3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownSI53306-B-GM
Skyworks Solutions · Clock Buffers, Drivers · QFN-16(3x3)
SI53306-B-GM from Skyworks Solutions, in a QFN-16(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD | power_in | Core voltage supply; bypass with 1.0 µF capacitor placed as close to the VDD pin as possible. |
| 2 | CLK | input | Input clock. |
| 3 | CLKb | input | Input clock (complement); when CLK is driven by a single-ended input, connect CLKb to VDD/2. |
| 4 | GND | power_in | Ground. |
| 5 | VDDO | power_in | Output voltage supply for all outputs (Q0 to Q3); bypass with 1.0 µF capacitor placed as close to the VDDO pin as possible. |
| 6 | Q3b | output | Output clock 3 (complement). |
| 7 | Q3 | output | Output clock 3. |
| 8 | SFOUT1 | input | Output signal format control pin 1; three-level input internally biased at VDD/2, can be left floating or tied to ground or VDD. |
| 9 | Q2b | output | Output clock 2 (complement). |
| 10 | Q2 | output | Output clock 2. |
| 11 | Q1b | output | Output clock 1 (complement). |
| 12 | Q1 | output | Output clock 1. |
| 13 | SFOUT0 | input | Output signal format control pin 0; three-level input internally biased at VDD/2, can be left floating or tied to ground or VDD. |
| 14 | Q0b | output | Output clock 0 (complement). |
| 15 | Q0 | output | Output clock 0. |
| 16 | OE | input | Output enable; high enables all outputs, low holds Q low and Qb high for differential formats (both low for LVCMOS), with an internal pull-up resistor. |
| 17 | GND PAD | power_in | Power supply ground and thermal relief exposed pad. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Skyworks Solutions |
| Package | QFN-16(3x3) |
| Category | RTC/Clock Chip |
| Pins | 17 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Ambient Operating Temperature | TA | -40 | 85 | °C | 20 | ||
| Supply Voltage Range (1.8 V) | VDD | 1.71 | 1.8 | 1.89 | V | LVDS, CML | 20 |
| Supply Voltage Range (2.5 V) | VDD | 2.38 | 2.5 | 2.63 | V | LVDS, CML, LVPECL, low power LVPECL, LVCMOS | 20 |
| Supply Voltage Range (3.3 V) | VDD | 2.97 | 3.3 | 3.63 | V | all formats incl. HCSL | 20 |
| Differential Input Common Mode Voltage | VCM | 0.05 | V | VDD = 2.5 V ± 5%, 3.3 V ± 10% | 20 | ||
| Differential Input Swing (peak-to-peak) | VIN | 0.2 | 2.2 | V | 20 | ||
| LVCMOS Input High Voltage | VIH | 0.7 | ×VDD | VDD = 2.5 V ± 5%, 3.3 V ± 10% | 20 | ||
| LVCMOS Input Low Voltage | VIL | 0.3 | ×VDD | VDD = 2.5 V ± 5%, 3.3 V ± 10% | 20 | ||
| Supply Current | IDD | 65 | 100 | mA | 21 | ||
| Input High Voltage | VIH | 0.8 | ×VDD | SFOUTx, DIVx, CLK_SEL, OEx Si53301/2/4/5/6/7/8 | 21 | ||
| Input Mid Voltage | VIM | 0.45 | 0.5 | 0.55 | ×VDD | SFOUTx, DIVx 3-level input pins | 21 |
| Input Low Voltage | VIL | 0.2 | ×VDD | SFOUTx, DIVx, CLK_SEL, OEx Si53301/2/4/5/6/7/8 | 21 | ||
| LVPECL Single-Ended Output Swing | VSE | 0.55 | 0.8 | 1.05 | V | 22 | |
| Low Power LVPECL Single-Ended Output Swing | VSE | 0.25 | 0.6 | 0.85 | V | RL = 100 Ω across Qn and Qn | 22 |
| CML Single-Ended Output Swing | VSE | 300 | 400 | 550 | mV | Terminated as shown in Figure 2.9 (CML termination) | 22 |
| LVDS Single-Ended Output Swing | VSE | 247 | 490 | mV | RL = 100 Ω across QN and QN, Si53301/2/4/5/6/7/8 | 23 | |
| LVDS Output Common Mode Voltage (VDDO = 2.5 V or 3.3V) | VCOM1 | 1.1 | 1.25 | 1.35 | V | VDDOX = 2.38 to 2.63 V, 2.97 to 3.63 V, RL = 100 Ω across QN and QN | 23 |
| LVDS Output Common Mode Voltage (VDDO = 1.8 V) | VCOM2 | 0.85 | 0.97 | 1.25 | V | VDDOX = 1.71 to 1.89 V, RL = 100 Ω across QN and QN, Si53301/2/4/5/6/7/8 | 23 |
| LVCMOS Output Voltage High | VOH | 0.75 | ×VDDOX | Si53301/2/4/5/6/7/8 | 23 | ||
| LVCMOS Output Voltage Low | VOL | 0.25 | ×VDDOX | Si53301/2/4/5/6/7/8 | 23 | ||
| HCSL Output Voltage High | VOH | 550 | 700 | 900 | mV | RL = 50 Ω to GND, Si53301/2/3/4/5/6/8 | 23 |
| HCSL Output Voltage Low | VOL | -150 | 0 | 150 | mV | RL = 50 Ω to GND | 23 |
| HCSL Single-Ended Output Swing | VSE | 550 | 700 | 850 | mV | RL = 50 Ω to GND | 23 |
| HCSL Crossing Voltage | VC | 250 | 350 | 550 | mV | RL = 50 Ω to GND | 23 |
| Frequency (differential formats) | F | 1 | 725 | MHz | LVPECL, low power LVPECL, LVDS, CML, HCSL | 24 | |
| Frequency (LVCMOS) | F | 1 | 200 | MHz | LVCMOS | 24 | |
| Duty Cycle (LVCMOS) | DC | 40 | 50 | 60 | % | 200 MHz, 20/80% TR/TF<10% of period (LVCMOS) (12 mA drive) | 24 |
| Duty Cycle (Differential) | DC | 48 | 50 | 52 | % | 80% TR/TF<10% of period (Differential) | 24 |
| Minimum Input Clock Slew Rate | SR | 0.75 | V/ns | Required to meet prop delay and additive jitter specifications (20-80%) | 24 | ||
| Output Rise/Fall Time LVDS | TR/TF | 325 | ps | LVDS, 20/80% | 24 | ||
| Output Rise/Fall Time LVPECL | TR/TF | 350 | ps | LVPECL, 20/80% | 24 | ||
| Output Rise/Fall Time HCSL | TR/TF | 280 | ps | HCSL, 20/80% | 24 | ||
| Output Rise/Fall Time CML | TR/TF | 350 | ps | CML, 20/80% | 24 | ||
| Output Rise/Fall Time Low-Power LVPECL | TR/TF | 350 | ps | Low-Power LVPECL, 20/80% | 24 | ||
| Output Rise/Fall Time LVCMOS | TR/TF | 750 | ps | LVCMOS 200 MHz, 20/80%, 2 pF load | 24 | ||
| Minimum Input Pulse Width | TW | 500 | ps | 24 | |||
| Propagation Delay LVCMOS | TPLH, TPHL | 1250 | 2000 | 2750 | ps | LVCMOS (12 mA drive with no load) | 24 |
| Propagation Delay LVPECL | TPLH, TPHL | 675 | 875 | 1075 | ps | LVPECL Si53306/7 | 24 |
| Propagation Delay LVDS | TPLH, TPHL | 675 | 875 | 1075 | ps | LVDS Si53306/7 | 24 |
| Part to Part Skew | TPS | 150 | ps | Differential | 25 | ||
| Storage Temperature | TS | -55 | 150 | °C | 28 | ||
| Supply Voltage | VDD | -0.5 | 3.8 | V | 28 | ||
| Input Voltage | VIN | -0.5 | 3.8 | V | Printed as -0.5 to VDD+ 0.3 V | 28 | |
| ESD Sensitivity HBM | HBM | 2000 | V | HBM, 100 pF, 1.5 kΩ | 28 | ||
| ESD Sensitivity CDM | CDM | 500 | V | 28 | |||
| Peak Soldering Reflow Temperature | TPEAK | 260 | °C | Pb-Free; Solder reflow profile per JEDEC J-STD-020 | 28 | ||
| Maximum Junction Temperature | TJ | 125 | °C | 28 | |||
| Thermal Resistance, Junction to Ambient | θJA | 60 | °C/W | 3 x 3 mm QFN, still air | 28 | ||
| Thermal Resistance, Junction to Case | θJC | 10.8 | °C/W | 3 x 3 mm QFN, still air | 28 | ||
| Thermal Resistance, Junction to Board | θJB | 34.1 | °C/W | 3 x 3 mm QFN, still air | 28 | ||
| Input Capacitance | CIN | 5 | pF | CLK0 and CLK1 pins with respect to GND | 20 | ||
| Output Buffer Supply Current LVPECL (3.3 V) | IDDOX | 35 | mA | LVPECL (3.3 V) Si53301/2/3/4/5/6/8, per output @ 100 MHz | 21 | ||
| Output Buffer Supply Current Low Power LVPECL (3.3 V) | IDDOX | 35 | mA | Low Power LVPECL (3.3 V) Si53301/2/4/5/6/7/8 | 21 | ||
| Output Buffer Supply Current LVDS (3.3 V) | IDDOX | 20 | mA | LVDS (3.3 V) | 21 | ||
| Output Buffer Supply Current CML (3.3V) | IDDOX | 40 | mA | CML (3.3V), Si53306 | 21 | ||
| Output Buffer Supply Current HCSL (3.3 V) | IDDOX | 35 | mA | HCSL, 100 MHz, 2 pF load (3.3 V) | 21 | ||
| Output Buffer Supply Current CMOS (3.3 V) | IDDOX | 20 | mA | CMOS (3.3 V, SFOUT = 0/1), per output, CL = 5 pF, 200 MHz Si53306/7 | 21 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| housing | PC | 4. Recommended card reflow profile is per the JEDEC/IPC J-STD-020 specification for Small Body Components. | 61 |
CAD (KiCad official)
- Symbol:
SI53306-B-GM - Footprint:
Package_DFN_QFN:QFN-16-1EP_3x3mm_P0.5mm_EP1.7x1.7mm - 3D model: QFN-16(3x3) (KiCad packages3D, STEP)
- 3D model files:
si53306-b-gm-etched.step/si53306-b-gm-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);si53306-b-gm.step/si53306-b-gm.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Skyworks Solutions datasheet (69 pp, sha256
6f53e1ff88331de1, retrieved 2026-10-30, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).