main
Ray Publish 0.1.0 15a159a

SI8642ED-B-ISR

SILICON LABS · Digital Isolators · SOIC-16-300mil

SI8642ED-B-ISR from SILICON LABS, in a SOIC-16-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VDD1 power_in Side 1 power supply, which requires a 0.1 µF bypass capacitor to GND1 placed as close as possible to the package.
2 GND1 power_in Side 1 ground.
3 A1 input Side 1 digital input.
4 A2 input Side 1 digital input.
5 A3 bidirectional Side 1 digital input or output.
6 A4 bidirectional Side 1 digital input or output.
7 EN1 input Side 1 active high enable; the NC designation applies only to Si8640/45, so on the Si8642 this pin is an active high enable.
8 GND1 power_in Side 1 ground.
9 GND2 power_in Side 2 ground.
10 EN2/NC input Side 2 active high enable; the NC designation applies only to Si8645, so on the Si8642 this pin is an active high enable.
11 B4 bidirectional Side 2 digital input or output.
12 B3 bidirectional Side 2 digital input or output.
13 B2 output Side 2 digital output.
14 B1 output Side 2 digital output.
15 GND2 power_in Side 2 ground.
16 VDD2 power_in Side 2 power supply, which requires a 0.1 µF bypass capacitor to GND2 placed as close as possible to the package.

Key specifications

Parameter Value
Manufacturer SILICON LABS
Package SOIC-16-300mil
Category Interface ICs
Pins 16

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply Voltage VDD1, VDD2 2.375 5.5 V 11
Ambient Operating Temperature TA -40 25 125 °C 11
Junction Operating Temperature TJ 150 °C 11
Storage Temperature TSTG -65 150 °C 26
Operating Temperature TA -40 125 °C 26
Junction Temperature TJ 150 °C 26
Supply Voltage VDD1, VDD2 -0.5 7 V 26
Input Voltage VI -0.5 V 26
Output Voltage VO -0.5 V 26
Output Current Drive Channel IO 10 mA 26
Lead Solder Temperature (10 s) 260 °C 10 s 26
Maximum Isolation (Input to Output) (1 sec) 6500 VRMS WB SOIC-16 26
IC Junction-to-Air Thermal Resistance θJA 100 °C/W WB SOIC-16 25
VDD Undervoltage Threshold (rising) VDDUV+ 1.95 2.24 2.375 V VDD1, VDD2 rising 11
VDD Undervoltage Threshold (falling) VDDUV- 1.88 2.16 2.325 V VDD1, VDD2 falling 11
VDD Undervoltage Hysteresis VDDHYS 50 70 95 mV 11
Positive-Going Input Threshold VT+ 1.4 1.67 1.9 V All inputs rising 11
Negative-Going Input Threshold VT- 1 1.23 1.4 V All inputs falling 11
Input Hysteresis VHYS 0.38 0.44 0.5 V 11
High Level Input Voltage VIH 2 V 11
Low Level Input Voltage VIL 0.8 V 11
High Level Output Voltage VOH 4.8 V loh = -4 mA 11
Low Level Output Voltage VOL 0.2 0.4 V lol = 4 mA 11
Input Leakage Current IL -10 10 µA Si864xxA/B/C/D 11
DC Supply Current VDD1 (Si8642Bx, Ex) 1.8 2.9 mA VI = 0(Bx), 1(Ex) 12
DC Supply Current VDD2 (Si8642Bx, Ex) 1.8 2.9 mA VI = 0(Bx), 1(Ex) 12
DC Supply Current VDD1 (Si8642Bx, Ex) 4.4 6.6 mA VI = 1(Bx), 0(Ex) 12
DC Supply Current VDD2 (Si8642Bx, Ex) 4.4 6.6 mA VI = 1(Bx), 0(Ex) 12
1 Mbps Supply Current VDD1 (Si8642Bx, Ex) 3.3 4.6 mA All Inputs = 500 kHz Square Wave, CI = 15 pF on All Outputs 12
1 Mbps Supply Current VDD2 (Si8642Bx, Ex) 3.3 4.6 mA All Inputs = 500 kHz Square Wave, CI = 15 pF on All Outputs 12
10 Mbps Supply Current VDD1 (Si8642Bx, Ex) 3.9 5.4 mA All Inputs = 5 MHz Square Wave, CI = 15 pF on All Outputs 12
10 Mbps Supply Current VDD2 (Si8642Bx, Ex) 3.9 5.4 mA All Inputs = 5 MHz Square Wave, CI = 15 pF on All Outputs 12
100 Mbps Supply Current VDD1 (Si8642Bx, Ex) 11 14.3 mA All Inputs = 50 MHz Square Wave, CI = 15 pF on All Outputs 13
100 Mbps Supply Current VDD2 (Si8642Bx, Ex) 11 14.3 mA All Inputs = 50 MHz Square Wave, CI = 15 pF on All Outputs 13
Maximum Data Rate 0 150 Mbps 13
Minimum Pulse Width 5 ns 13
Propagation Delay tPHL, tPLH 5 8 13 ns See Figure 4.2 Propagation Delay Timing 13
Pulse Width Distortion PWD 0.2 4.5 ns See Figure 4.2 Propagation Delay Timing 13
Propagation Delay Skew tPSK(P-P) 2 4.5 ns 13
Channel-Channel Skew tPSK 0.4 2.5 ns 13
Output Rise Time tr 2.5 4 ns CL = 15 pF 13
Output Fall Time tf 2.5 4 ns CL = 15 pF 13
Common Mode Transient Immunity CMTI 35 kV/µs VI = VDD or 0 V, VCM = 1500 V; Si86xxxA/B/C/D 13
Enable to Data Valid ten1 6 11 ns See Figure 4.1 ENABLE Timing Diagram 13
Enable to Data Tri-State ten2 8 12 ns See Figure 4.1 ENABLE Timing Diagram 13
Input power loss to valid default output tSD 8 12 ns See Figure 3.1 Device Behavior during Normal Operation 14
Start-up Time tSU 15 40 µs 14

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
housing abs Package Outline (16-Pin Wide Body SOIC) silabs.com / Building a more connected world. Rev. 2.1 / 28 28

CAD (KiCad official)

  • Symbol: SI8642ED-B-ISR
  • Footprint: Package_SO:SOIC-16W_7.5x10.3mm_P1.27mm
  • 3D model: SOIC-16-300mil (KiCad packages3D, STEP)
  • 3D model files: si8642ed-b-isr-etched.step / si8642ed-b-isr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); si8642ed-b-isr.step / si8642ed-b-isr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: SILICON LABS datasheet (42 pp, sha256 5aeddf07deb386fb, retrieved 2026-11-12, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF