main
History Download
Ray Publish 0.1.0 4e426ac

SI8631AB-B-IS

Skyworks Solutions · Digital Isolators · SOIC-16

SI8631AB-B-IS from Skyworks Solutions, in a SOIC-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VDD1 power_in Side 1 power supply, operating range 2.5 V to 5.5 V, with a 0.1 µF bypass capacitor required between VDD1 and GND1.
2 GND1 power_in Side 1 ground; the pin table flags pin 2 with a footnote stating that for narrow-body devices it must be externally connected to ground.
3 A1 input Side 1 digital input.
4 A2 input Side 1 digital input.
5 A3 bidirectional Side 1 digital I/O; on the Si8631 it is an output that follows its input when EN1 is high and is high-impedance when EN1 is low.
6 NC unconnected No connect; not internally connected and can be left floating, tied to VDD, or tied to GND.
7 EN1 input Side 1 active-high enable (NC on Si8630, used on Si8631); internally pulled up to local VDD by a 2 µA current source and should be tied to a logic level in noisy environments.
8 GND1 power_in Side 1 ground.
9 GND2 power_in Side 2 ground.
10 EN2 input Side 2 active-high enable, internally pulled up to local VDD by a 2 µA current source; when low, outputs B1 and B2 are disabled and high-impedance.
11 NC unconnected No connect; not internally connected and can be left floating, tied to VDD, or tied to GND.
12 B3 bidirectional Side 2 digital input or output as listed in the pin table for Si863x.
13 B2 output Side 2 digital output; enabled and following the input state when EN2 is high, high-impedance when EN2 is low on the Si8631.
14 B1 output Side 2 digital output; enabled and following the input state when EN2 is high, high-impedance when EN2 is low on the Si8631.
15 GND2 power_in Side 2 ground; the pin table flags pin 15 with the same narrow-body external-connection footnote as pin 2.
16 VDD2 power_in Side 2 power supply, operating range 2.5 V to 5.5 V, with a 0.1 µF bypass capacitor required between VDD2 and GND2.

Key specifications

Parameter Value
Manufacturer Skyworks Solutions
Package SOIC-16
Category Signal Isolation Devices
Pins 16

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply Voltage VDD1 VDD1 2.5 5.5 V 9
Supply Voltage VDD2 VDD2 2.5 5.5 V 9
Ambient Operating Temperature TA -40 25 125 ºC 9
Storage Temperature TSTG -65 150 ºC 29
Ambient Temperature Under Bias TA -40 125 ºC 29
Junction Temperature TJ 150 °C 29
Supply Voltage VDD1, VDD2 -0.5 7 V 29
Input Voltage VI -0.5 V max printed as VDD + 0.5 V 29
Output Voltage VO -0.5 V max printed as VDD + 0.5 V 29
Output Current Drive Channel IO 10 mA All devices unless otherwise stated 29
Lead Solder Temperature (10 s) 260 ºC 10 s 29
Maximum Isolation (Input to Output), NB SOIC-16 4500 VRMS 1 sec, NB SOIC-16 29
Maximum Isolation (Input to Output), WB SOIC-16 6500 VRMS 1 sec, WB SOIC-16 29
Latchup Immunity 100 V/ns 29
Junction-to-Air Thermal Resistance, NB SOIC-16 θJA 105 ºC/W NB SOIC-16 27
Junction-to-Air Thermal Resistance, WB SOIC-16 θJA 100 ºC/W WB SOIC-16 27
VDD Undervoltage Threshold, rising VDDUV+ 1.95 2.24 2.375 V VDD1, VDD2 rising 9
VDD Undervoltage Threshold, falling VDDUV- 1.88 2.16 2.325 V VDD1, VDD2 falling 9
VDD Undervoltage Hysteresis VDDHYS 50 70 95 mV 9
Positive-Going Input Threshold VT+ 1.4 1.67 1.9 V All inputs rising 9
Negative-Going Input Threshold VT- 1 1.23 1.4 V All inputs falling 9
Input Hysteresis VHYS 0.38 0.44 0.5 V 9
High Level Input Voltage VIH 2 V 9
Low Level Input Voltage VIL 0.8 V 9
High Level Output Voltage (5 V) VOH 4.8 V loh = -4 mA; VDD1, VDD2 = 5 V±10%; min printed as VDD1,VDD2, 0.4 9
High Level Output Voltage (3.3 V) VOH 3.1 V loh = -4 mA; VDD1, VDD2 = 3.3 V±10%; min printed as VDD1, VDD2, 0.4 15
High Level Output Voltage (2.5 V) VOH 2.3 V loh = -4 mA; VDD1, VDD2 = 2.5 V±5%; min printed as VDD1,VDD2, 0.4 20
Low Level Output Voltage VOL 0.2 0.4 V lol = 4 mA 9
Input Leakage Current IL -10 10 µA 9
DC Supply Current VDD1, VI = 0 IDD1 1.3 2.1 mA Si8631Ax, VDD1, VI = 0(Ax), VDD = 5 V±10% 10
DC Supply Current VDD2, VI = 0 IDD2 1.7 2.7 mA Si8631Ax, VDD2, VI = 0(Ax), VDD = 5 V±10% 10
DC Supply Current VDD1, VI = 1 IDD1 3.9 5.9 mA Si8631Ax, VDD1, VI = 1(Ax), VDD = 5 V±10% 10
DC Supply Current VDD2, VI = 1 IDD2 3 4.5 mA Si8631Ax, VDD2, VI = 1(Ax), VDD = 5 V±10% 10
1 Mbps Supply Current VDD1 IDD1 2.7 3.8 mA Si8631Ax, all inputs = 500 kHz square wave, CI = 15 pF on all outputs, VDD = 5 V±10% 12
1 Mbps Supply Current VDD2 IDD2 2.6 3.6 mA Si8631Ax, all inputs = 500 kHz square wave, CI = 15 pF on all outputs, VDD = 5 V±10% 12
Maximum Data Rate 0 1 Mbps 13
Minimum Pulse Width 250 ns 13
Propagation Delay tPHL, tPLH 35 ns See Figure 4.2 Propagation Delay Timing 13
Pulse Width Distortion /tPLH, tPHL/ PWD 25 ns See Figure 4.2 Propagation Delay Timing 13
Propagation Delay Skew tPSK(P-P) 40 ns 13
Channel-Channel Skew tPSK 35 ns 13
Output Rise Time tr 2.5 4 ns CL = 15 pF; See Figure 4.2 Propagation Delay Timing 13
Output Fall Time tf 2.5 4 ns CL = 15 pF; See Figure 4.2 Propagation Delay Timing 13
Common Mode Transient Immunity CMTI 35 50 kV/µs VI = VDD or 0 V; VCM = 1500 V 13
Enable to Data Valid ten1 6 11 ns See Figure 4.1 ENABLE Timing Diagram 13
Enable to Data Tri-State ten2 8 12 ns See Figure 4.1 ENABLE Timing Diagram 13
Start-up Time tSU 15 40 µs 14
Output Impedance ZO 50 Ω 9
Enable Input High Current IENH 2 µA VENx = VIH 9
Enable Input Low Current IENL 2 µA VENx = VIL 9
Peak eye diagram jitter tJIT(PK) 350 ps See Figure 2.2 Modulation Scheme 13
Capacitance (Input-Output) CIO 2 pF f = 1 MHz 26
Input Capacitance CI 4 pF Measured from input pin to ground 26

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
housing PC 4. Recommended card reflow profile is per the JEDEC/IPC J-STD-020 specification for Small Body Components. 38

CAD (KiCad official)

  • Symbol: SI8631AB-B-IS
  • Footprint: Package_SO:SOIC-16W_7.5x10.3mm_P1.27mm
  • 3D model: SOIC-16 (KiCad packages3D, STEP)
  • 3D model files: si8631ab-b-is-etched.step / si8631ab-b-is-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); si8631ab-b-is.step / si8631ab-b-is.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Skyworks Solutions datasheet (47 pp, sha256 00fa9de0a782df1c, retrieved 2026-11-13, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF