main
History Download
Ray Publish 0.1.0 3c2e907

SI8442AB-D-IS

Skyworks Solutions · Digital Isolators · SOIC-16

SI8442AB-D-IS from Skyworks Solutions, in a SOIC-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VDD1 power_in Side 1 power supply, operating from 2.70 V to 5.5 V.
2 GND1 power_in Side 1 ground.
3 A1 input Side 1 digital input.
4 A2 input Side 1 digital input.
5 A3 bidirectional Side 1 digital input or output; on the Si8442, output A3 is enabled and follows the input state when EN1 is high, and is disabled to logic low or high-impedance when EN1 is low.
6 A4 bidirectional Side 1 digital input or output; on the Si8442, output A4 is enabled and follows the input state when EN1 is high, and is disabled to logic low or high-impedance when EN1 is low.
7 EN1 input Side 1 active high enable, internally pulled up to local VDD by a 3 µA current source and may be left floating or tied to a logic level.
8 GND1 power_in Side 1 ground.
9 GND2 power_in Side 2 ground.
10 EN2 input Side 2 active high enable, internally pulled up to local VDD by a 3 µA current source; on the Si8442 it enables outputs B1 and B2.
11 B4 bidirectional Side 2 digital input or output.
12 B3 bidirectional Side 2 digital input or output.
13 B2 output Side 2 digital output, enabled and following the input state when EN2 is high on the Si8442.
14 B1 output Side 2 digital output, enabled and following the input state when EN2 is high on the Si8442.
15 GND2 power_in Side 2 ground.
16 VDD2 power_in Side 2 power supply, operating from 2.70 V to 5.5 V.

Key specifications

Parameter Value
Manufacturer Skyworks Solutions
Package SOIC-16
Category Signal Isolation Devices
Pins 16

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Ambient Operating Temperature TA -40 25 125 ºC 150 Mbps, 15 pF, 5 V 3
Supply Voltage VDD1 VDD1 2.7 5.5 V 3
Supply Voltage VDD2 VDD2 2.7 5.5 V 3
Storage Temperature TSTG -65 150 °C 3
Ambient Temperature Under Bias TA -40 125 °C 3
Supply Voltage (Revision D) VDD1, VDD2 -0.5 6 V Revision D 3
Input Voltage VI -0.5 V max printed as VDD + 0.5 3
Output Voltage VO -0.5 V max printed as VDD + 0.5 3
Output Current Drive Channel IO 10 mA 3
Lead Solder Temperature 260 °C 10 s 3
Maximum Isolation Voltage 3600 VRMS 1 s 3
High Level Input Voltage VIH 2 V VDD1 = VDD2 = 5 V ±10%, TA = -40 to 125 °C 4
Low Level Input Voltage VIL 0.8 V VDD1 = VDD2 = 5 V ±10%, TA = -40 to 125 °C 4
High Level Output Voltage VOH 4.8 V Ioh = -4 mA; min printed as VDD1,VDD2, 0.4; 5 V 4
Low Level Output Voltage VOL 0.2 0.4 V Iol = 4 mA; 5 V 4
Input Leakage Current IL -10 10 µA 4
Output Impedance ZO 85 Ω nominal, ±40% per note 1 4
Enable Input High Current IENH 2 µA VENx = VIH 4
Enable Input Low Current IENL 2 µA VENx = VIL 4
DC Supply Current Si8442Ax VDD1, inputs 0 VDD1 2.3 3.5 mA All inputs 0 DC 4
DC Supply Current Si8442Ax VDD2, inputs 0 VDD2 2.3 3.5 mA All inputs 0 DC 4
DC Supply Current Si8442Ax VDD1, inputs 1 VDD1 4.5 6.8 mA All inputs 1 DC 4
DC Supply Current Si8442Ax VDD2, inputs 1 VDD2 4.5 6.8 mA All inputs 1 DC 4
1 Mbps Supply Current Si8442Ax VDD1 VDD1 3.6 5.4 mA All inputs = 500 kHz square wave, CI = 15 pF on all outputs 4
1 Mbps Supply Current Si8442Ax VDD2 VDD2 3.6 5.4 mA All inputs = 500 kHz square wave, CI = 15 pF on all outputs 4
Maximum Data Rate Si844xAx 0 1 Mbps 5
Minimum Pulse Width Si844xAx 250 ns 5
Propagation Delay Si844xAx tPHL, tPLH 35 ns See Figure 2 5
Pulse Width Distortion Si844xAx PWD 25 ns See Figure 2 5
Propagation Delay Skew Si844xAx tPSK(P-P) 40 ns 5
Channel-Channel Skew Si844xAx tPSK 35 ns 5
Output Rise Time (5 V) tr 3.8 5 ns CL = 15 pF, See Figure 2 6
Output Fall Time (5 V) tf 2.8 3.7 ns CL = 15 pF, See Figure 2 6
Common Mode Transient Immunity CMTI 25 kV/µs VI = VDD or 0 V 6
Enable to Data Valid ten1 5 8 ns See Figure 1 6
Enable to Data Tri-State ten2 7 9.2 ns See Figure 1 6
Start-up Time tSU 15 40 µs 6
High Level Output Voltage (3.3 V) VOH 3.1 V Ioh = -4 mA; min printed as VDD1,VDD2, 0.4; VDD = 3.3 V ±10% 8
Output Rise Time (3.3 V) tr 4.3 6.1 ns CL = 15 pF, See Figure 2 10
Output Fall Time (3.3 V) tf 3 4.3 ns CL = 15 pF, See Figure 2 10
High Level Output Voltage (2.70 V) VOH 2.3 V Ioh = -4 mA; min printed as VDD1,VDD2, 0.4; VDD = 2.70 V 11
Output Rise Time (2.70 V) tr 4.8 6.5 ns CL = 15 pF, See Figure 2 13
Output Fall Time (2.70 V) tf 3.2 4.6 ns CL = 15 pF, See Figure 2 13
Junction-to-Air Thermal Resistance (WB SOIC-16) θJA 100 ºC/W WB SOIC-16 16
Junction-to-Air Thermal Resistance (NB SOIC-16) θJA 105 ºC/W NB SOIC-16 16

CAD (KiCad official)

  • Symbol: SI8442AB-D-IS
  • Footprint: Package_SO:SOIC-16W_7.5x10.3mm_P1.27mm
  • 3D model: SOIC-16 (KiCad packages3D, STEP)
  • 3D model files: si8442ab-d-is-etched.step / si8442ab-d-is-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); si8442ab-d-is.step / si8442ab-d-is.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Skyworks Solutions datasheet (36 pp, sha256 b2562992805393be, retrieved 2026-11-13, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF