OE = GND, Output in high-Z state | 1 | ||
| Standby Current | I_std | 2.6 | 4.3 | A | ST = GND, Vdd = 2.8V to 3.3V, Output is weakly pulled down | 1 | |
| Duty Cycle | DC | 45 | 55 | % | All Vdds. See Duty Cycle definition in Figure 3 and Footnote 6 | 1 | |
| Rise/Fall Time | Tr, Tf | 1 | 2 | ns | Vdd = 2.5V, 2.8V, 3.0V or 3.3V, 20% - 80% | 1 | |
| Output High Voltage | VOH | 90 | % Vdd | IOH = -4 mA (Vdd = 3.0V or 3.3V) | 1 | ||
| Output Low Voltage | VOL | 10 | % Vdd | IOL = 4 mA (Vdd = 3.0V or 3.3V) | 1 | ||
| Input High Voltage | VIH | 70 | % Vdd | Pin 1, OE or ST | 2 | ||
| Input Low Voltage | VIL | 30 | % Vdd | Pin 1, OE or ST | 2 | ||
| Input Pull-up Impedance | Z_in | 50 | 87 | 150 | k | Pin 1, OE logic high or logic low, or ST logic high | 2 |
| Startup Time | T_start | 5 | ms | Measured from the time Vdd reaches its rated minimum value | 2 | ||
| Enable/Disable Time | T_oe | 138 | ns | f = 77.76 MHz. For other frequencies, T_oe = 100 ns + 3 * cycles | 2 | ||
| Resume Time | T_resume | 5 | ms | Measured from the time ST pin crosses 50% threshold | 2 | ||
| RMS Period Jitter | T_jitt | 1.8 | 3 | ps | f = 75 MHz, Vdd = 2.5V, 2.8V, 3.0V or 3.3V | 2 | |
| Peak-to-peak Period Jitter | T_pk | 12 | 25 | ps | f = 75 MHz, Vdd = 2.5V, 2.8V, 3.0V or 3.3V | 2 | |
| RMS Phase Jitter (random) | T_phj | 0.5 | 0.9 | ps | f = 75 MHz, Integration bandwidth = 900 kHz to 7.5 MHz | 2 | |
| RMS Phase Jitter (random) | T_phj | 1.3 | 2 | ps | f = 75 MHz, Integration bandwidth = 12 kHz to 20 MHz | 2 | |
| Storage Temperature | -65 | 150 | °C | 3 | |||
| Supply Voltage (absolute maximum) | Vdd | -0.5 | 4 | V | 3 | ||
| Electrostatic Discharge | 2000 | V | 3 | ||||
| Soldering Temperature | 260 | °C | Follow standard Pb free soldering guidelines | 3 | |||
| Junction Temperature | 150 | °C | 3 | ||||
| Thermal Resistance JA, 4 Layer Board (2016 package) | JA | 152 | °C/W | 2016 package, 4 Layer Board | 3 | ||
| Thermal Resistance JA, 2 Layer Board (2016 package) | JA | 252 | °C/W | 2016 package, 2 Layer Board | 3 | ||
| Thermal Resistance JC, Bottom (2016 package) | JC | 36 | °C/W | 2016 package, Bottom | 3 | ||
| Maximum Operating Junction Temperature | 95 | °C | Maximum operating ambient temperature 85°C | 3 |
CAD (KiCad official)
- Symbol:
SiT1602BI-72-33E-66.660000 - Footprint:
Crystal:Crystal_SMD_2016-4Pin_2.0x1.6mm - 3D model: SMD2016-4P (KiCad packages3D, STEP)
- 3D model files:
sit1602bi-72-33e-66-660000-etched.step/sit1602bi-72-33e-66-660000-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);sit1602bi-72-33e-66-660000.step/sit1602bi-72-33e-66-660000.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: SiTime datasheet (17 pp, sha256
d829a6872da0ca5a, retrieved 2026-10-28, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# SiT1602BI-72-33E-66.660000
**SiTime** · Pre-programmed Oscillators · SMD2016-4P
SiT1602BI-72-33E-66.660000 from SiTime, in a SMD2016-4P. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OE/ST/NC | input | Factory-programmed as Output Enable (OE), where logic low puts the output in high impedance, Standby (ST), where logic low puts the device in sleep mode with output weakly pulled low, or No Connect (NC), where the pin has no function; a pull-up resistor of 10 kΩ or less is recommended in OE or ST mode if the pin is not externally driven. |
| 2 | GND | power_in | Electrical ground. |
| 3 | OUT | output | Oscillator clock output at the specified frequency, LVCMOS/HCMOS compatible. |
| 4 | VDD | power_in | Power supply voltage (1.62 V to 3.63 V across the supported supply options); a capacitor of 0.1 µF or higher between VDD and GND is required. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | SiTime |
| Package | SMD2016-4P |
| Category | Crystals/Oscillators/Resonators |
| Pins | 4 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Frequency Stability | F_stab | -25 | | 25 | ppm | Inclusive of initial tolerance at 25°C, 1st year aging at 25°C, and variations over operating temperature, rated power supply voltage and load. | 1 |
| Supply Voltage | Vdd | 2.97 | 3.3 | 3.63 | V | | 1 |
| Operating Temperature Range (Industrial) | T_use | -40 | | 85 | °C | Industrial | 1 |
| Current Consumption | Idd | | 3.8 | 4.5 | mA | No load condition, f = 20 MHz, Vdd = 2.8V to 3.3V | 1 |
| OE Disable Current | I_OD | | | 4.2 | mA | Vdd = 2.5V to 3.3V, OE = GND, Output in high-Z state | 1 |
| Standby Current | I_std | | 2.6 | 4.3 | A | ST = GND, Vdd = 2.8V to 3.3V, Output is weakly pulled down | 1 |
| Duty Cycle | DC | 45 | | 55 | % | All Vdds. See Duty Cycle definition in Figure 3 and Footnote 6 | 1 |
| Rise/Fall Time | Tr, Tf | | 1 | 2 | ns | Vdd = 2.5V, 2.8V, 3.0V or 3.3V, 20% - 80% | 1 |
| Output High Voltage | VOH | 90 | | | % Vdd | IOH = -4 mA (Vdd = 3.0V or 3.3V) | 1 |
| Output Low Voltage | VOL | | | 10 | % Vdd | IOL = 4 mA (Vdd = 3.0V or 3.3V) | 1 |
| Input High Voltage | VIH | 70 | | | % Vdd | Pin 1, OE or ST | 2 |
| Input Low Voltage | VIL | | | 30 | % Vdd | Pin 1, OE or ST | 2 |
| Input Pull-up Impedance | Z_in | 50 | 87 | 150 | k | Pin 1, OE logic high or logic low, or ST logic high | 2 |
| Startup Time | T_start | | | 5 | ms | Measured from the time Vdd reaches its rated minimum value | 2 |
| Enable/Disable Time | T_oe | | | 138 | ns | f = 77.76 MHz. For other frequencies, T_oe = 100 ns + 3 * cycles | 2 |
| Resume Time | T_resume | | | 5 | ms | Measured from the time ST pin crosses 50% threshold | 2 |
| RMS Period Jitter | T_jitt | | 1.8 | 3 | ps | f = 75 MHz, Vdd = 2.5V, 2.8V, 3.0V or 3.3V | 2 |
| Peak-to-peak Period Jitter | T_pk | | 12 | 25 | ps | f = 75 MHz, Vdd = 2.5V, 2.8V, 3.0V or 3.3V | 2 |
| RMS Phase Jitter (random) | T_phj | | 0.5 | 0.9 | ps | f = 75 MHz, Integration bandwidth = 900 kHz to 7.5 MHz | 2 |
| RMS Phase Jitter (random) | T_phj | | 1.3 | 2 | ps | f = 75 MHz, Integration bandwidth = 12 kHz to 20 MHz | 2 |
| Storage Temperature | | -65 | | 150 | °C | | 3 |
| Supply Voltage (absolute maximum) | Vdd | -0.5 | | 4 | V | | 3 |
| Electrostatic Discharge | | | | 2000 | V | | 3 |
| Soldering Temperature | | | | 260 | °C | Follow standard Pb free soldering guidelines | 3 |
| Junction Temperature | | | | 150 | °C | | 3 |
| Thermal Resistance JA, 4 Layer Board (2016 package) | JA | | 152 | | °C/W | 2016 package, 4 Layer Board | 3 |
| Thermal Resistance JA, 2 Layer Board (2016 package) | JA | | 252 | | °C/W | 2016 package, 2 Layer Board | 3 |
| Thermal Resistance JC, Bottom (2016 package) | JC | | 36 | | °C/W | 2016 package, Bottom | 3 |
| Maximum Operating Junction Temperature | | | | 95 | °C | Maximum operating ambient temperature 85°C | 3 |
## CAD (KiCad official)
- Symbol: `SiT1602BI-72-33E-66.660000`
- Footprint: `Crystal:Crystal_SMD_2016-4Pin_2.0x1.6mm`
- 3D model: SMD2016-4P (KiCad packages3D, STEP)
- 3D model files: `sit1602bi-72-33e-66-660000-etched.step` / `sit1602bi-72-33e-66-660000-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `sit1602bi-72-33e-66-660000.step` / `sit1602bi-72-33e-66-660000.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [SiTime datasheet](docs/sit1602bi-72-33e-66-660000-datasheet.pdf) (17 pp, sha256 `d829a6872da0ca5a`, retrieved 2026-10-28, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/sit1602bi-72-33e-66-660000-datasheet.pdf)