Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

SI8238AD-D-IS

SILICON LABS · Gate Drive ICs · SOIC-16-300mil

SI8238AD-D-IS from SILICON LABS, in a SOIC-16-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VIA input Non-inverting logic input terminal for Driver A.
2 VIB input Non-inverting logic input terminal for Driver B.
3 VDDI power_in Input-side power supply terminal; connect to a source of 2.7 to 5.5 V for the Si8238.
4 GNDI power_in Input-side ground terminal.
5 DISABLE input When high, unconditionally drives outputs VOA and VOB LOW; it is strongly recommended to connect this input to external logic level to avoid erroneous operation from capacitive noise coupling.
6 NC unconnected No connection.
7 NC unconnected No connection.
8 VDDI power_in Input-side power supply terminal; connect to a source of 2.7 to 5.5 V for the Si8238.
9 GNDB power_in Ground terminal for Driver B.
10 VOB output Driver B output.
11 VDDB power_in Driver B power supply voltage terminal; connect to a source of 6.5 to 24 V.
12 NC unconnected No connection.
13 NC unconnected No connection.
14 GNDA power_in Ground terminal for Driver A.
15 VOA output Driver A output.
16 VDDA power_in Driver A power supply voltage terminal; connect to a source of 6.5 to 24 V.

Key specifications

Parameter Value
Manufacturer SILICON LABS
Package SOIC-16-300mil
Category Power Management ICs
Pins 16

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input-side Power Supply Voltage (Si8237/8) VDDI 2.7 5.5 V 25
Driver Supply Voltage VDDA, VDDB 6.5 24 V Voltage between VDDA and GNDA, and VDDB and GNDB 25
Input Supply Quiescent Current (Si8230/2/3/5/7/8) IDDI(Q) 2 3 mA 25
Output Supply Quiescent Current IDDA(Q), IDDB(Q) 3 mA Current per channel 25
Input Pin Leakage Current (IVIA, IVIB, IPWM) IVIA, IVIB, IPWM -10 10 µA dc 25
Input Pin Leakage Current (Si8237/8) -1000 1000 µA dc 25
Logic High Input Threshold VIH 2 V 25
Logic Low Input Threshold VIL 0.8 V 25
Input Hysteresis (Si8230/1/2/3/4/5/7/8) VIHYST 400 450 mV 25
Logic Low Output Voltage VOAL, VOBL 0.04 V IOA, IOB = 1 mA 25
VDDI Undervoltage Threshold (rising, Si8237/8) VDDIUV+ 2.15 2.3 2.5 V VDDI rising (Si8237/8) 26
VDDI Undervoltage Threshold (falling, Si8237/8) VDDIUV- 2.1 2.22 2.4 V VDDI falling (Si8237/8) 26
VDDA, VDDB Undervoltage Threshold (rising, 5 V threshold) VDDAUV+, VDDBUV+ 5.2 5.8 6.3 V VDDA, VDDB rising, 5 V Threshold 26
VDDA, VDDB Undervoltage Threshold (falling, 5 V threshold) VDDAUV-, VDDBUV- 4.9 5.52 6 V VDDA, VDDB falling, 5 V Threshold 26
Propagation Delay tPHL, tPLH 30 45 ns CL = 200 pF 26
Pulse Width Distortion PWD 5.6 ns 26
Storage Temperature TSTG -65 150 °C 33
Ambient Temperature under Bias TA -40 125 °C 33
Junction Temperature TJ 150 °C 33
Input-side Supply Voltage VDDI -0.6 6 V 33
Driver-side Supply Voltage VDDA, VDDB -0.6 30 V 33
Voltage on any Pin with respect to Ground VIO -0.5 V 33
Output voltage to GND (repeat spike) VOA to GNDA, VOB to GNDB -2 V repeat spike of -2 V for 200 ns, 200 kHz 33
Peak Output Current (4.0 Amp versions) IOPK 4 A tPW = 10 µs, duty cycle = 0.2% 33
Lead Solder Temperature 260 °C 10 s 33
Maximum Isolation (Input to Output), WB SOIC 6500 VRMS 1 s, WB SOIC 33
Maximum Isolation (Output to Output), WB SOIC 2500 VRMS 1 s, WB SOIC 33
VDE Safety Limiting Case Temperature TS 150 °C Case temperature 32
VDE Safety Input Current IS 50 mA θJA = 100 °C/W (WB SOIC-14/16), VDDI = 5.5 V, VDDA = VDDB = 24 V, TJ = 150 °C, TA = 25 °C 32
VDE Device Power Dissipation PD 1.2 W 32
IC Junction-to-Air Thermal Resistance (WB SOIC-14/16) θJA 100 °C/W WB SOIC-14/16 32

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
housing PC 4. Recommended card reflow profile is per the JEDEC/IPC J-STD-020 specification for Small Body Components. 46

CAD (KiCad official)

  • Symbol: SI8238AD-D-IS
  • Footprint: Package_SO:SOIC-16W_7.5x10.3mm_P1.27mm
  • 3D model: SOIC-16-300mil (KiCad packages3D, STEP)
  • 3D model files: si8238ad-d-is-etched.step / si8238ad-d-is-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); si8238ad-d-is.step / si8238ad-d-is.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: SILICON LABS datasheet (59 pp, sha256 aaea8fd9d66be6b2, retrieved 2026-11-12, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF