Generated by kicad-footprint-generator · KiCad file format 20260206
SIT1602BI-21-XXS-12.000000D
SiTime · Pre-programmed Oscillators · SMD3225-4P
SIT1602BI-21-XXS-12.000000D from SiTime, in a SMD3225-4P. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | ~{ST} | input | Standby input (ordering code S): logic high gives the specified frequency output, logic low pulls the output low (weak pull-down) and puts the device in sleep mode with supply current reduced to I_std; VIH is 70% Vdd min and VIL is 30% Vdd max. |
| 2 | GND | power_in | Electrical ground. |
| 3 | OUT | output | Oscillator LVCMOS output. |
| 4 | VDD | power_in | Power supply voltage (2.25 V to 3.63 V for the XX option); a 0.1 µF or higher capacitor between Vdd and GND is required. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | SiTime |
| Package | SMD3225-4P |
| Category | Crystals/Oscillators/Resonators |
| Pins | 4 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Frequency Stability | F_stab | -20 | 20 | ppm | Inclusive of initial tolerance at 25°C, 1st year aging at 25°C, and variations over operating temperature, rated power supply voltage and load | 1 | |
| Operating Temperature Range (Industrial) | T_use | -40 | 85 | °C | Industrial | 1 | |
| Supply Voltage (Vdd_XX) | Vdd_XX | 2.25 | 3.63 | V | 1 | ||
| Current Consumption | Idd | 3.8 | 4.5 | mA | No load condition, f = 20 MHz, Vdd_XX | 1 | |
| Standby Current | I_std | 2.6 | 4.3 | µA | ST = GND, Vdd_XX. Output is weakly pulled down | 1 | |
| Duty Cycle | DC | 45 | 55 | % | All Vdds. See Duty Cycle definition in Figure 3 and Footnote 6 | 2 | |
| Rise/Fall Time | Tr, Tf | 2 | ns | 20% - 80% Vdd_XX | 2 | ||
| Output High Voltage | VOH | 90 | Vdd | 2 | |||
| Output Low Voltage | VOL | 10 | Vdd | 2 | |||
| Input High Voltage | VIH | 70 | Vdd | Pin 1, OE or ST | 2 | ||
| Input Low Voltage | VIL | 30 | Vdd | Pin 1, OE or ST | 2 | ||
| Input Pull-up Impedance | Z_in | 50 | 87 | 150 | kΩ | Pin 1, OE logic high or logic low, or ST logic high | 2 |
| Input Impedance, ST logic low | Z_in | 2 | MΩ | Pin 1, ST logic low | 2 | ||
| Startup Time | T_start | 5 | ms | Measured from the time Vdd reaches its rated minimum value | 2 | ||
| Resume Time | T_resume | 5 | ms | Measured from the time ST pin crosses 50% threshold | 2 | ||
| RMS Period Jitter | T_jitt | 1.8 | 3 | ps | f = 75 MHz, Vdd_XX | 2 | |
| Peak-to-peak Period Jitter | T_pk | 12 | 25 | ps | f = 75 MHz, Vdd_XX | 2 | |
| RMS Phase Jitter (random) | T_phj | 0.5 | 0.9 | ps | f = 75 MHz, Integration bandwidth = 900 kHz to 7.5 MHz. Vdd_XX | 2 | |
| RMS Phase Jitter (random) | T_phj | 1.3 | 2 | ps | f = 75 MHz, Integration bandwidth = 12 kHz to 20 MHz. Vdd_XX | 2 | |
| Storage Temperature | -65 | 150 | °C | 3 | |||
| Vdd | Vdd | -0.5 | 4 | V | 3 | ||
| Electrostatic Discharge | 2000 | V | 3 | ||||
| Soldering Temperature | 260 | °C | follow standard Pb free soldering guidelines | 3 | |||
| Junction Temperature | 150 | °C | 3 | ||||
| Maximum Operating Junction Temperature | 95 | °C | Max operating temperature (ambient) 85°C | 3 | |||
| Thermal Resistance JA, 4 Layer Board | θJA | 109 | °C/W | Package 3225 | 3 | ||
| Thermal Resistance JA, 2 Layer Board | θJA | 212 | °C/W | Package 3225 | 3 | ||
| Thermal Resistance JC, Bottom | θJC | 27 | °C/W | Package 3225 | 3 | ||
| Output Frequency | f | 12 | MHz | Nominal frequency per MPN (12.000000) | 13 |
CAD (KiCad official)
- Symbol:
SIT1602BI-21-XXS-12.000000D - Footprint:
Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm - 3D model: SMD3225-4P (KiCad packages3D, STEP)
- 3D model files:
sit1602bi-21-xxs-12-000000d-etched.step/sit1602bi-21-xxs-12-000000d-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);sit1602bi-21-xxs-12-000000d.step/sit1602bi-21-xxs-12-000000d.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: SiTime datasheet (18 pp, sha256
70f0fbf9f24afbd0, retrieved 2026-10-30, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).