3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownSiT1602BI-72-33E-26.000000
SiTime · Pre-programmed Oscillators · SMD2016-4P
SiT1602BI-72-33E-26.000000 from SiTime, in a SMD2016-4P. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OE/ST/NC | input | Output enable pin for this OE-mode part: logic high gives the specified frequency output, while logic low puts the output in high impedance by disabling only the output driver, and a pull-up of 10 kΩ or less is recommended if the pin is not externally driven. |
| 2 | GND | power_in | Electrical ground for the oscillator; a 0.1 µF or higher capacitor is required between VDD and GND. |
| 3 | OUT | output | Oscillator clock output, LVCMOS/HCMOS compatible and specified with a 15 pF output load. |
| 4 | VDD | power_in | Power supply voltage pin; a 0.1 µF or higher decoupling capacitor between VDD and GND is required. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | SiTime |
| Package | SMD2016-4P |
| Category | Crystals/Oscillators/Resonators |
| Pins | 4 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Frequency Stability (±25 ppm option) | F_stab | -25 | 25 | ppm | Inclusive of initial tolerance at 25°C, 1st year aging at 25°C, and variations over operating temperature, rated power supply voltage and load | 1 | |
| Operating Temperature Range (Industrial) | T_use | -40 | 85 | °C | Industrial | 1 | |
| Supply Voltage (3.3V ±10%) | Vdd | 2.97 | 3.3 | 3.63 | V | 1 | |
| Current Consumption | Idd | 3.8 | 4.5 | mA | No load condition, f = 20 MHz, Vdd = 2.8V to 3.3V | 1 | |
| OE Disable Current | I_OD | 4.2 | mA | Vdd = 2.5V to 3.3V, OE = GND, Output in high-Z state | 1 | ||
| Duty Cycle | DC | 45 | 55 | % | All Vdds. See Duty Cycle definition in Figure 3 and Footnote 6 | 1 | |
| Rise/Fall Time (20% - 80%) | Tr, Tf | 1 | 2 | ns | Vdd = 2.5V, 2.8V, 3.0V or 3.3V, 20% - 80% | 1 | |
| Rise/Fall Time (20% - 80%) | Tr, Tf | 2 | ns | Vdd = 2.25V - 3.63V, 20% - 80% | 1 | ||
| Output High Voltage | VOH | 90 | % Vdd | IOH = -4 mA (Vdd = 3.0V or 3.3V) | 1 | ||
| Output Low Voltage | VOL | 10 | % Vdd | IOL = 4 mA (Vdd = 3.0V or 3.3V) | 1 | ||
| Input High Voltage | VIH | 70 | % Vdd | Pin 1, OE or ST | 2 | ||
| Input Low Voltage | VIL | 30 | % Vdd | Pin 1, OE or ST | 2 | ||
| Input Pull-up Impedance | Z_in | 50 | 87 | 150 | k | Pin 1, OE logic high or logic low | 2 |
| Startup Time | T_start | 5 | ms | Measured from the time Vdd reaches its rated minimum value | 2 | ||
| Enable/Disable Time | T_oe | 138 | ns | f = 77.76 MHz. For other frequencies, T_oe = 100 ns + 3 * cycles | 2 | ||
| RMS Period Jitter | T_jitt | 1.8 | 3 | ps | f = 75 MHz, Vdd = 2.5V, 2.8V, 3.0V or 3.3V | 2 | |
| Peak-to-peak Period Jitter | T_pk | 12 | 25 | ps | f = 75 MHz, Vdd = 2.5V, 2.8V, 3.0V or 3.3V | 2 | |
| RMS Phase Jitter (random) | T_phj | 0.5 | 0.9 | ps | f = 75 MHz, Integration bandwidth = 900 kHz to 7.5 MHz | 2 | |
| RMS Phase Jitter (random) | T_phj | 1.3 | 2 | ps | f = 75 MHz, Integration bandwidth = 12 kHz to 20 MHz | 2 | |
| Storage Temperature | -65 | 150 | °C | 3 | |||
| Supply Voltage Vdd (absolute) | Vdd | -0.5 | 4 | V | 3 | ||
| Electrostatic Discharge | 2000 | V | 3 | ||||
| Soldering Temperature | 260 | °C | Follow standard Pb free soldering guidelines | 3 | |||
| Junction Temperature | 150 | °C | Exceeding this temperature for extended period of time may damage the device | 3 | |||
| Maximum Operating Junction Temperature | 95 | °C | Max operating ambient temperature 85°C | 3 | |||
| Thermal Resistance Junction-to-Ambient, 4 Layer Board (2016 package) | JA | 152 | °C/W | 4 Layer Board, JESD51 reference layout | 3 | ||
| Thermal Resistance Junction-to-Ambient, 2 Layer Board (2016 package) | JA | 252 | °C/W | 2 Layer Board, JESD51 reference layout | 3 | ||
| Thermal Resistance Junction-to-Case, Bottom (2016 package) | JC | 36 | °C/W | Bottom | 3 |
CAD (KiCad official)
- Symbol:
SiT1602BI-72-33E-26.000000 - Footprint:
Crystal:Crystal_SMD_2016-4Pin_2.0x1.6mm - 3D model: SMD2016-4P (KiCad packages3D, STEP)
- 3D model files:
sit1602bi-72-33e-26-000000-etched.step/sit1602bi-72-33e-26-000000-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);sit1602bi-72-33e-26-000000.step/sit1602bi-72-33e-26-000000.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: SiTime datasheet (17 pp, sha256
d829a6872da0ca5a, retrieved 2026-10-28, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).