← Commit history

Initial commit: component/sit1043qtk

Ray ·e87bfda5fe ·
2 files changed +237
README.mdadded+52
@@ -0,0 +1,52 @@+# SIT1043QTK++**SIT** · CAN Transceivers · DFN4.5x3-14++SIT1043QTK from SIT, in a DFN4.5x3-14. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | TXD | input | Transmitter data input accepting digital signals from 0V to VIO level to control CAN bus driver output state. |+| 2 | GND | power_in | Ground reference providing return path for all power supplies and signal measurements. |+| 3 | VCC | power_in | 5V bus power supply input with recommended operating range of 4.5V to 5.5V and maximum rating to ±6V. |+| 4 | RXD | output | Receiver data output providing digital signal at 0V or VIO level reflecting CAN bus dominant/recessive state. |+| 5 | VIO | power_in | I/O port power supply input with recommended operating range of 2.8V to 5.5V and maximum rating to ±6V. |+| 6 | EN | input | Enable control input; high level enables transmitter and high-speed receiver, low level enters silent/standby mode. |+| 7 | INH | tri_state | Inhibit output for external regulator control; driven high in normal/standby/sleep-wait modes to enable external supplies, high-impedance state in sleep mode. |+| 8 | ERRN | output | Error indicator output driven low to signal power-up event, wake-up request flag, or local/bus error conditions. |+| 9 | WAKE | input | Local wake-up input detecting valid rising or falling edge transitions at Vth(WAKE) threshold with minimum 5µs pulse duration. |+| 10 | VBAT | power_in | Battery power supply input with recommended operating range of 4.5V to 40V and undervoltage detection threshold of 3V to 4.3V. |+| 11 | SPLIT | output | Bus common-mode stabilization output providing reference bias at approximately VCC/2 in normal and silent modes for CAN differential signal biasing. |+| 12 | CANL | bidirectional | CAN bus low-side input/output with ±58V maximum voltage rating and ±30V common-mode input range in normal modes. |+| 13 | CANH | bidirectional | CAN bus high-side input/output with ±58V maximum voltage rating and ±30V common-mode input range in normal modes. |+| 14 | STBN | input | Standby control input; high level enables normal/silent mode operation, low level initiates low-power standby and sleep modes. |+| 15 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | SIT |+| Package | DFN4.5x3-14 |+| Category | Interface |+| Pins | 15 |++## CAD (KiCad official)++- Symbol: `SIT1043QTK`+- Footprint: `Package_DFN_QFN:DFN-14-1EP_3x4.5mm_P0.65mm_EP1.65x4.25mm`+- 3D model: DFN4.5x3-14 (KiCad packages3D, STEP)+- 3D model files: `sit1043qtk-etched.step` / `sit1043qtk-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `sit1043qtk.step` / `sit1043qtk.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [SIT datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8590903654876725248) (29 pp, sha256 `e0f1086f046ad773`, retrieved 2026-09-22, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-4-6` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/sit1043qtk-datasheet.pdf)
page.jsonadded+185
@@ -0,0 +1,185 @@+{+  "slug": "sit1043qtk",+  "version": "0.1.0",+  "type": "component",+  "description": "SIT CAN Transceivers, DFN4.5x3-14. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "interface",+    "sit1043qtk",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "sit1043qtk.kicad_sym",+    "sit1043qtk.kicad_mod",+    "sit1043qtk.glb",+    "sit1043qtk.step",+    "sit1043qtk.lbr",+    "docs/hero.png",+    "docs/sit1043qtk-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "SIT1043QTK",+    "manufacturer": "SIT",+    "package": "DFN4.5x3-14",+    "pin_count": 15,+    "category": "Interface",+    "subcategory": "CAN Transceivers",+    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8590903654876725248",+    "parts": {+      "symbol": "sit1043qtk.kicad_sym",+      "footprint": "sit1043qtk.kicad_mod",+      "model_3d": "sit1043qtk-etched.glb",+      "model_3d_plain": "sit1043qtk.glb",+      "model_3d_step": "sit1043qtk-etched.step",+      "model_3d_step_plain": "sit1043qtk.step",+      "lbr": "sit1043qtk.lbr"+    },+    "distributor_links": {+      "lcsc": "C7433975"+    },+    "pins": [+      {+        "number": "1",+        "name": "TXD",+        "type": "input",+        "description": "Transmitter data input accepting digital signals from 0V to VIO level to control CAN bus driver output state."+      },+      {+        "number": "2",+        "name": "GND",+        "type": "power_in",+        "description": "Ground reference providing return path for all power supplies and signal measurements."+      },+      {+        "number": "3",+        "name": "VCC",+        "type": "power_in",+        "description": "5V bus power supply input with recommended operating range of 4.5V to 5.5V and maximum rating to ±6V."+      },+      {+        "number": "4",+        "name": "RXD",+        "type": "output",+        "description": "Receiver data output providing digital signal at 0V or VIO level reflecting CAN bus dominant/recessive state."+      },+      {+        "number": "5",+        "name": "VIO",+        "type": "power_in",+        "description": "I/O port power supply input with recommended operating range of 2.8V to 5.5V and maximum rating to ±6V."+      },+      {+        "number": "6",+        "name": "EN",+        "type": "input",+        "description": "Enable control input; high level enables transmitter and high-speed receiver, low level enters silent/standby mode."+      },+      {+        "number": "7",+        "name": "INH",+        "type": "tri_state",+        "description": "Inhibit output for external regulator control; driven high in normal/standby/sleep-wait modes to enable external supplies, high-impedance state in sleep mode."+      },+      {+        "number": "8",+        "name": "ERRN",+        "type": "output",+        "description": "Error indicator output driven low to signal power-up event, wake-up request flag, or local/bus error conditions."+      },+      {+        "number": "9",+        "name": "WAKE",+        "type": "input",+        "description": "Local wake-up input detecting valid rising or falling edge transitions at Vth(WAKE) threshold with minimum 5µs pulse duration."+      },+      {+        "number": "10",+        "name": "VBAT",+        "type": "power_in",+        "description": "Battery power supply input with recommended operating range of 4.5V to 40V and undervoltage detection threshold of 3V to 4.3V."+      },+      {+        "number": "11",+        "name": "SPLIT",+        "type": "output",+        "description": "Bus common-mode stabilization output providing reference bias at approximately VCC/2 in normal and silent modes for CAN differential signal biasing."+      },+      {+        "number": "12",+        "name": "CANL",+        "type": "bidirectional",+        "description": "CAN bus low-side input/output with ±58V maximum voltage rating and ±30V common-mode input range in normal modes."+      },+      {+        "number": "13",+        "name": "CANH",+        "type": "bidirectional",+        "description": "CAN bus high-side input/output with ±58V maximum voltage rating and ±30V common-mode input range in normal modes."+      },+      {+        "number": "14",+        "name": "STBN",+        "type": "input",+        "description": "Standby control input; high level enables normal/silent mode operation, low level initiates low-power standby and sleep modes."+      },+      {+        "number": "15",+        "name": "EP",+        "type": "passive",+        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.2",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.2",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-4-6",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [+          "exposed pad 15 added from the footprint"+        ],+        "pages_sent": 29,+        "cost_usd": 0.2865,+        "at": "2026-09-22T14:06:19"+      },+      "datasheet": {+        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8590903654876725248",+        "pages": 29,+        "sha256": "e0f1086f046ad773",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 15,+        "described": 15,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file