Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

SI8230BD-D-ISR

Skyworks Solutions · Gate Drivers · SOIC-16

SI8230BD-D-ISR from Skyworks Solutions, in a SOIC-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VIA input Non-inverting logic input terminal for Driver A.
2 VIB input Non-inverting logic input terminal for Driver B.
3 VDDI power_in Input-side power supply terminal; connect to a source of 4.5 to 5.5 V.
4 GNDI power_in Input-side ground terminal.
5 DISABLE input Device disable; when high it unconditionally drives outputs VOA and VOB LOW, and it is strongly recommended to connect this input to external logic level to avoid erroneous operation from capacitive noise coupling.
6 DT input Dead-time programming input; the resistor from DT to ground sets the dead time between VOA and VOB transitions, which defaults to 400 ps when connected to VDDI or left open.
7 NC unconnected No connection.
8 VDDI power_in Input-side power supply terminal; connect to a source of 4.5 to 5.5 V.
9 GNDB power_in Ground terminal for Driver B.
10 VOB output Driver B output (low-side driver).
11 VDDB power_in Driver B power supply voltage terminal; connect to a source of 6.5 to 24 V.
12 NC unconnected No connection.
13 NC unconnected No connection.
14 GNDA power_in Ground terminal for Driver A.
15 VOA output Driver A output (high-side driver).
16 VDDA power_in Driver A power supply voltage terminal; connect to a source of 6.5 to 24 V.

Key specifications

Parameter Value
Manufacturer Skyworks Solutions
Package SOIC-16
Category Motor Driver ICs
Pins 16

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input-side Power Supply Voltage VDDI 4.5 5.5 V Si8230/1/2/3/4/5 24
Driver Supply Voltage VDDA, VDDB 6.5 24 V Voltage between VDDA and GNDA, and VDDB and GNDB 24
Input Supply Quiescent Current IDDI(Q) 2 3 mA Si8230/2/3/5/7/8 24
Output Supply Quiescent Current IDDA(Q), IDDB(Q) 3 mA Current per channel 24
Input Pin Leakage Current IVIA, IVIB, IPWM -10 10 µA dc 24
Logic High Input Threshold VIH 2 V 24
Logic Low Input Threshold VIL 0.8 V 24
Input Hysteresis VIHYST 400 450 mV Si8230/1/2/3/4/5/7/8 24
Logic Low Output Voltage VOAL, VOBL 0.04 V IOA, IOB = 1 mA 24
VDDI Undervoltage Threshold (rising) VDDIUV+ 3.6 4 4.45 V VDDI rising (Si8230/1/2/3/4/5) 25
VDDI Undervoltage Threshold (falling) VDDIUV- 3.3 3.7 4.15 V VDDI falling (Si8230/1/2/3/4/5) 25
VDDA, VDDB Undervoltage Threshold (rising), 8 V threshold VDDAUV+, VDDBUV+ 7.5 8.6 9.4 V VDDA, VDDB rising; 8 V Threshold 25
VDDA, VDDB Undervoltage Threshold (falling), 8 V threshold VDDAUV-, VDDBUV- 7.2 8.1 8.7 V VDDA, VDDB falling; 8 V Threshold 25
Propagation Delay tPHL, tPLH 30 45 ns CL = 200 pF 25
Pulse Width Distortion /tPLH - tPHL/ 5.6 ns 25
Storage Temperature TSTG -65 150 °C 32
Ambient Temperature under Bias TA -40 125 °C 32
Junction Temperature TJ 150 °C 32
Input-side Supply Voltage VDDI -0.6 6 V 32
Driver-side Supply Voltage VDDA, VDDB -0.6 30 V 32
Voltage on any Pin with respect to Ground VIO -0.5 V 32
Output voltage to GND (repeat spike) VOA to GNDA, VOB to GNDB -2 V Repeat spike of -2 V for 200 ns, 200 kHz 32
Peak Output Current (0.5 A versions) IOPK 0.5 A tPW = 10 µs, duty cycle = 0.2% 32
Lead Solder Temperature 260 °C 10 s 32
Maximum Isolation (Input to Output), WB SOIC 6500 VRMS 1 s 32
Maximum Isolation (Output to Output), WB SOIC 2500 VRMS 1 s 32
IC Junction-to-Air Thermal Resistance θJA 100 °C/W WB SOIC-14/16 package 31

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
housing PC 4. Recommended card reflow profile is per the JEDEC/IPC J-STD-020 specification for Small Body Components. 45

CAD (KiCad official)

  • Symbol: SI8230BD-D-ISR
  • Footprint: Package_SO:SOIC-16_3.9x9.9mm_P1.27mm
  • 3D model: SOIC-16 (KiCad packages3D, STEP)
  • 3D model files: si8230bd-d-isr-etched.step / si8230bd-d-isr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); si8230bd-d-isr.step / si8230bd-d-isr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Skyworks Solutions datasheet (58 pp, sha256 33ac750e8466acf0, retrieved 2026-10-18, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF