main
Download ZIP Propose a change
Made with KiCad 10.0 · needs KiCad 10.0 or later to open · KiCad file format 20260206
Name Last commit message Last updated
docs sit1043qtk: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers sit1043qtk: viewers · Ray
package.json sit1043qtk: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
page.json sit1043qtk: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
README.md Initial commit: component/sit1043qtk · Ray
sit1043qtk-etched.fit.json sit1043qtk: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
sit1043qtk-etched.glb sit1043qtk: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
sit1043qtk-etched.step sit1043qtk: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
sit1043qtk.glb Publish 0.1.0 · Ray
sit1043qtk.kicad_mod Publish 0.1.0 · Ray
sit1043qtk.kicad_sym Publish 0.1.0 · Ray
sit1043qtk.lbr Publish 0.1.0 · Ray
sit1043qtk.step Publish 0.1.0 · Ray

SIT1043QTK

SIT · CAN Transceivers · DFN4.5x3-14

SIT1043QTK from SIT, in a DFN4.5x3-14. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 TXD input Transmitter data input accepting digital signals from 0V to VIO level to control CAN bus driver output state.
2 GND power_in Ground reference providing return path for all power supplies and signal measurements.
3 VCC power_in 5V bus power supply input with recommended operating range of 4.5V to 5.5V and maximum rating to ±6V.
4 RXD output Receiver data output providing digital signal at 0V or VIO level reflecting CAN bus dominant/recessive state.
5 VIO power_in I/O port power supply input with recommended operating range of 2.8V to 5.5V and maximum rating to ±6V.
6 EN input Enable control input; high level enables transmitter and high-speed receiver, low level enters silent/standby mode.
7 INH tri_state Inhibit output for external regulator control; driven high in normal/standby/sleep-wait modes to enable external supplies, high-impedance state in sleep mode.
8 ERRN output Error indicator output driven low to signal power-up event, wake-up request flag, or local/bus error conditions.
9 WAKE input Local wake-up input detecting valid rising or falling edge transitions at Vth(WAKE) threshold with minimum 5µs pulse duration.
10 VBAT power_in Battery power supply input with recommended operating range of 4.5V to 40V and undervoltage detection threshold of 3V to 4.3V.
11 SPLIT output Bus common-mode stabilization output providing reference bias at approximately VCC/2 in normal and silent modes for CAN differential signal biasing.
12 CANL bidirectional CAN bus low-side input/output with ±58V maximum voltage rating and ±30V common-mode input range in normal modes.
13 CANH bidirectional CAN bus high-side input/output with ±58V maximum voltage rating and ±30V common-mode input range in normal modes.
14 STBN input Standby control input; high level enables normal/silent mode operation, low level initiates low-power standby and sleep modes.
15 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer SIT
Package DFN4.5x3-14
Category Interface
Pins 15

CAD (KiCad official)

  • Symbol: SIT1043QTK
  • Footprint: Package_DFN_QFN:DFN-14-1EP_3x4.5mm_P0.65mm_EP1.65x4.25mm
  • 3D model: DFN4.5x3-14 (KiCad packages3D, STEP)
  • 3D model files: sit1043qtk-etched.step / sit1043qtk-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); sit1043qtk.step / sit1043qtk.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: SIT datasheet (29 pp, sha256 e0f1086f046ad773, retrieved 2026-09-22, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-4-6 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF