Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

SI8642ED-B-IS

SILICON LABS · Digital Isolators · SOIC-16-300mil

SI8642ED-B-IS from SILICON LABS, in a SOIC-16-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VDD1 power_in Side 1 power supply, operating in the powered state for 2.5 V < VDD < 5.5 V and requiring a 0.1 µF bypass capacitor to GND1.
2 GND1 power_in Side 1 ground reference for the isolator input side.
3 A1 input Side 1 digital input with Schmitt trigger input for high noise immunity.
4 A2 input Side 1 digital input with Schmitt trigger input for high noise immunity.
5 A3 bidirectional Side 1 digital input or output; output impedance is nominally 50 Ω ±40% when driving a channel.
6 A4 bidirectional Side 1 digital input or output; output impedance is nominally 50 Ω ±40% when driving a channel.
7 EN1 input Side 1 active high enable; when EN is low the output is driven to high impedance (Hi-Z).
8 GND1 power_in Side 1 ground reference for the isolator input side.
9 GND2 power_in Side 2 ground reference for the isolator output side.
10 EN2 input Side 2 active high enable; when EN is low the output is driven to high impedance (Hi-Z).
11 B4 bidirectional Side 2 digital input or output; output impedance is nominally 50 Ω ±40% when driving a channel.
12 B3 bidirectional Side 2 digital input or output; output impedance is nominally 50 Ω ±40% when driving a channel.
13 B2 output Side 2 digital output; the default output state when the input side is unpowered is set by the ordering option, which is high for this OPN.
14 B1 output Side 2 digital output; the default output state when the input side is unpowered is set by the ordering option, which is high for this OPN.
15 GND2 power_in Side 2 ground reference for the isolator output side.
16 VDD2 power_in Side 2 power supply, operating in the powered state for 2.5 V < VDD < 5.5 V and requiring a 0.1 µF bypass capacitor to GND2.

Key specifications

Parameter Value
Manufacturer SILICON LABS
Package SOIC-16-300mil
Category Interface ICs
Pins 16

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Ambient Operating Temperature TA -40 25 125 °C 12
Junction Operating Temperature TJ 150 °C 12
Supply Voltage VDD1 VDD1 2.375 5.5 V 12
Supply Voltage VDD2 VDD2 2.375 5.5 V 12
VDD Undervoltage Threshold (rising) VDDUV+ 1.95 2.24 2.375 V 5 V ±10%; VDD1, VDD2 rising 12
VDD Undervoltage Threshold (falling) VDDUV- 1.88 2.16 2.325 V 5 V ±10%; VDD1, VDD2 falling 12
VDD Undervoltage Hysteresis VDDHYS 50 70 95 mV 5 V ±10% 12
Positive-Going Input Threshold VT+ 1.4 1.67 1.9 V 5 V ±10%; all inputs rising 12
Negative-Going Input Threshold VT- 1 1.23 1.4 V 5 V ±10%; all inputs falling 12
Input Hysteresis VHYS 0.38 0.44 0.5 V 5 V ±10% 12
High Level Input Voltage VIH 2 V 5 V ±10% 12
Low Level Input Voltage VIL 0.8 V 5 V ±10% 12
High Level Output Voltage VOH 4.8 V 5 V ±10%; IOH = -4 mA 12
Low Level Output Voltage VOL 0.2 0.4 V 5 V ±10%; IOL = 4 mA 12
Input Leakage Current (Si864xxA/B/C/D) IL -10 10 µA 12
DC Supply Current VDD1 (VI = 1, Ex) 1.8 2.9 mA 5 V ±10%; all inputs 0 V or at supply; VI = 1(Ex) 13
DC Supply Current VDD2 (VI = 1, Ex) 1.8 2.9 mA 5 V ±10%; all inputs 0 V or at supply; VI = 1(Ex) 13
DC Supply Current VDD1 (VI = 0, Ex) 4.4 6.6 mA 5 V ±10%; all inputs 0 V or at supply; VI = 0(Ex) 13
DC Supply Current VDD2 (VI = 0, Ex) 4.4 6.6 mA 5 V ±10%; all inputs 0 V or at supply; VI = 0(Ex) 13
1 Mbps Supply Current VDD1 3.3 4.6 mA 5 V ±10%; all inputs 500 kHz square wave, CI = 15 pF 13
1 Mbps Supply Current VDD2 3.3 4.6 mA 5 V ±10%; all inputs 500 kHz square wave, CI = 15 pF 13
10 Mbps Supply Current VDD1 3.9 5.4 mA 5 V ±10%; all inputs 5 MHz square wave, CI = 15 pF 13
10 Mbps Supply Current VDD2 3.9 5.4 mA 5 V ±10%; all inputs 5 MHz square wave, CI = 15 pF 13
100 Mbps Supply Current VDD1 11 14.3 mA 5 V ±10%; all inputs 50 MHz square wave, CI = 15 pF 14
100 Mbps Supply Current VDD2 11 14.3 mA 5 V ±10%; all inputs 50 MHz square wave, CI = 15 pF 14
Maximum Data Rate 0 150 Mbps 14
Minimum Pulse Width 5 ns 14
Propagation Delay tPHL, tPLH 5 8 13 ns 5 V ±10%; see Figure 4.2 14
Pulse Width Distortion PWD 0.2 4.5 ns 5 V ±10%; /tPLH, tPHL/; see Figure 4.2 14
Propagation Delay Skew tPSK(P-P) 2 4.5 ns 5 V ±10% 14
Channel-Channel Skew tPSK 0.4 2.5 ns 5 V ±10% 14
Output Rise Time tr 2.5 4 ns 5 V ±10%; CL = 15 pF 14
Output Fall Time tf 2.5 4 ns 5 V ±10%; CL = 15 pF 14
Common Mode Transient Immunity (Si86xxxA/B/C/D) CMTI 35 60 kV/µs VI = VDD or 0 V; VCM = 1500 V 14
Enable to Data Valid ten1 6 11 ns 5 V ±10% 14
Enable to Data Tri-State ten2 8 12 ns 5 V ±10% 14
Input Power Loss to Valid Default Output tSD 8 12 ns 5 V ±10%; see Figure 3.1 15
Start-up Time tSU 15 40 µs 5 V ±10% 15
10 Mbps Supply Current VDD1 (3.3 V) 3.6 5 mA 3.3 V ±10%; all inputs 5 MHz square wave, CI = 15 pF 18
10 Mbps Supply Current VDD2 (3.3 V) 3.6 5 mA 3.3 V ±10%; all inputs 5 MHz square wave, CI = 15 pF 18
100 Mbps Supply Current VDD1 (3.3 V) 8.2 10.7 mA 3.3 V ±10%; all inputs 50 MHz square wave, CI = 15 pF 18
100 Mbps Supply Current VDD2 (3.3 V) 8.2 10.7 mA 3.3 V ±10%; all inputs 50 MHz square wave, CI = 15 pF 18
10 Mbps Supply Current VDD1 (2.5 V) 3.4 4.8 mA 2.5 V ±5%; all inputs 5 MHz square wave, CI = 15 pF 21
10 Mbps Supply Current VDD2 (2.5 V) 3.4 4.8 mA 2.5 V ±5%; all inputs 5 MHz square wave, CI = 15 pF 21
100 Mbps Supply Current VDD1 (2.5 V) 6.9 9 mA 2.5 V ±5%; all inputs 50 MHz square wave, CI = 15 pF 21
100 Mbps Supply Current VDD2 (2.5 V) 6.9 9 mA 2.5 V ±5%; all inputs 50 MHz square wave, CI = 15 pF 21
Propagation Delay (2.5 V) tPHL, tPLH 5 8 14 ns 2.5 V ±5%; see Figure 4.2 22
Pulse Width Distortion (2.5 V) PWD 0.2 5 ns 2.5 V ±5%; /tPLH, tPHL/ 22
Propagation Delay Skew (2.5 V) tPSK(P-P) 2 5 ns 2.5 V ±5% 22
Storage Temperature TSTG -65 150 °C 27
Operating Temperature TA -40 125 °C 27
Junction Temperature TJ 150 °C 27
Supply Voltage VDD1, VDD2 -0.5 7 V 27
Input Voltage VI -0.5 V max printed as VDD + 0.5 27
Output Voltage VO -0.5 V max printed as VDD + 0.5 27
Output Current Drive Channel IO 10 mA 27
Lead Solder Temperature 260 °C 10 s 27
Maximum Isolation (Input to Output), WB SOIC-16 6500 VRMS 1 sec 27
IC Junction-to-Air Thermal Resistance (WB SOIC-16) θJA 100 °C/W WB SOIC-16 26

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
housing abs Package Outline (16-Pin Wide Body SOIC) silabs.com / Building a more connected world. Rev. 2.15 / 29 29

CAD (KiCad official)

  • Symbol: SI8642ED-B-IS
  • Footprint: Package_SO:SOIC-16W_7.5x10.3mm_P1.27mm
  • 3D model: SOIC-16-300mil (KiCad packages3D, STEP)
  • 3D model files: si8642ed-b-is-etched.step / si8642ed-b-is-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); si8642ed-b-is.step / si8642ed-b-is.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: SILICON LABS datasheet (44 pp, sha256 2425141c8d33cf85, retrieved 2026-11-12, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF