main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers si5338a-b-gm: viewers · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md Publish 0.1.0 · Ray
si5338a-b-gm-etched.glb Publish 0.1.0 · Ray
si5338a-b-gm-etched.step si5338a-b-gm: factory component page (tier=mfr) · Ray
si5338a-b-gm-hero.glb si5338a-b-gm: hero GLB from the etched model (keeps the MPN mark) · Ray
si5338a-b-gm-hero.overlay.json Publish 0.1.0 · Ray
si5338a-b-gm.glb Publish 0.1.0 · Ray
si5338a-b-gm.kicad_mod Publish 0.1.0 · Ray
si5338a-b-gm.kicad_sym Publish 0.1.0 · Ray
si5338a-b-gm.lbr Publish 0.1.0 · Ray
si5338a-b-gm.step Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 25 pins · Ray

SI5338A-B-GM

Skyworks Solutions · Clock / Timing - Application Specific · QFN-24(4x4)

SI5338A-B-GM from Skyworks Solutions, in a QFN-24(4x4). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 IN1 input CLKIN: main differential clock input (with IN2) or XTAL input, must be ac-coupled; leave unconnected when not in use.
2 IN2 input CLKINB: complementary differential clock input or XTAL input, must be ac-coupled; connect to GND when not in use.
3 IN3 input CLKIN on the Si5338A/B/C: high-impedance dc-coupled single-ended clock input; connect to ground if not used.
4 IN4 input I2C_LSB on the Si5338A/B/C: LSB of the I2C address (0 = 70h, 1 = 71h).
5 IN5 input FDBK: differential feedback input for zero delay mode or secondary clock input, must be ac-coupled; leave unconnected when not in use.
6 IN6 input FDBKB: complementary differential feedback input or secondary clock input, must be ac-coupled; connect to GND when not in use.
7 VDD power_in Core supply voltage of 1.8, 2.5, or 3.3 V, with a 0.1 µF bypass capacitor very close to the pin.
8 INTR output Open-drain interrupt output needing a typical 1-4 kΩ pullup, which can go to a supply as high as 3.6 V.
9 CLK3B output Output clock B for channel 3, single-ended or the other half of a differential pair with CLK3A; leave floating if unused.
10 CLK3A output Output clock A for channel 3, single-ended or the other half of a differential pair with CLK3B; leave floating if unused.
11 VDDO3 power_in Output supply (3.3, 2.5, 1.8, or 1.5 V) for CLK3A,B with a 0.1 µF capacitor close to the pin; tie to VDD if CLK3 is unused.
12 SCL input I2C serial clock input, requires a 1-4 kΩ typical pullup and is 3.3 V tolerant regardless of other supply voltages.
13 CLK2B output Output clock B for channel 2, single-ended or the other half of a differential pair with CLK2A; leave floating if unused.
14 CLK2A output Output clock A for channel 2, single-ended or the other half of a differential pair with CLK2B; leave floating if unused.
15 VDDO2 power_in Output supply (3.3, 2.5, 1.8, or 1.5 V) for CLK2A,B with a 0.1 µF capacitor close to the pin; tie to VDD if CLK2 is unused.
16 VDDO1 power_in Output supply (3.3, 2.5, 1.8, or 1.5 V) for CLK1A,B with a 0.1 µF capacitor close to the pin; tie to VDD if CLK1 is unused.
17 CLK1B output Output clock B for channel 1, single-ended or the other half of a differential pair with CLK1A; leave floating if unused.
18 CLK1A output Output clock A for channel 1, single-ended or the other half of a differential pair with CLK1B; leave floating if unused.
19 SDA bidirectional I2C serial data, requires a 1-4 kΩ typical pullup and is 3.3 V tolerant regardless of other supply voltages.
20 VDDO0 power_in Output supply (3.3, 2.5, 1.8, or 1.5 V) for CLK0A,B with a 0.1 µF capacitor close to the pin; tie to VDD if CLK0 is unused.
21 CLK0B output Output clock B for channel 0, single-ended or the other half of a differential pair with CLK0A; leave floating if unused.
22 CLK0A output Output clock A for channel 0, single-ended or the other half of a differential pair with CLK0B; leave floating if unused.
23 RSVD_GND power_in Ground pin that must be connected to system ground with minimal ground path impedance.
24 VDD power_in Core supply voltage of 1.8, 2.5, or 3.3 V, with a 0.1 µF bypass capacitor very close to the pin.
25 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Skyworks Solutions
Package QFN-24(4x4)
Category RTC/Clock Chip
Pins 25

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Ambient Temperature TA -40 25 85 °C 4
Core Supply Voltage VDD 2.97 3.3 3.63 V VDD 3.3 V ±10% 4
Core Supply Voltage VDD 2.25 2.5 2.75 V VDD 2.5 V ±10% 4
Core Supply Voltage VDD 1.71 1.8 1.98 V VDD 1.8 V -5% to +10% 4
Output Buffer Supply Voltage VDDOn 1.4 3.63 V 4
DC Supply Voltage VDD -0.5 3.8 V 4
Storage Temperature Range TSTG -55 150 °C 4
Junction Temperature TJ 150 °C 4
Peak Soldering Reflow Temperature 260 °C JEDEC J-STD-020 4
Thermal Resistance Junction to Ambient JA 37 °C/W Still Air 5
Core Supply Current IDD 45 60 mA 100 MHz on all outputs, 25 MHz refclk 5
Output Buffer Supply Current LVPECL IDDOx 30 mA LVPECL, 710 MHz 5
Output Buffer Supply Current LVDS IDDOx 8 mA LVDS, 710 MHz 5
Output Buffer Supply Current HCSL IDDOx 20 mA HCSL, 250 MHz, 2 pF load 5
Output Buffer Supply Current SSTL IDDOx 19 mA SSTL, 350 MHz 5
Output Buffer Supply Current CMOS 50 MHz IDDOx 6 9 mA CMOS, 50 MHz, 15 pF load 5
Output Buffer Supply Current CMOS 200 MHz 3.3 V IDDOx 13 18 mA CMOS, 200 MHz, 3.3 V VDD0 5
Output Buffer Supply Current HSTL IDDOx 19 mA HSTL, 350 MHz 5
PLL Acquisition Time tACQ 25 ms 6
PLL Tracking Range fTRACK 5000 20000 ppm 6
MultiSynth Frequency Synthesis Resolution fRES 0 0 1 ppb Output frequency < Fvco/8 6
CLKIN Loss of Signal Detect Time tLOS 2.6 5 µs 6
PLL Loss of Lock Detect Time tLOL 5 10 ms 6
POR to Output Clock Valid tRDY 2 ms Pre-programmed Devices 6
Input-to-Output Propagation Delay tPROP 2.5 4 ns Buffer Mode (PLL Bypass) 6
POR to I2C Ready 15 ms 6
Programmable Initial Phase Offset POFFSET -45 45 ns 6
Phase Increment/Decrement Range PRANGE -45 45 ns 6
MultiSynth range for phase increment/decrement fPRANGE 5 MHz Maximum printed as Fvco/8 6
Frequency Increment/Decrement Step Size fSTEP 1 ppm R divider not used; maximum see Note 2 7
Spread Spectrum PP Frequency Deviation SSDEV 0.1 5.04 % MultiSynth Output < ~Fvco/8 7
Spread Spectrum Modulation Rate SSDEV 30 635 kHz MultiSynth Output < ~Fvco/8 7
Input Clock Frequency (AC coupled differential) fIN 5 710 MHz Pins IN1/2, IN5/6 8
Differential Voltage Swing VPP 0.4 2.4 VPP 710 MHz input 8
Rise/Fall Time (differential input) tR/tF 1 ns 20%-80% 8
Duty Cycle (differential input) DC 40 60 % DC < 1 ns tr/tf 8
Duty Cycle (PLL bypass) DC 45 55 % DC < 1 ns tr/tf (PLL bypass) 8
Input Clock Frequency (DC coupled CMOS) fIN 5 200 MHz CMOS, pins IN3/4 8
Input Voltage VI -0.1 3.73 V 8
Rise/Fall Time (single-ended input) tR/tF 4 ns 10%-90% 8
Rise/Fall Time (single-ended input) tR/tF 2.3 ns 20%-80% 8
Output Frequency LVPECL, LVDS, CML fOUT 0.16 350 MHz LVPECL, LVDS, CML 8
Output Frequency (Fvco/4) fOUT 367 473.33 MHz LVPECL, LVDS, CML 8
Output Frequency (Fvco/6) fOUT 550 710 MHz LVPECL, LVDS, CML 8
Output Frequency HCSL fOUT 0.16 250 MHz HCSL 8
LVPECL Peak-to-Peak Single-Ended Swing VSEPP 0.55 0.8 0.96 VPP LVPECL 9
LVDS Common Mode Voltage (2.5/3.3 V) VOC 1.125 1.2 1.275 V LVDS (2.5/3.3 V) 9
LVDS Peak-to-Peak Single-Ended Swing (2.5/3.3 V) VSEPP 0.25 0.35 0.45 VPP LVDS (2.5/3.3 V) 9
HCSL Common Mode Voltage VOC 0.35 0.375 0.4 V HCSL 9
HCSL Peak-to-Peak Single-Ended Swing VSEPP 0.575 0.725 0.85 VPP HCSL 9
CML Peak-to-Peak Single-Ended Swing VSEPP 0.67 0.86 1.07 VPP CML 9
Differential Output Rise/Fall Time tR/tF 450 ps 20%-80% 9
Differential Output Duty Cycle DC 45 55 % Not in PLL bypass mode 9
Output Frequency CMOS fOUT 0.16 200 MHz CMOS 9
Output Frequency SSTL, HSTL fOUT 0.16 350 MHz SSTL, HSTL 9
CMOS Output Rise/Fall Time tR/tF 0.45 0.85 ns 20%-80%, 2 pF load 9
CMOS Output Voltage Low VOL 0.3 V 4 mA load 10
Single-Ended Output Duty Cycle DC 45 55 % Not in PLL bypass mode 10
Input Voltage Low (IN3, IN4) VIL -0.1 0.3 V 0.3 x VDD 11
Input Voltage High (IN3, IN4) VIH 0.7 3.73 V 0.7 x VDD minimum 11

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
housing PC 4. Recommended card reflow profile is per the JEDEC/IPC J-STD-020 specification for Small Body 39

CAD (KiCad official)

  • Symbol: SI5338A-B-GM
  • Footprint: Package_DFN_QFN:QFN-24-1EP_4x4mm_P0.5mm_EP2.6x2.6mm
  • 3D model: QFN-24(4x4) (KiCad packages3D, STEP)
  • 3D model files: si5338a-b-gm-etched.step / si5338a-b-gm-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); si5338a-b-gm.step / si5338a-b-gm.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Skyworks Solutions datasheet (46 pp, sha256 d6857f2e224a5271, retrieved 2026-11-07, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF