main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers si7210-b-01-iv: viewers rendered from the public page · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray
si7210-b-01-iv-etched.glb si7210-b-01-iv: factory component page (tier=lcsc) · Ray
si7210-b-01-iv-etched.step si7210-b-01-iv: factory component page (tier=lcsc) · Ray
si7210-b-01-iv-hero.glb si7210-b-01-iv: hero GLB from the etched model (keeps the MPN mark) · Ray
si7210-b-01-iv-hero.overlay.json si7210-b-01-iv: hero GLB from the etched model (keeps the MPN mark) · Ray
si7210-b-01-iv.glb Publish 0.1.0 · Ray
si7210-b-01-iv.kicad_mod Publish 0.1.0 · Ray
si7210-b-01-iv.kicad_sym Publish 0.1.0 · Ray
si7210-b-01-iv.lbr Publish 0.1.0 · Ray
si7210-b-01-iv.step Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier lcsc, 5 pins · Ray

SI7210-B-01-IV

SILICON LABS · Angle, Linear Position Sensors · SOT-23-5

SI7210-B-01-IV from SILICON LABS, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.

Pinout

Pin Name Type Function
1 SDA bidirectional I2C serial data line for the Si7210 bidirectional I2C interface, which supports fast mode operation up to 400 kHz with 7-bit addressing.
2 GND power_in Ground reference pin for the device.
3 SCL input I2C clock input for the Si7210 interface.
4 VDD power_in Power supply pin, specified for +1.7 V to +5.5 V.
5 ALERT output Digital output that goes high or low when the magnetic field crosses a threshold; for the Si7210-B-01 ordering option it is configured as open drain.

Key specifications

Parameter Value
Manufacturer SILICON LABS
Package SOT-23-5
Category Sensors
Pins 5

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Power Supply Voltage VDD 1.71 5.5 V 3
Operating Temperature TA -40 125 °C Temp Grade I 3
Input Voltage High VIH 0.7 x VDD SCL, SDA pins 3
Input Voltage Low VIL 0.3 x VDD SCL, SDA pins 3
Input Voltage Range VIN 0 V SCL, SDA with respect to ground 3
Input Leakage IIL 1 µA SDA, SCL 3
Output Voltage Low (general, SCL/SDA) VOL 0.4 V SCL, SDA IOL = 3 mA, VDD > 2 V 3
Output Voltage Low (general, SCL/SDA) VOL 0.2 V SCL, SDA IOL = 2 mA, VDD > 1.71 V 3
Output Voltage Low (general, SCL/SDA) VOL 0.6 V SCL, SDA IOL = 6 mA, VDD > 2 V 3
Output Voltage Low (output pin) VOL 0.4 V Output pin open drain or push pull, IOL = 3 mA, VDD > 2 V 4
Output Voltage Low (output pin) VOL 0.2 V Output pin open drain or push pull, IOL = 2 mA, VDD > 1.7 V 4
Output Voltage Low (output pin) VOL 0.6 V Output pin open drain or push pull, IOL = 6 mA, VDD > 2 V 4
Output Leakage (high) IOH 1 µA Output pin open drain 4
Idle Mode Current IDD 360 1000 µA Idle mode 3
Sleep Time TSLEEP 1 200 msec Factory configurable 4
Sleep Time Tolerance TSLEEP -20 20 % Factory configurable sleep time, ±20% 4
Idle Time (slTime = 0x01, slFast = 1) TIDLE 11.9 13.2 14.5 µs slTime = 0x01, slFast = 1 4
Idle Time (slTime = 0xFF, slFast = 0) TIDLE 185 206 227 msec slTime = 0xFF, slFast = 0 4
Offset (Digital Output Mode), full range BOFF -350 450 µT 20 mT scale, SOT23 package, full temperature and VDD range 6
Offset (Digital Output Mode), 0-70 °C BOFF -250 250 µT 20 mT scale, SOT23 package, 0 - 70°C and 1.71 V to 3.6 V 6
Gain Accuracy, 0-70 °C 5 % 0 - 70°C 6
Gain Accuracy, full temperature range 10 % Full temperature range 6
Gain Variation with Temperature (flat tempco) -0.05 0.05 %/°C Flat tempco, 0 - 70°C 6
Average Temperature Measurement Error (SOT23-5) 1 1.5 °C -10 to +85°C, after gain and offset correction 6
Ambient Temperature Under Bias -55 125 °C 7
Storage Temperature -65 150 °C 7
Voltage on I/O Pins -0.3 V 7
Voltage on VDD with Respect to Ground -0.3 6 V 7
ESD Tolerance HBM 2 kV HBM 7
ESD Tolerance CDM 500 V CDM 7
Default Operate Point (Bop) Bop -1.1 1.1 mT Si7210-B-01 default; printed ±1.1 mT (max) 22
Default Release Point (Brp) Brp -0.2 0.2 mT Si7210-B-01 default; printed ±0.2 mT (min) 22
Operate-Release Hysteresis /Bop - Brp/ /Bop - Brp/ 0.4 mT Si7210-B-01 default 22
Tamper Threshold 19.84 mT Si7210-B-01 factory tamper point 22
Current Consumption (sleep timer average) IDD 0.4 µA Sleep timer enabled average at VDD = 3.3 V and 200 msec sleep time 3
Sleep Mode Current, 25 °C IDD 50 nA Sleep mode, VDD = 3.3 V, T = 25 °C 3
Sleep Mode Current, 70 °C IDD 1000 nA Sleep mode, VDD = 3.3 V, T = 70 °C 3
Sleep Mode Current, 125 °C IDD 5000 nA Sleep mode, VDD = 5.5 V, T = 125 °C 3
Conversion Time, first measurement in burst TCONV 11 µs Conversion time for first measurement in a burst 3
Conversion Time, additional conversions in burst TCONV 8.8 µs Additional conversions in a burst 3
Wake Up Time TWAKE 1 msec Time from VDD > 1.7 V to first measurement 4
Digital Output Slew Rate TSLEW 5 %VDD/ns Digital output mode 4
RMS Noise 30 µT rms Temp = 25 °C, 20 mT range, VDD = 5 V, single conversion 6
Neodymium Magnet Temperature Compensation -0.12 %/°C Neodymium compensation 6
Ceramic Magnet Temperature Compensation -0.2 %/°C Ceramic compensation 6
Junction to Air Thermal Resistance (SOT23-5) θJA 212.8 °C/W JEDEC 4 layer board no airflow, SOT23-5 7
Junction to Board Thermal Resistance (SOT23-5) θJB 45 °C/W JEDEC 4 layer board no airflow, SOT23-5 7

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
housing PC 4. Recommended card reflow profile is per the JEDEC/IPC J-STD-020D specification for Small Body Components. 25

CAD (land: KiCad; 3D: generated from the datasheet)

  • Symbol: SI7210-B-01-IV
  • Footprint: Package_TO_SOT_SMD:SOT-23-5
  • 3D model: SOT-23-5, generated on the KiCad land (body 1.6 x 2.9 mm, terminals on the pads, 1.25 mm tall, datasheet A, max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: si7210-b-01-iv-etched.step / si7210-b-01-iv-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); si7210-b-01-iv.step / si7210-b-01-iv.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: SILICON LABS datasheet (33 pp, sha256 58287f55181b9092, retrieved 2026-11-13, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).

Datasheet PDF