main
Ray Publish 0.1.0 1e943ef

SIT1602BI-21-33E-25.000000D

SiTime · Pre-programmed Oscillators · SMD3225-4P

SIT1602BI-21-33E-25.000000D from SiTime, in a SMD3225-4P. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OE/ST/NC input Output enable for this ordering code (feature pin E): logic High gives the specified frequency output, logic Low puts the output in high impedance with only the output driver disabled, VIH is 70% Vdd and VIL is 30% Vdd, and a pull-up of 10 kΩ or less is recommended if the pin is not externally driven.
2 GND power_in Electrical ground for the device, and a capacitor of 0.1 µF or higher is required between Vdd and GND.
3 OUT output Oscillator clock output, LVCMOS/HCMOS compatible, with a 20% to 80% rise/fall time of 2 ns maximum at Vdd_3.3 and a duty cycle of 45% to 55%.
4 VDD power_in Power supply voltage, which for the 3.3 V option ('33' in the part number) must be 2.97 V to 3.63 V, with a 0.1 µF or higher capacitor required between Vdd and GND.

Key specifications

Parameter Value
Manufacturer SiTime
Package SMD3225-4P
Category Crystals/Oscillators/Resonators
Pins 4

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Operating Temperature Range (Industrial) T_use -40 85 °C Industrial (MPN temperature code I) 1
Frequency Stability F_stab -20 20 ppm Inclusive of initial tolerance at 25°C, 1st year aging, and variations over operating temperature, rated supply voltage and load (MPN code 1 = ±20 ppm) 1
Supply Voltage (Vdd_3.3) Vdd_3.3 2.97 3.3 3.63 V Vdd_3.3 option (MPN code 33) 1
Current Consumption Idd 3.8 4.5 mA No load condition, f = 20 MHz, Vdd_3.3 1
OE Disable Current I_OD 4.2 mA Vdd_3.3. OE = GND, Output in high-Z state 1
Standby Current I_std 2.6 4.3 µA ST = GND, Vdd_3.3. Output is weakly pulled down 1
Duty Cycle DC 45 55 % All Vdds 2
Rise/Fall Time Tr, Tf 1 2 ns 20% - 80%, Vdd_3.3 2
Output High Voltage VOH 90 %Vdd IOH = -4 mA (Vdd_3.0 and Vdd_3.3) 2
Output Low Voltage VOL 10 %Vdd IOH = -4 mA (Vdd_3.0 and Vdd_3.3) 2
Input High Voltage VIH 70 %Vdd Pin 1, OE or ST 2
Input Low Voltage VIL 30 %Vdd Pin 1, OE or ST 2
Input Pull-up Impedance Z_in 50 87 150 kΩ Pin 1, OE logic high or logic low, or ST logic high 2
Input Pull-up Impedance (ST low) Z_in 2 MΩ Pin 1, ST logic low 2
Startup Time T_start 5 ms Measured from the time Vdd reaches its rated minimum value 2
Enable/Disable Time T_oe 138 ns f = 77.76 MHz. For other frequencies, T_oe = 100 ns + 3*cycles 2
Resume Time T_resume 5 ms Measured from the time ST pin crosses 50% threshold 2
RMS Period Jitter T_jitt 1.8 3 ps f = 75 MHz, Vdd_3.3 2
Peak-to-peak Period Jitter T_pk 12 25 ps f = 75 MHz, Vdd_3.3 2
RMS Phase Jitter (random) T_phj 0.5 0.9 ps f = 75 MHz, Integration bandwidth = 900 kHz to 7.5 MHz, Vdd_3.3 2
RMS Phase Jitter (random) T_phj 1.3 2 ps f = 75 MHz, Integration bandwidth = 12 kHz to 20 MHz, Vdd_3.3 2
Storage Temperature -65 150 °C 3
Supply Voltage Vdd Vdd -0.5 4 V 3
Electrostatic Discharge 2000 V 3
Soldering Temperature 260 °C Follow standard Pb free soldering guidelines 3
Junction Temperature 150 °C Exceeding this for extended period may damage the device (note 3) 3
Maximum Operating Junction Temperature 95 °C Max operating ambient temperature 85°C 3
Thermal Resistance Junction-to-Ambient, 4 Layer Board (3225 package) JA 109 °C/W 4 Layer Board, 3225 package 3
Thermal Resistance Junction-to-Ambient, 2 Layer Board (3225 package) JA 212 °C/W 2 Layer Board, 3225 package 3
Thermal Resistance Junction-to-Case, Bottom (3225 package) JC 27 °C/W Bottom, 3225 package 3

CAD (KiCad official)

  • Symbol: SIT1602BI-21-33E-25.000000D
  • Footprint: Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm
  • 3D model: SMD3225-4P (KiCad packages3D, STEP)
  • 3D model files: sit1602bi-21-33e-25-000000d-etched.step / sit1602bi-21-33e-25-000000d-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); sit1602bi-21-33e-25-000000d.step / sit1602bi-21-33e-25-000000d.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: SiTime datasheet (18 pp, sha256 70f0fbf9f24afbd0, retrieved 2026-10-30, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF