Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

SiT1602BI-72-33E-33.300000

SiTime · Pre-programmed Oscillators · SMD2016-4P

SiT1602BI-72-33E-33.300000 from SiTime, in a SMD2016-4P. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OE/ST/NC input Output Enable (H: output active, L: output high-Z), Standby (L: output weakly pulled low, sleep mode with supply current reduced to I_std), or No Connect (no function) depending on factory option; this part is the 'E' (Output Enable) option, VIH min 70% Vdd, VIL max 30% Vdd.
2 GND power_in Electrical ground.
3 OUT output LVCMOS oscillator output, with VOH min 90% Vdd and VOL max 10% Vdd.
4 VDD power_in Power supply voltage, 2.97 V to 3.63 V for the 3.3 V option; a 0.1 µF or higher capacitor between Vdd and GND is required.

Key specifications

Parameter Value
Manufacturer SiTime
Package SMD2016-4P
Category Crystals/Oscillators/Resonators
Pins 4

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Frequency Stability F_stab -25 25 ppm Inclusive of initial tolerance at 25°C, 1st year aging at 25°C, and variations over operating temperature, rated power supply voltage and load. 1
Supply Voltage Vdd 2.97 3.3 3.63 V 3.3V ±10% 1
Operating Temperature Range (Industrial) T_use -40 85 °C Industrial 1
Current Consumption Idd 3.8 4.5 mA No load condition, f = 20 MHz, Vdd = 2.8V to 3.3V 1
OE Disable Current I_OD 4.2 mA Vdd = 2.5V to 3.3V, OE = GND, Output in high-Z state 1
Duty Cycle DC 45 55 % All Vdds. See Duty Cycle definition in Figure 3 and Footnote 6 1
Rise/Fall Time Tr, Tf 1 2 ns Vdd = 2.5V, 2.8V, 3.0V or 3.3V, 20% - 80% 1
Output High Voltage VOH 90 Vdd IOH = -4 mA (Vdd = 3.0V or 3.3V); printed as 90% Vdd 1
Output Low Voltage VOL 10 Vdd IOL = 4 mA (Vdd = 3.0V or 3.3V); printed as 10% Vdd 1
Input High Voltage VIH 70 Vdd Pin 1, OE or ST; printed as 70% Vdd 2
Input Low Voltage VIL 30 Vdd Pin 1, OE or ST; printed as 30% Vdd 2
Input Pull-up Impedance Z_in 50 87 150 kΩ Pin 1, OE logic high or logic low, or ST logic high 2
Startup Time T_start 5 ms Measured from the time Vdd reaches its rated minimum value 2
Enable/Disable Time T_oe 138 ns f = 77.76 MHz. For other frequencies, T_oe = 100 ns + 3 * cycles 2
RMS Period Jitter T_jitt 1.8 3 ps f = 75 MHz, Vdd = 2.5V, 2.8V, 3.0V or 3.3V 2
Peak-to-peak Period Jitter T_pk 12 25 ps f = 75 MHz, Vdd = 2.5V, 2.8V, 3.0V or 3.3V 2
RMS Phase Jitter (random) T_phj 0.5 0.9 ps f = 75 MHz, Integration bandwidth = 900 kHz to 7.5 MHz 2
RMS Phase Jitter (random) T_phj 1.3 2 ps f = 75 MHz, Integration bandwidth = 12 kHz to 20 MHz 2
Storage Temperature -65 150 °C 3
Supply Voltage (absolute maximum) Vdd -0.5 4 V 3
Electrostatic Discharge 2000 V 3
Soldering Temperature 260 °C follow standard Pb free soldering guidelines 3
Junction Temperature 150 °C Exceeding this temperature for extended period of time may damage the device 3
Maximum Operating Junction Temperature 95 °C Max operating ambient temperature 85°C 3
Thermal Resistance Junction-Ambient, 4 Layer Board θJA 152 °C/W 2016 package, 4 layer board 3
Thermal Resistance Junction-Ambient, 2 Layer Board θJA 252 °C/W 2016 package, 2 layer board 3
Thermal Resistance Junction-Case, Bottom θJC 36 °C/W 2016 package 3

CAD (KiCad official)

  • Symbol: SiT1602BI-72-33E-33.300000
  • Footprint: Crystal:Crystal_SMD_2016-4Pin_2.0x1.6mm
  • 3D model: SMD2016-4P (KiCad packages3D, STEP)
  • 3D model files: sit1602bi-72-33e-33-300000-etched.step / sit1602bi-72-33e-33-300000-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); sit1602bi-72-33e-33-300000.step / sit1602bi-72-33e-33-300000.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: SiTime datasheet (17 pp, sha256 d829a6872da0ca5a, retrieved 2026-10-24, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF