component
SiLM5350RDDCM-DG
Public Made by Adomby adom
Sillumin Isolators - Gate Drivers, SOP-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownSiLM5350RDDCM-DG
Sillumin · Isolators - Gate Drivers · SOP-8
SiLM5350RDDCM-DG from Sillumin, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VCC1 | power_in | Input supply voltage for the input stage, operating range 3V to 18V per recommended operating conditions. |
| 2 | IN+ | input | Noninverting control input accepting -5V to 18V signals, pulled internally low if left open. |
| 3 | IN- | input | Inverting control input accepting -5V to 18V signals, pulled internally high if left open. |
| 4 | GND1 | power_in | Input ground reference for the isolated input stage. |
| 5 | VEE2 | power_in | Negative output supply voltage establishing the lower bound for output signal swings. |
| 6 | OUTL | tri_state | Gate driver pulldown output capable of sinking 10A peak current or tri-stating to high impedance based on input logic state. |
| 7 | OUTH | tri_state | Gate driver pullup output capable of sourcing 10A peak current or tri-stating to high impedance based on input logic state. |
| 8 | VCC2 | power_in | Positive output supply voltage, operating range 13.5V to 30V for the 12.5V UVLO variant per recommended operating conditions. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Sillumin |
| Package | SOP-8 |
| Category | Power Management (PMIC) |
| Pins | 8 |
CAD (KiCad official)
- Symbol:
SiLM5350RDDCM-DG - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
silm5350rddcm-dg-etched.step/silm5350rddcm-dg-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);silm5350rddcm-dg.step/silm5350rddcm-dg.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Sillumin datasheet (24 pp, sha256
c70745f1c5da93fd, retrieved 2026-09-21, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-4-6(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).