component
SI8719BC-A-IS
Public Made by Adomby adom
Skyworks Solutions Inc. Others, SOIC-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownSI8719BC-A-IS
Skyworks Solutions Inc. · Others · SOIC-8
SI8719BC-A-IS from Skyworks Solutions Inc., in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NC | unconnected | No connect, not internally connected; connect to the ground plane to maximize CMTI performance. |
| 2 | ANODE | input | Anode of LED emulator; VO follows the signal applied to this input with respect to the CATHODE input. |
| 3 | CATHODE | input | Cathode of LED emulator; VO follows the signal applied to ANODE with respect to this input. |
| 4 | NC | unconnected | No connect, not internally connected; connect to the ground plane to maximize CMTI performance. |
| 5 | GND | power_in | Ground reference for VDD, typically connected to ground but may be tied to a negative or positive voltage. |
| 6 | VO | output | Output signal. |
| 7 | NC | unconnected | No connect, not internally connected; connect to the ground plane to maximize CMTI performance. |
| 8 | VDD | power_in | Output-side power supply input referenced to GND (5.5 V max). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Skyworks Solutions Inc. |
| Package | SOIC-8 |
| Category | Others |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VDD Supply Voltage (recommended) | VDD | 2.5 | 5.5 | V | 4 | ||
| Input Current | IF(ON) | 6 | 30 | mA | See Figure 1 | 4 | |
| Operating Temperature (Ambient) | TA | -40 | 125 | °C | 4 | ||
| Supply Voltage | VDD | 2.5 | 5.5 | V | (VDD-GND) | 4 | |
| Input Current Threshold | IF(TH) | 3.6 | mA | 4 | |||
| Input Forward Voltage (OFF) | VF(OFF) | 1 | V | Measured at ANODE with respect to CATHODE. | 4 | ||
| Input Forward Voltage (ON) | VF(ON) | 1.4 | 2.8 | V | Measured at ANODE with respect to CATHODE. | 4 | |
| Logic Low Output Voltage | VOL | 0.2 | 0.4 | V | IOL = 4 mA | 4 | |
| Enable Low Max | VEL | 0.4 | V | 4 | |||
| Enable Low Current Draw | IEL | -30 | 0 | µA | VDD = 5 V, VEL = 0 V | 4 | |
| UVLO Threshold + | VDDUV+ | 2.2 | 2.35 | V | VDD rising | 4 | |
| UVLO Threshold, | VDDUV- | 2 | 2.25 | V | VDD falling | 4 | |
| UVLO lockout hysteresis | VDDHYS | 50 | 100 | mV | 4 | ||
| Maximum Data Rate | FDATA | 15 | MBPS | VDD = 5 V, CL = 15 pF | 5 | ||
| Minimum Pulse Width | MPW | 66 | ns | 5 | |||
| Propagation Delay (Low-to-High) | tPLH | 5 | 50 | ns | CL = 15 pF | 5 | |
| Propagation Delay (High-to-Low) | tPHL | 5 | 50 | ns | CL = 15 pF | 5 | |
| Pulse Width Distortion | PWD | 25 | ns | / tPLH, tPHL / | 5 | ||
| Propagation Delay Skew | tPSK(p-p) | 25 | ns | 5 | |||
| Rise Time | tR | 2.5 | 4 | ns | CL = 15 pF | 5 | |
| Fall Time | tF | 2.5 | 4 | ns | CL = 15 pF | 5 | |
| Device Startup Time | tSTART | 40 | µs | 5 | |||
| Common Mode Transient Immunity | CMTI | 35 | 50 | kV/µs | Output = low or high, VCM = 1500 V, IF = 6 mA | 5 | |
| Storage Temperature | TSTG | -65 | 150 | °C | 13 | ||
| Operating Temperature | TA | -40 | 125 | °C | 13 | ||
| Junction Temperature | TJ | 140 | °C | 13 | |||
| Average Forward Input Current | IF(AVG) | 30 | mA | 13 | |||
| Peak Transient Input Current | IFTR | 1 | A | < 1 µs pulse width, 300 pps | 13 | ||
| Reverse Input Voltage | VR | 0.3 | V | 13 | |||
| Supply Voltage | VDD | -0.5 | 7 | V | 13 | ||
| Output Source or Sink Current | IO | 22 | mA | 13 | |||
| Input Power Dissipation | PI | 90 | mW | 13 | |||
| Output Power Dissipation | PO | 163 | mW | 13 | |||
| Total Power Dissipation | PT | 253 | mW | 13 | |||
| Lead Solder Temperature | 260 | °C | 10 s | 13 | |||
| Maximum Isolation Voltage SOIC-8 | 4500 | VRMS | 1 s | 13 | |||
| Supply Current | IDD | 1.5 | mA | Output high or low (VDD = 2.5 to 5.5 V) | 4 | ||
| Input Current Hysteresis | IHYS | 0.34 | mA | 4 | |||
| Input Capacitance | CI | 15 | pF | f = 100 kHz, VF = 0 V | 4 | ||
| Output Impedance | ZO | 50 | Ω | 4 | |||
| Enable High Current Draw | IEH | 0 | µA | VDD =VEH = 5 V | 4 | ||
| IC Junction-to-Air Thermal Resistance SOIC-8 | θJA | 110 | ºC/W | 11 |
CAD (KiCad official)
- Symbol:
SI8719BC-A-IS - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
si8719bc-a-is-etched.step/si8719bc-a-is-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);si8719bc-a-is.step/si8719bc-a-is.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Skyworks Solutions Inc. datasheet (36 pp, sha256
49c52a88bbf3010d, retrieved 2026-10-23, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).