main
Ray Publish 0.1.0 2a2cec9

SI8440AB-D-ISR

Skyworks Solutions · Digital Isolators · SOIC-16

SI8440AB-D-ISR from Skyworks Solutions, in a SOIC-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VDD1 power_in Side 1 power supply, operating range 2.70-5.5 V per Table 1 (absolute maximum -0.5 to 6.0 V for Revision D).
2 GND1 power_in Side 1 ground; on narrow-body devices this pin must be externally connected to ground.
3 A1 input Side 1 digital input.
4 A2 input Side 1 digital input.
5 A3 bidirectional Side 1 digital input or output.
6 A4 bidirectional Side 1 digital input or output.
7 NC unconnected No connect on Si8440 (not internally connected); it can be left floating, tied to VDD, or tied to GND.
8 GND1 power_in Side 1 ground; on narrow-body devices this pin must be externally connected to ground.
9 GND2 power_in Side 2 ground; on narrow-body devices this pin must also be connected to external ground.
10 EN2 input Side 2 active high enable on Si8440; internally pulled up to local VDD by a 3 µA source, and should be tied to a logic level if unused in noisy environments.
11 B4 bidirectional Side 2 digital input or output.
12 B3 bidirectional Side 2 digital input or output.
13 B2 output Side 2 digital output.
14 B1 output Side 2 digital output.
15 GND2 power_in Side 2 ground; on narrow-body devices this pin must also be connected to external ground.
16 VDD2 power_in Side 2 power supply, operating range 2.70-5.5 V per Table 1 (absolute maximum -0.5 to 6.0 V for Revision D).

Key specifications

Parameter Value
Manufacturer Skyworks Solutions
Package SOIC-16
Category Signal Isolation Devices
Pins 16

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Ambient Operating Temperature TA -40 25 125 ºC 150 Mbps, 15 pF, 5 V 3
Supply Voltage (VDD1) VDD1 2.7 5.5 V 3
Supply Voltage (VDD2) VDD2 2.7 5.5 V 3
Storage Temperature TSTG -65 150 °C 3
Ambient Temperature Under Bias TA -40 125 °C 3
Supply Voltage (Revision D) VDD1, VDD2 -0.5 6 V Revision D 3
Input Voltage VI -0.5 V 3
Output Voltage VO -0.5 V 3
Output Current Drive Channel IO 10 mA 3
Lead Solder Temperature 260 °C 10 s 3
Maximum Isolation Voltage 3600 VRMS 1 s 3
Maximum Data Rate (Si844xAx) 0 1 Mbps 5
Minimum Pulse Width (Si844xAx) 250 ns 5
Propagation Delay (Si844xAx) tPHL, tPLH 35 ns See Figure 2 5
Pulse Width Distortion /tPLH - tPHL/ (Si844xAx) PWD 25 ns See Figure 2 5
Propagation Delay Skew (Si844xAx) tPSK(P-P) 40 ns 5
Channel-Channel Skew (Si844xAx) tPSK 35 ns 5
High Level Input Voltage VIH 2 V 4
Low Level Input Voltage VIL 0.8 V 4
Low Level Output Voltage VOL 0.2 0.4 V lol = 4 mA 4
Input Leakage Current IL -10 10 µA 4
DC Supply Current VDD1 (Si8440Ax, Bx) VDD1 1.5 2.3 mA All inputs 0 DC 4
DC Supply Current VDD2 (Si8440Ax, Bx) VDD2 2.5 3.8 mA All inputs 0 DC 4
DC Supply Current VDD1 (Si8440Ax, Bx) VDD1 5.7 8.6 mA All inputs 1 DC 4
DC Supply Current VDD2 (Si8440Ax, Bx) VDD2 2.6 3.9 mA All inputs 1 DC 4
1 Mbps Supply Current VDD1 (Si8440Ax, Bx) VDD1 3.6 5.4 mA All inputs = 500 kHz square wave, CI = 15 pF on all outputs 4
1 Mbps Supply Current VDD2 (Si8440Ax, Bx) VDD2 3 3.9 mA All inputs = 500 kHz square wave, CI = 15 pF on all outputs 4
Enable to Data Valid ten1 5 8 ns See Figure 1 6
Enable to Data Tri-State ten2 7 9.2 ns See Figure 1 6
Start-up Time tSU 15 40 µs 6
Output Rise Time (5 V) tr 3.8 5 ns VDD1 = VDD2 = 5 V ±10%; CL = 15 pF; See Figure 2 6
Output Fall Time (5 V) tf 2.8 3.7 ns VDD1 = VDD2 = 5 V ±10%; CL = 15 pF; See Figure 2 6
Output Rise Time (3.3 V) tr 4.3 6.1 ns VDD1 = VDD2 = 3.3 V ±10%; CL = 15 pF; See Figure 2 10
Output Fall Time (3.3 V) tf 3 4.3 ns VDD1 = VDD2 = 3.3 V ±10%; CL = 15 pF; See Figure 2 10
Output Rise Time (2.70 V) tr 4.8 6.5 ns VDD1 = VDD2 = 2.70 V; CL = 15 pF; See Figure 2 13
Output Fall Time (2.70 V) tf 3.2 4.6 ns VDD1 = VDD2 = 2.70 V; CL = 15 pF; See Figure 2 13
IC Junction-to-Air Thermal Resistance (WB SOIC-16) JA 100 ºC/W 16
IC Junction-to-Air Thermal Resistance (NB SOIC-16) JA 105 ºC/W 16

CAD (KiCad official)

  • Symbol: SI8440AB-D-ISR
  • Footprint: Package_SO:SOIC-16W_7.5x10.3mm_P1.27mm
  • 3D model: SOIC-16 (KiCad packages3D, STEP)
  • 3D model files: si8440ab-d-isr-etched.step / si8440ab-d-isr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); si8440ab-d-isr.step / si8440ab-d-isr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Skyworks Solutions datasheet (36 pp, sha256 b2562992805393be, retrieved 2026-11-12, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF