main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers sit1602bi-72-33e-54-000000: viewers · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray
sit1602bi-72-33e-54-000000-etched.glb Publish 0.1.0 · Ray
sit1602bi-72-33e-54-000000-etched.step sit1602bi-72-33e-54-000000: factory component page (tier=lcsc) · Ray
sit1602bi-72-33e-54-000000-hero.glb sit1602bi-72-33e-54-000000: hero GLB from the etched model (keeps the MPN mark) · Ray
sit1602bi-72-33e-54-000000-hero.overlay.json Publish 0.1.0 · Ray
sit1602bi-72-33e-54-000000.glb Publish 0.1.0 · Ray
sit1602bi-72-33e-54-000000.kicad_mod Publish 0.1.0 · Ray
sit1602bi-72-33e-54-000000.kicad_sym Publish 0.1.0 · Ray
sit1602bi-72-33e-54-000000.lbr Publish 0.1.0 · Ray
sit1602bi-72-33e-54-000000.step Publish 0.1.0 · Ray

SiT1602BI-72-33E-54.000000

SiTime · Pre-programmed Oscillators · SMD2016-4P

SiT1602BI-72-33E-54.000000 from SiTime, in a SMD2016-4P. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OE/ST/NC input In OE mode (MPN code E), logic H gives the specified frequency output and logic L puts the output in high impedance, and a pull-up resistor of 10 kΩ or less is recommended if pin 1 is not externally driven.
2 GND power_in Electrical ground; a capacitor of 0.1 µF or higher between Vdd and GND is required.
3 OUT output Oscillator clock output (LVCMOS/HCMOS compatible) at the specified frequency.
4 VDD power_in Power supply voltage; for this MPN the rated supply is 3.3 V (2.97 V to 3.63 V), and a 0.1 µF or higher capacitor between Vdd and GND is required.

Key specifications

Parameter Value
Manufacturer SiTime
Package SMD2016-4P
Category Crystals/Oscillators/Resonators
Pins 4

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Frequency Stability F_stab -25 25 ppm Inclusive of initial tolerance at 25°C, 1st year aging at 25°C, and variations over operating temperature, rated power supply voltage and load. 1
Operating Temperature Range (Industrial) T_use -40 85 °C Industrial 1
Supply Voltage Vdd 2.97 3.3 3.63 V 1
Current Consumption Idd 3.8 4.5 mA No load condition, f = 20 MHz, Vdd = 2.8V to 3.3V 1
OE Disable Current I_OD 4.2 mA Vdd = 2.5V to 3.3V, OE = GND, Output in high-Z state 1
Duty Cycle DC 45 55 % All Vdds 1
Rise/Fall Time Tr, Tf 1 2 ns Vdd = 2.5V, 2.8V, 3.0V or 3.3V, 20% - 80% 1
Rise/Fall Time Tr, Tf 2 ns Vdd = 2.25V - 3.63V, 20% - 80% 1
Output High Voltage VOH 90 % Vdd IOH = -4 mA (Vdd = 3.0V or 3.3V) 1
Output Low Voltage VOL 10 % Vdd IOL = 4 mA (Vdd = 3.0V or 3.3V) 1
Input High Voltage VIH 70 % Vdd Pin 1, OE or ST 2
Input Low Voltage VIL 30 % Vdd Pin 1, OE or ST 2
Input Pull-up Impedance Z_in 50 87 150 k Pin 1, OE logic high or logic low, or ST logic high 2
Startup Time T_start 5 ms Measured from the time Vdd reaches its rated minimum value 2
Enable/Disable Time T_oe 138 ns f = 77.76 MHz. For other frequencies, T_oe = 100 ns + 3 * cycles 2
RMS Period Jitter T_jitt 1.8 3 ps f = 75 MHz, Vdd = 2.5V, 2.8V, 3.0V or 3.3V 2
Peak-to-peak Period Jitter T_pk 12 25 ps f = 75 MHz, Vdd = 2.5V, 2.8V, 3.0V or 3.3V 2
RMS Phase Jitter (random) T_phj 0.5 0.9 ps f = 75 MHz, Integration bandwidth = 900 kHz to 7.5 MHz 2
RMS Phase Jitter (random) T_phj 1.3 2 ps f = 75 MHz, Integration bandwidth = 12 kHz to 20 MHz 2
Storage Temperature -65 150 °C 3
Vdd Supply Voltage Vdd -0.5 4 V 3
Electrostatic Discharge 2000 V 3
Soldering Temperature 260 °C Follow standard Pb free soldering guidelines 3
Junction Temperature 150 °C 3
Thermal Resistance Junction-to-Ambient JA 152 °C/W 4 Layer Board, 2016 package 3
Thermal Resistance Junction-to-Ambient JA 252 °C/W 2 Layer Board, 2016 package 3
Thermal Resistance Junction-to-Case (Bottom) JC 36 °C/W Bottom, 2016 package 3
Maximum Operating Junction Temperature 95 °C Max operating ambient 85°C 3

CAD (KiCad official)

  • Symbol: SiT1602BI-72-33E-54.000000
  • Footprint: Crystal:Crystal_SMD_2016-4Pin_2.0x1.6mm
  • 3D model: SMD2016-4P (KiCad packages3D, STEP)
  • 3D model files: sit1602bi-72-33e-54-000000-etched.step / sit1602bi-72-33e-54-000000-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); sit1602bi-72-33e-54-000000.step / sit1602bi-72-33e-54-000000.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: SiTime datasheet (17 pp, sha256 d829a6872da0ca5a, retrieved 2026-10-28, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF