main
Ray
Publish 0.1.0
4b0b7cd
SI53304-B-GM
SILICON LABS · Clock Buffers, Drivers · QFN-32-EP(5x5)
SI53304-B-GM from SILICON LABS, in a QFN-32-EP(5x5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OE0 | input | Output enable for Output 0: when high Q0 is enabled, and when low Q is held low and Qb is held high for differential formats, with an internal pull-up resistor. |
| 2 | SFOUTA[1] | input | Three-level output signal format control for Bank A, internally biased at VDD/2 and can be left floating or tied to ground or VDD. |
| 3 | SFOUTA[0] | input | Three-level output signal format control for Bank A, internally biased at VDD/2 and can be left floating or tied to ground or VDD. |
| 4 | Q0b | output | Output clock 0 (complement). |
| 5 | Q0 | output | Output clock 0. |
| 6 | GND | power_in | Ground. |
| 7 | VDD | power_in | Core voltage supply, to be bypassed with a 1.0 µF capacitor placed as close to the VDD pin as possible. |
| 8 | CLK_SEL | input | Mux input select (LVCMOS): CLK1 is selected when high and CLK0 when low, with an internal pull-down resistor. |
| 9 | OE1 | input | Output enable for Output 1: when high Q1 is enabled, and when low Q is held low and Qb is held high for differential formats, with an internal pull-up resistor. |
| 10 | CLK0 | input | Input clock 0. |
| 11 | CLK0b | input | Input clock 0 (complement), connected to VDD/2 when CLK0 is driven by a single-ended input. |
| 12 | OE2 | input | Output enable for Output 2: when high Q2 is enabled, and when low Q is held low and Qb is held high for differential formats, with an internal pull-up resistor. |
| 13 | OE3 | input | Output enable for Output 3: when high Q3 is enabled, and when low Q is held low and Qb is held high for differential formats, with an internal pull-up resistor. |
| 14 | CLK1 | input | Input clock 1. |
| 15 | CLK1b | input | Input clock 1 (complement), connected to VDD/2 when CLK1 is driven by a single-ended input. |
| 16 | OE4 | input | Output enable for Output 4: when high Q4 is enabled, and when low Q is held low and Qb is held high for differential formats, with an internal pull-up resistor. |
| 17 | VREF | power_in | Reference voltage output (see section 2.3 Voltage Reference). |
| 18 | VDDOA | power_in | Output voltage supply for Bank A (Outputs Q0 to Q2), to be bypassed with a 1.0 µF capacitor placed as close to the VDDOA pin as possible. |
| 19 | VDDOB | power_in | Output voltage supply for Bank B (Outputs Q3 to Q5), to be bypassed with a 1.0 µF capacitor placed as close to the VDDOB pin as possible. |
| 20 | Q5b | output | Output clock 5 (complement). |
| 21 | Q5 | output | Output clock 5. |
| 22 | SFOUTB[0] | input | Three-level output signal format control for Bank B, internally biased at VDD/2 and can be left floating or tied to ground or VDD. |
| 23 | SFOUTB[1] | input | Three-level output signal format control for Bank B, internally biased at VDD/2 and can be left floating or tied to ground or VDD. |
| 24 | OE5 | input | Output enable for Output 5: when high Q5 is enabled, and when low Q is held low and Qb is held high for differential formats, with an internal pull-up resistor. |
| 25 | Q4b | output | Output clock 4 (complement). |
| 26 | Q4 | output | Output clock 4. |
| 27 | Q3b | output | Output clock 3 (complement). |
| 28 | Q3 | output | Output clock 3. |
| 29 | Q2b | output | Output clock 2 (complement). |
| 30 | Q2 | output | Output clock 2. |
| 31 | Q1b | output | Output clock 1 (complement). |
| 32 | Q1 | output | Output clock 1. |
| 33 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | SILICON LABS |
| Package | QFN-32-EP(5x5) |
| Category | Clock and Timing |
| Pins | 33 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Ambient Operating Temperature | TA | -40 | 85 | °C | 19 | ||
| Supply Voltage Range (LVDS, CML) | VDD | 1.71 | 1.8 | 1.89 | V | LVDS, CML | 19 |
| Supply Voltage Range (LVDS, CML) | VDD | 2.38 | 2.5 | 2.63 | V | LVDS, CML | 19 |
| Supply Voltage Range (LVDS, CML) | VDD | 2.97 | 3.3 | 3.63 | V | LVDS, CML | 19 |
| Supply Voltage Range (LVPECL, low power LVPECL, LVCMOS) | VDD | 2.38 | 2.5 | 2.63 | V | LVPECL, low power LVPECL, LVCMOS | 19 |
| Supply Voltage Range (LVPECL, low power LVPECL, LVCMOS) | VDD | 2.97 | 3.3 | 3.63 | V | LVPECL, low power LVPECL, LVCMOS | 19 |
| Supply Voltage Range (HCSL) | VDD | 2.97 | 3.3 | 3.63 | V | HCSL | 19 |
| Output Buffer Supply Voltage (LVDS, CML, LVCMOS) | VDDOX | 1.71 | 1.8 | 1.89 | V | LVDS, CML, LVCMOS | 19 |
| Output Buffer Supply Voltage (LVDS, CML, LVCMOS) | VDDOX | 2.38 | 2.5 | 2.63 | V | LVDS, CML, LVCMOS | 19 |
| Output Buffer Supply Voltage (LVDS, CML, LVCMOS) | VDDOX | 2.97 | 3.3 | 3.63 | V | LVDS, CML, LVCMOS | 19 |
| Output Buffer Supply Voltage (LVPECL, low power LVPECL, LVCMOS) | VDDOX | 2.38 | 2.5 | 2.63 | V | LVPECL, low power LVPECL, LVCMOS | 19 |
| Output Buffer Supply Voltage (LVPECL, low power LVPECL, LVCMOS) | VDDOX | 2.97 | 3.3 | 3.63 | V | LVPECL, low power LVPECL, LVCMOS | 19 |
| Output Buffer Supply Voltage (HCSL) | VDDOX | 2.97 | 3.3 | 3.63 | V | HCSL | 19 |
| Differential Input Common Mode Voltage | VCM | 0.05 | V | VDD = 2.5 V ± 5%, 3.3 V ± 10% | 19 | ||
| Differential Input Swing (peak-to-peak) | VIN | 0.2 | 2.2 | V | 19 | ||
| Supply Current | IDD | 65 | 100 | mA | 20 | ||
| Output Characteristics (LVPECL) Single-Ended Output Swing | VSE | 0.55 | 0.8 | 1.05 | V | 21 | |
| Output Characteristics (Low Power LVPECL) Single-Ended Output Swing | VSE | 0.25 | 0.6 | 0.85 | V | RL = 100 Ω across Qn and Qn | 21 |
| Output Characteristics (CML) Single-Ended Output Swing | VSE | 300 | 400 | 550 | mV | Terminated per Figure 2.9 (CML termination) | 21 |
| Output Characteristics (LVDS) Single-Ended Output Swing | VSE | 247 | 490 | mV | RL = 100 Ω across QN and QN | 22 | |
| Output Common Mode Voltage (VDDO = 2.5 V or 3.3 V) | VCOM1 | 1.1 | 1.25 | 1.35 | V | VDDOX = 2.38 to 2.63 V, 2.97 to 3.63 V, RL = 100 Ω across QN and QN | 22 |
| Output Common Mode Voltage (VDDO = 1.8 V) | VCOM2 | 0.85 | 0.97 | 1.25 | V | VDDOX = 1.71 to 1.89 V, RL = 100 Ω across QN and QN | 22 |
| Output Voltage High (HCSL) | VOH | 550 | 700 | 900 | mV | RL = 50 Ω to GND | 22 |
| Output Voltage Low (HCSL) | VOL | -150 | 0 | 150 | mV | RL = 50 Ω to GND | 22 |
| Single-Ended Output Swing (HCSL) | VSE | 550 | 700 | 850 | mV | RL = 50 Ω to GND | 22 |
| Crossing Voltage (HCSL) | VC | 250 | 350 | 550 | mV | RL = 50 Ω to GND | 22 |
| Internal Pull-down Resistor | RDOWN | 25 | kΩ | CLK_SEL, DIVx, SFOUTx | 20 | ||
| Internal Pull-up Resistor | RUP | 25 | kΩ | OEx, DIVx, SFOUTx | 21 | ||
| Input Capacitance | CIN | 5 | pF | CLK0 and CLK1 pins with respect to GND | 19 | ||
| Storage Temperature | TS | -55 | 150 | °C | 27 | ||
| Supply Voltage | VDD | -0.5 | 3.8 | V | 27 | ||
| ESD Sensitivity HBM | 2000 | V | HBM, 100 pF, 1.5 kΩ | 27 | |||
| ESD Sensitivity CDM | 500 | V | 27 | ||||
| Peak Soldering Reflow Temperature | TPEAK | 260 | °C | Pb-Free; solder reflow profile per JEDEC J-STD-020 | 27 | ||
| Maximum Junction Temperature | TJ | 125 | °C | 27 | |||
| Frequency (LVPECL, low power LVPECL, LVDS, CML, HCSL) | F | 1 | 725 | MHz | 23 | ||
| Frequency (LVCMOS) | F | 1 | 200 | MHz | 23 | ||
| Minimum Input Clock Slew Rate | SR | 0.75 | V/ns | Required to meet prop delay and additive jitter specifications (20-80%) | 23 | ||
| Minimum Input Pulse Width | TW | 500 | ps | 23 | |||
| Duty Cycle (LVCMOS) | DC | 40 | 60 | % | 200 MHz, 20/80% TR/TF <10% of period (LVCMOS) (12 mA drive) | 23 | |
| Duty Cycle (Differential) | DC | 48 | 50 | 52 | % | 80% TR/TF <10% of period (Differential) | 23 |
| Output Rise/Fall Time (LVDS) | TR/TF | 325 | ps | LVDS, 20/80% | 23 | ||
| Output Rise/Fall Time (LVPECL) | TR/TF | 350 | ps | LVPECL, 20/80% | 23 | ||
| Output Rise/Fall Time (HCSL) | TR/TF | 280 | ps | HCSL, 20/80% | 23 | ||
| Output Rise/Fall Time (CML) | TR/TF | 350 | ps | CML, 20/80% | 23 | ||
| Output Rise/Fall Time (Low-Power LVPECL) | TR/TF | 350 | ps | Low-Power LVPECL, 20/80% | 23 | ||
| Output Rise/Fall Time (LVCMOS) | TR/TF | 750 | ps | LVCMOS 200 MHz, 20/80%, 2 pF load | 23 | ||
| Propagation Delay (LVCMOS) | TPLH, TPHL | 1250 | 2000 | 2750 | ps | LVCMOS (12 mA drive with no load) | 23 |
| Propagation Delay (LVPECL, Si53301/2/3/4/5/8) | TPLH, TPHL | 600 | 800 | 1000 | ps | LVPECL Si53301/2/3/4/5/8 | 23 |
| Propagation Delay (LVDS, Si53301/2/3/4/5/8) | TPLH, TPHL | 600 | 800 | 1000 | ps | LVDS Si53301/2/3/4/5/8 | 23 |
| Output to Output Skew (LVCMOS) | TSK | 50 | 120 | ps | LVCMOS (12 mA drive to no load) | 23 | |
| Output to Output Skew (LVPECL) | TSK | 35 | 75 | ps | LVPECL | 23 | |
| Output to Output Skew (LVDS) | TSK | 35 | 85 | ps | LVDS | 23 | |
| Part to Part Skew | TPS | 150 | ps | Differential | 23 | ||
| LOSx Clear Time (F > 100 MHz) | TLOSCLR | 25 | ns | F > 100 MHz | 23 | ||
| LOSx Activation Time | TLOSACT | 15 | µs | 23 | |||
| Thermal Resistance, Junction to Ambient (5x5 mm QFN) | θJA | 50.3 | °C/W | Still air | 27 | ||
| Thermal Resistance, Junction to Case (5x5 mm QFN) | θJC | 10.3 | °C/W | Still air | 27 | ||
| Thermal Resistance, Junction to Board (5x5 mm QFN) | θJB | 30.9 | °C/W | Still air | 27 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| housing | PC | 4. Recommended card reflow profile is per the JEDEC/IPC J-STD-020 specification for Small Body Components. | 60 |
CAD (KiCad official)
- Symbol:
SI53304-B-GM - Footprint:
Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.3x3.3mm - 3D model: QFN-32-EP(5x5) (KiCad packages3D, STEP)
- 3D model files:
si53304-b-gm-etched.step/si53304-b-gm-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);si53304-b-gm.step/si53304-b-gm.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: SILICON LABS datasheet (68 pp, sha256
4d316334eb492a02, retrieved 2026-11-02, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# SI53304-B-GM
**SILICON LABS** · Clock Buffers, Drivers · QFN-32-EP(5x5)
SI53304-B-GM from SILICON LABS, in a QFN-32-EP(5x5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OE0 | input | Output enable for Output 0: when high Q0 is enabled, and when low Q is held low and Qb is held high for differential formats, with an internal pull-up resistor. |
| 2 | SFOUTA[1] | input | Three-level output signal format control for Bank A, internally biased at VDD/2 and can be left floating or tied to ground or VDD. |
| 3 | SFOUTA[0] | input | Three-level output signal format control for Bank A, internally biased at VDD/2 and can be left floating or tied to ground or VDD. |
| 4 | Q0b | output | Output clock 0 (complement). |
| 5 | Q0 | output | Output clock 0. |
| 6 | GND | power_in | Ground. |
| 7 | VDD | power_in | Core voltage supply, to be bypassed with a 1.0 µF capacitor placed as close to the VDD pin as possible. |
| 8 | CLK_SEL | input | Mux input select (LVCMOS): CLK1 is selected when high and CLK0 when low, with an internal pull-down resistor. |
| 9 | OE1 | input | Output enable for Output 1: when high Q1 is enabled, and when low Q is held low and Qb is held high for differential formats, with an internal pull-up resistor. |
| 10 | CLK0 | input | Input clock 0. |
| 11 | CLK0b | input | Input clock 0 (complement), connected to VDD/2 when CLK0 is driven by a single-ended input. |
| 12 | OE2 | input | Output enable for Output 2: when high Q2 is enabled, and when low Q is held low and Qb is held high for differential formats, with an internal pull-up resistor. |
| 13 | OE3 | input | Output enable for Output 3: when high Q3 is enabled, and when low Q is held low and Qb is held high for differential formats, with an internal pull-up resistor. |
| 14 | CLK1 | input | Input clock 1. |
| 15 | CLK1b | input | Input clock 1 (complement), connected to VDD/2 when CLK1 is driven by a single-ended input. |
| 16 | OE4 | input | Output enable for Output 4: when high Q4 is enabled, and when low Q is held low and Qb is held high for differential formats, with an internal pull-up resistor. |
| 17 | VREF | power_in | Reference voltage output (see section 2.3 Voltage Reference). |
| 18 | VDDOA | power_in | Output voltage supply for Bank A (Outputs Q0 to Q2), to be bypassed with a 1.0 µF capacitor placed as close to the VDDOA pin as possible. |
| 19 | VDDOB | power_in | Output voltage supply for Bank B (Outputs Q3 to Q5), to be bypassed with a 1.0 µF capacitor placed as close to the VDDOB pin as possible. |
| 20 | Q5b | output | Output clock 5 (complement). |
| 21 | Q5 | output | Output clock 5. |
| 22 | SFOUTB[0] | input | Three-level output signal format control for Bank B, internally biased at VDD/2 and can be left floating or tied to ground or VDD. |
| 23 | SFOUTB[1] | input | Three-level output signal format control for Bank B, internally biased at VDD/2 and can be left floating or tied to ground or VDD. |
| 24 | OE5 | input | Output enable for Output 5: when high Q5 is enabled, and when low Q is held low and Qb is held high for differential formats, with an internal pull-up resistor. |
| 25 | Q4b | output | Output clock 4 (complement). |
| 26 | Q4 | output | Output clock 4. |
| 27 | Q3b | output | Output clock 3 (complement). |
| 28 | Q3 | output | Output clock 3. |
| 29 | Q2b | output | Output clock 2 (complement). |
| 30 | Q2 | output | Output clock 2. |
| 31 | Q1b | output | Output clock 1 (complement). |
| 32 | Q1 | output | Output clock 1. |
| 33 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | SILICON LABS |
| Package | QFN-32-EP(5x5) |
| Category | Clock and Timing |
| Pins | 33 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Ambient Operating Temperature | TA | -40 | | 85 | °C | | 19 |
| Supply Voltage Range (LVDS, CML) | VDD | 1.71 | 1.8 | 1.89 | V | LVDS, CML | 19 |
| Supply Voltage Range (LVDS, CML) | VDD | 2.38 | 2.5 | 2.63 | V | LVDS, CML | 19 |
| Supply Voltage Range (LVDS, CML) | VDD | 2.97 | 3.3 | 3.63 | V | LVDS, CML | 19 |
| Supply Voltage Range (LVPECL, low power LVPECL, LVCMOS) | VDD | 2.38 | 2.5 | 2.63 | V | LVPECL, low power LVPECL, LVCMOS | 19 |
| Supply Voltage Range (LVPECL, low power LVPECL, LVCMOS) | VDD | 2.97 | 3.3 | 3.63 | V | LVPECL, low power LVPECL, LVCMOS | 19 |
| Supply Voltage Range (HCSL) | VDD | 2.97 | 3.3 | 3.63 | V | HCSL | 19 |
| Output Buffer Supply Voltage (LVDS, CML, LVCMOS) | VDDOX | 1.71 | 1.8 | 1.89 | V | LVDS, CML, LVCMOS | 19 |
| Output Buffer Supply Voltage (LVDS, CML, LVCMOS) | VDDOX | 2.38 | 2.5 | 2.63 | V | LVDS, CML, LVCMOS | 19 |
| Output Buffer Supply Voltage (LVDS, CML, LVCMOS) | VDDOX | 2.97 | 3.3 | 3.63 | V | LVDS, CML, LVCMOS | 19 |
| Output Buffer Supply Voltage (LVPECL, low power LVPECL, LVCMOS) | VDDOX | 2.38 | 2.5 | 2.63 | V | LVPECL, low power LVPECL, LVCMOS | 19 |
| Output Buffer Supply Voltage (LVPECL, low power LVPECL, LVCMOS) | VDDOX | 2.97 | 3.3 | 3.63 | V | LVPECL, low power LVPECL, LVCMOS | 19 |
| Output Buffer Supply Voltage (HCSL) | VDDOX | 2.97 | 3.3 | 3.63 | V | HCSL | 19 |
| Differential Input Common Mode Voltage | VCM | 0.05 | | | V | VDD = 2.5 V ± 5%, 3.3 V ± 10% | 19 |
| Differential Input Swing (peak-to-peak) | VIN | 0.2 | | 2.2 | V | | 19 |
| Supply Current | IDD | | 65 | 100 | mA | | 20 |
| Output Characteristics (LVPECL) Single-Ended Output Swing | VSE | 0.55 | 0.8 | 1.05 | V | | 21 |
| Output Characteristics (Low Power LVPECL) Single-Ended Output Swing | VSE | 0.25 | 0.6 | 0.85 | V | RL = 100 Ω across Qn and Qn | 21 |
| Output Characteristics (CML) Single-Ended Output Swing | VSE | 300 | 400 | 550 | mV | Terminated per Figure 2.9 (CML termination) | 21 |
| Output Characteristics (LVDS) Single-Ended Output Swing | VSE | 247 | | 490 | mV | RL = 100 Ω across QN and QN | 22 |
| Output Common Mode Voltage (VDDO = 2.5 V or 3.3 V) | VCOM1 | 1.1 | 1.25 | 1.35 | V | VDDOX = 2.38 to 2.63 V, 2.97 to 3.63 V, RL = 100 Ω across QN and QN | 22 |
| Output Common Mode Voltage (VDDO = 1.8 V) | VCOM2 | 0.85 | 0.97 | 1.25 | V | VDDOX = 1.71 to 1.89 V, RL = 100 Ω across QN and QN | 22 |
| Output Voltage High (HCSL) | VOH | 550 | 700 | 900 | mV | RL = 50 Ω to GND | 22 |
| Output Voltage Low (HCSL) | VOL | -150 | 0 | 150 | mV | RL = 50 Ω to GND | 22 |
| Single-Ended Output Swing (HCSL) | VSE | 550 | 700 | 850 | mV | RL = 50 Ω to GND | 22 |
| Crossing Voltage (HCSL) | VC | 250 | 350 | 550 | mV | RL = 50 Ω to GND | 22 |
| Internal Pull-down Resistor | RDOWN | | 25 | | kΩ | CLK_SEL, DIVx, SFOUTx | 20 |
| Internal Pull-up Resistor | RUP | | 25 | | kΩ | OEx, DIVx, SFOUTx | 21 |
| Input Capacitance | CIN | | 5 | | pF | CLK0 and CLK1 pins with respect to GND | 19 |
| Storage Temperature | TS | -55 | | 150 | °C | | 27 |
| Supply Voltage | VDD | -0.5 | | 3.8 | V | | 27 |
| ESD Sensitivity HBM | | | | 2000 | V | HBM, 100 pF, 1.5 kΩ | 27 |
| ESD Sensitivity CDM | | | | 500 | V | | 27 |
| Peak Soldering Reflow Temperature | TPEAK | | | 260 | °C | Pb-Free; solder reflow profile per JEDEC J-STD-020 | 27 |
| Maximum Junction Temperature | TJ | | | 125 | °C | | 27 |
| Frequency (LVPECL, low power LVPECL, LVDS, CML, HCSL) | F | 1 | | 725 | MHz | | 23 |
| Frequency (LVCMOS) | F | 1 | | 200 | MHz | | 23 |
| Minimum Input Clock Slew Rate | SR | 0.75 | | | V/ns | Required to meet prop delay and additive jitter specifications (20-80%) | 23 |
| Minimum Input Pulse Width | TW | 500 | | | ps | | 23 |
| Duty Cycle (LVCMOS) | DC | 40 | | 60 | % | 200 MHz, 20/80% TR/TF <10% of period (LVCMOS) (12 mA drive) | 23 |
| Duty Cycle (Differential) | DC | 48 | 50 | 52 | % | 80% TR/TF <10% of period (Differential) | 23 |
| Output Rise/Fall Time (LVDS) | TR/TF | | | 325 | ps | LVDS, 20/80% | 23 |
| Output Rise/Fall Time (LVPECL) | TR/TF | | | 350 | ps | LVPECL, 20/80% | 23 |
| Output Rise/Fall Time (HCSL) | TR/TF | | | 280 | ps | HCSL, 20/80% | 23 |
| Output Rise/Fall Time (CML) | TR/TF | | | 350 | ps | CML, 20/80% | 23 |
| Output Rise/Fall Time (Low-Power LVPECL) | TR/TF | | | 350 | ps | Low-Power LVPECL, 20/80% | 23 |
| Output Rise/Fall Time (LVCMOS) | TR/TF | | | 750 | ps | LVCMOS 200 MHz, 20/80%, 2 pF load | 23 |
| Propagation Delay (LVCMOS) | TPLH, TPHL | 1250 | 2000 | 2750 | ps | LVCMOS (12 mA drive with no load) | 23 |
| Propagation Delay (LVPECL, Si53301/2/3/4/5/8) | TPLH, TPHL | 600 | 800 | 1000 | ps | LVPECL Si53301/2/3/4/5/8 | 23 |
| Propagation Delay (LVDS, Si53301/2/3/4/5/8) | TPLH, TPHL | 600 | 800 | 1000 | ps | LVDS Si53301/2/3/4/5/8 | 23 |
| Output to Output Skew (LVCMOS) | TSK | | 50 | 120 | ps | LVCMOS (12 mA drive to no load) | 23 |
| Output to Output Skew (LVPECL) | TSK | | 35 | 75 | ps | LVPECL | 23 |
| Output to Output Skew (LVDS) | TSK | | 35 | 85 | ps | LVDS | 23 |
| Part to Part Skew | TPS | | | 150 | ps | Differential | 23 |
| LOSx Clear Time (F > 100 MHz) | TLOSCLR | | 25 | | ns | F > 100 MHz | 23 |
| LOSx Activation Time | TLOSACT | | 15 | | µs | | 23 |
| Thermal Resistance, Junction to Ambient (5x5 mm QFN) | θJA | | 50.3 | | °C/W | Still air | 27 |
| Thermal Resistance, Junction to Case (5x5 mm QFN) | θJC | | 10.3 | | °C/W | Still air | 27 |
| Thermal Resistance, Junction to Board (5x5 mm QFN) | θJB | | 30.9 | | °C/W | Still air | 27 |
## Materials and finish
As the datasheet states them (page.json `metadata.appearance`; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| housing | PC | | 4. Recommended card reflow profile is per the JEDEC/IPC J-STD-020 specification for Small Body Components. | 60 |
## CAD (KiCad official)
- Symbol: `SI53304-B-GM`
- Footprint: `Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.3x3.3mm`
- 3D model: QFN-32-EP(5x5) (KiCad packages3D, STEP)
- 3D model files: `si53304-b-gm-etched.step` / `si53304-b-gm-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `si53304-b-gm.step` / `si53304-b-gm.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [SILICON LABS datasheet](docs/si53304-b-gm-datasheet.pdf) (68 pp, sha256 `4d316334eb492a02`, retrieved 2026-11-02, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/si53304-b-gm-datasheet.pdf)