Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

SI8641AB-B-IS

SILICON LABS · Digital Isolators · SOIC-16-300mil

SI8641AB-B-IS from SILICON LABS, in a SOIC-16-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VDD1 power_in Side 1 power supply.
2 GND1 power_in Side 1 ground.
3 A1 input Side 1 digital input.
4 A2 input Side 1 digital input.
5 A3 bidirectional Side 1 digital input or output.
6 A4 bidirectional Side 1 digital input or output.
7 EN1 input Side 1 active high enable; this pin is EN1 on the Si8641 (it is NC only on the Si8640).
8 GND1 power_in Side 1 ground.
9 GND2 power_in Side 2 ground.
10 EN2 input Side 2 active high enable.
11 B4 bidirectional Side 2 digital input or output.
12 B3 bidirectional Side 2 digital input or output.
13 B2 output Side 2 digital output.
14 B1 output Side 2 digital output.
15 GND2 power_in Side 2 ground.
16 VDD2 power_in Side 2 power supply.

Key specifications

Parameter Value
Manufacturer SILICON LABS
Package SOIC-16-300mil
Category Interface ICs
Pins 16

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Ambient Operating Temperature TA -40 25 125 ºC 9
Supply Voltage VDD1 2.5 5.5 V 9
Storage Temperature TSTG -65 150 ºC 29
Ambient Temperature Under Bias TA -40 125 ºC 29
Junction Temperature TJ 150 °C 29
Supply Voltage VDD1, VDD2 -0.5 7 V 29
Input Voltage VI -0.5 V 29
Output Voltage VO -0.5 V 29
Output Current Drive Channel IO 22 mA All Si86xxxA-x-xx devices 29
Latchup Immunity 100 V/ns Slew rate applied across GND1 and GND2 29
Lead Solder Temperature 260 ºC 10 s 29
Maximum Isolation (Input to Output), WB SOIC-16 6500 VRMS 1 sec 29
Case Temperature (safety limiting) TS 150 °C WB SOIC-16 27
Safety Input, Output, or Supply Current (safety limiting) IS 220 mA WB SOIC-16; θJA = 100 °C/W, VI = 5.5 V, TJ = 150 °C, TA = 25 °C 27
Device Power Dissipation (safety limiting) PD 415 mW WB SOIC-16; VDD1 = VDD2 = 5.5 V, TJ = 150 ºC, CL = 15 pF 27
IC Junction-to-Air Thermal Resistance θJA 100 ºC/W WB SOIC-16 27
VDD Undervoltage Threshold (rising) VDDUV+ 1.95 2.24 2.375 V VDD1, VDD2 rising 9
VDD Undervoltage Threshold (falling) VDDUV- 1.88 2.16 2.325 V VDD1, VDD2 falling 9
VDD Undervoltage Hysteresis VDDHYS 50 70 95 mV 9
Positive-Going Input Threshold VT+ 1.4 1.67 1.9 V All inputs rising 9
Negative-Going Input Threshold VT- 1 1.23 1.4 V All inputs falling 9
Input Hysteresis VHYS 0.38 0.44 0.5 V 9
High Level Input Voltage VIH 2 V 9
Low Level Input Voltage VIL 0.8 V 9
Low Level Output Voltage VOL 0.2 0.4 V lol = 4 mA 9
Input Leakage Current IL -10 10 µA 9
DC Supply Current, VDD1 (Si8641Ax) VDD1 1.4 2.2 mA All inputs 0 V or at supply; VI = 0(Ax) 10
DC Supply Current, VDD2 (Si8641Ax) VDD2 2.3 3.7 mA All inputs 0 V or at supply; VI = 0(Ax) 10
DC Supply Current, VDD1 (Si8641Ax) VDD1 5.2 7.8 mA All inputs 0 V or at supply; VI = 1(Ax) 10
DC Supply Current, VDD2 (Si8641Ax) VDD2 3.6 5.4 mA All inputs 0 V or at supply; VI = 1(Ax) 10
1 Mbps Supply Current, VDD1 (Si8641Ax) VDD1 3.4 4.8 mA All inputs = 500 kHz square wave, CI = 15 pF on all outputs 12
1 Mbps Supply Current, VDD2 (Si8641Ax) VDD2 3.3 4.6 mA All inputs = 500 kHz square wave, CI = 15 pF on all outputs 12
Maximum Data Rate 0 1 Mbps 13
Minimum Pulse Width 250 ns 13
Propagation Delay tPHL, tPLH 35 ns See Figure 4.2 13
Pulse Width Distortion PWD 25 ns /tPLH, tPHL/; See Figure 4.2 13
Propagation Delay Skew tPSK(P-P) 40 ns 13
Channel-Channel Skew tPSK 35 ns 13
Output Rise Time tr 2.5 4 ns CL = 15 pF 13
Output Fall Time tf 2.5 4 ns CL = 15 pF 13
Common Mode Transient Immunity CMTI 35 50 kV/µs VI = VDD or 0 V; VCM = 1500 V 13
Enable to Data Valid ten1 6 11 ns See Figure 4.1 13
Enable to Data Tri-State ten2 8 12 ns See Figure 4.1 13
Start-up Time tSU 15 40 µs 14

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
housing PC 4. Recommended card reflow profile is per the JEDEC/IPC J-STD-020 specification for Small Body Components. 38

CAD (KiCad official)

  • Symbol: SI8641AB-B-IS
  • Footprint: Package_SO:SOIC-16W_7.5x10.3mm_P1.27mm
  • 3D model: SOIC-16-300mil (KiCad packages3D, STEP)
  • 3D model files: si8641ab-b-is-etched.step / si8641ab-b-is-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); si8641ab-b-is.step / si8641ab-b-is.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: SILICON LABS datasheet (47 pp, sha256 918e2e1a50310d63, retrieved 2026-11-12, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF