main
Ray Publish 0.1.0 01f7717

SI52144-A01AGMR

SILICON LABS · Clock / Timing - Application Specific · QFN-24-EP(4x4)

SI52144-A01AGMR from SILICON LABS, in a QFN-24-EP(4x4). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VDD_DIFF power_in 3.3 V power supply for the differential clock outputs.
2 OE1 input Active high input that enables or disables the DIFF1 clock, with an internal 100 kΩ pull-up.
3 SSON input 3.3 V spread-control input with an internal 100 kΩ pull-down; when sampled high, -0.5% spread is enabled on all DIFF outputs.
4 VSS power_in Ground.
5 OE2 input Active high input that enables or disables the DIFF2 clock, with an internal 100 kΩ pull-up.
6 VDD_DIFF power_in 3.3 V power supply for the differential clock outputs.
7 OE0 input Active high input that enables or disables the DIFF0 clock, with an internal 100 kΩ pull-up.
8 DIFF0 output 0.7 V, 100 MHz differential clock output (one leg of DIFF0 pair as printed in the table).
9 DIFF0 output 0.7 V, 100 MHz differential clock output (second leg of DIFF0 pair as printed in the table).
10 DIFF1 output 0.7 V, 100 MHz differential clock output (one leg of DIFF1 pair as printed in the table).
11 DIFF1 output 0.7 V, 100 MHz differential clock output (second leg of DIFF1 pair as printed in the table).
12 VDD_DIFF power_in 3.3 V power supply for the differential clock outputs.
13 DIFF2 output 0.7 V, 100 MHz differential clock output (one leg of DIFF2 pair as printed in the table).
14 DIFF2 output 0.7 V, 100 MHz differential clock output (second leg of DIFF2 pair as printed in the table).
15 DIFF3 output 0.7 V, 100 MHz differential clock output (one leg of DIFF3 pair as printed in the table).
16 DIFF3 output 0.7 V, 100 MHz differential clock output (second leg of DIFF3 pair as printed in the table).
17 VDD_DIFF power_in 3.3 V power supply for the differential clock outputs.
18 OE3 input Active high input that enables or disables the DIFF3 clock, with an internal 100 kΩ pull-up.
19 SCLK input I2C serial clock input.
20 SDATA bidirectional I2C serial data input/output.
21 VDD_CORE power_in 3.3 V power supply for the core.
22 XOUT output 25.00 MHz crystal output; float XOUT when only the CLKIN clock input is used.
23 XIN/CLKIN input 25.00 MHz crystal input or 3.3 V, 25 MHz clock input.
24 VSS_CORE power_in Ground for the core.
25 GND power_in Ground for the bottom (exposed) pad of the IC.

Key specifications

Parameter Value
Manufacturer SILICON LABS
Package QFN-24-EP(4x4)
Category Clock and Timing
Pins 25

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
3.3 V Operating Voltage VDD 3.135 3.3 3.465 V 3.3 ±5% 4
3.3 V Input High Voltage VIH 2 V Control input pins 4
3.3 V Input Low Voltage VIL 0.8 V Control input pins 4
Input High Voltage (I2C) VIHI2C 2.2 V SDATA, SCLK 4
Input Low Voltage (I2C) VILI2C 1 V SDATA, SCLK 4
Input High Leakage Current IIH 5 A Except internal pull-down resistors, 0 < VIN < VDD 4
Input Low Leakage Current IIL -5 A Except internal pull-up resistors, 0 < VIN < VDD 4
High-impedance Output Current IOZ -10 10 A 4
Input Pin Capacitance CIN 1.5 5 pF 4
Output Pin Capacitance COUT 6 pF 4
Pin Inductance LIN 7 nH 4
Dynamic Supply Current IDD_3.3V 50 mA All outputs enabled. Differential clocks with 5” traces and 2 pF load. 4
Crystal Long-term Accuracy LACC 250 ppm Measured at VDD/2 differential 5
Clock Input Duty Cycle TDC 45 55 % Measured at VDD/2 5
CLKIN Rising and Falling Slew Rate TR/TF 0.5 4 V/ns Measured between 0.2 VDD and 0.8 VDD 5
Cycle to Cycle Jitter (clock input) TCCJ 250 ps Measured at VDD/2 5
Long Term Jitter TLTJ 350 ps Measured at VDD/2 5
Input High Voltage (XIN/CLKIN) VIH 2 V XIN/CLKIN pin 5
Input Low Voltage (XIN/CLKIN) VIL 0.8 V XIN/CLKIN pin 5
Input High Current (XIN/CLKIN) IIH 35 uA XIN/CLKIN pin, VIN = VDD 5
Input Low Current (XIN/CLKIN) IIL -35 uA XIN/CLKIN pin, 0 < VIN <0.8 5
DIFF Duty Cycle TDC 45 55 % Measured at 0 V differential 5
Output-to-Output Skew TSKEW 50 ps Measured at 0 V differential 5
DIFF Cycle to Cycle Jitter TCCJ 35 50 ps Measured at 0 V differential 5
PCIe Gen 1 Pk-Pk Jitter, Common Clock 0 40 50 ps Pk-Pk PCIe Gen 1 5
PCIe Gen 2 Phase Jitter, Common Clock (10 kHz to 1.5 MHz) RMSGEN2 0 1.8 2 ps 10 kHz < F < 1.5 MHz 5
PCIe Gen 2 Phase Jitter, Common Clock (1.5 MHz to Nyquist) RMSGEN2 0 1.8 2.1 ps 1.5 MHz< F < Nyquist Rate 5
PCIe Gen 3 Phase Jitter, Common Clock RMSGEN3 0 0.45 0.6 ps PLL BW of 2-4 or 2-5 MHz, CDR = 10 MHz 5
PCIe Gen 3 Phase Jitter, Separate Reference No Spread (SRNS) RMSGEN3_SRNS 0.35 0.42 ps PLL BW of 2-4 or 2-5 MHz, CDR = 10 MHz 5
PCIe Gen 4 Phase Jitter, Common Clock RMSGEN4 0.45 0.6 ps PLL BW of 2-4 or 2-5 MHz, CDR = 10 MHz 5
Long Term Accuracy (DIFF) LACC 100 ppm Measured at 0 V differential 5
DIFF Rising/Falling Slew Rate TR/TF 1 8 V/ns Measured differentially from ±150 mV 5
Voltage High VHIGH 1.15 V 5
Voltage Low VLOW -0.3 V 5
Crossing Point Voltage at 0.7 V Swing VOX 300 550 mV 5
Modulation Frequency FMOD 30 31.5 33 kHz 5
Clock Stabilization from Power-up TSTABLE 1.8 ms Measured from the point when both VDD and clock input are valid. 6
Stopclock Set-up Time TSS 10 ns 6
Spread Range (down spread) SPR -0.5 % Down spread 5
Main Supply Voltage VDD_3.3V 4.6 V Functional 6
Input Voltage VIN -0.5 4.6 VDC Relative to VSS 6
Temperature, Storage TS -65 150 °C Non-functional 6
Temperature, Operating Ambient TA -40 85 °C Functional 6
Temperature, Junction TJ 150 °C Functional 6
Dissipation, Junction to Case ØJC 25 °C/W JEDEC (JESD 51) 6
Dissipation, Junction to Ambient ØJA 37 °C/W JEDEC (JESD 51) 6
ESD Protection (Human Body Model) ESDHBM 2000 V JEDEC (JESD 22-A114) 6

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
housing abs 2. Gen 4 specifications based on the PCI-Express Base Specification 4.0 rev. 0.5. 3. Download the Silicon Labs PCIe Clock Jitter Tool at www.silabs.com/pcie-learningcenter. 5

CAD (KiCad official)

  • Symbol: SI52144-A01AGMR
  • Footprint: Package_DFN_QFN:QFN-24-1EP_4x4mm_P0.5mm_EP2.6x2.6mm
  • 3D model: QFN-24-EP(4x4) (KiCad packages3D, STEP)
  • 3D model files: si52144-a01agmr-etched.step / si52144-a01agmr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); si52144-a01agmr.step / si52144-a01agmr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: SILICON LABS datasheet (23 pp, sha256 4178ac8ace4feef8, retrieved 2026-10-30, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF