Generated by kicad-footprint-generator · KiCad file format 20260206
SI52144-A01AGM
SILICON LABS · Clock / Timing - Application Specific · QFN-24-EP(4x4)
SI52144-A01AGM from SILICON LABS, in a QFN-24-EP(4x4). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD_DIFF | power_in | 3.3 V power supply for the differential output buffers. |
| 2 | OE1 | input | Active high input pin to enable or disable the DIFF1 clock, with an internal 100 k pull-up. |
| 3 | SSON | input | 3.3 V input for spread spectrum control, with an internal 100 k pull-down. |
| 4 | VSS | power_in | Ground. |
| 5 | OE2 | input | Active high input pin to enable or disable the DIFF2 clock, with an internal 100 k pull-up. |
| 6 | VDD_DIFF | power_in | 3.3 V power supply for the differential output buffers. |
| 7 | OE0 | input | Active high input pin to enable or disable the DIFF0 clock, with an internal 100 k pull-up. |
| 8 | DIFF0 | output | 0.7 V, 100 MHz differential clock output. |
| 9 | DIFF0 | output | 0.7 V, 100 MHz differential clock output. |
| 10 | DIFF1 | output | 0.7 V, 100 MHz differential clock output. |
| 11 | DIFF1 | output | 0.7 V, 100 MHz differential clock output. |
| 12 | VDD_DIFF | power_in | 3.3 V power supply for the differential output buffers. |
| 13 | DIFF2 | output | 0.7 V, 100 MHz differential clock output. |
| 14 | DIFF2 | output | 0.7 V, 100 MHz differential clock output. |
| 15 | DIFF3 | output | 0.7 V, 100 MHz differential clock output. |
| 16 | DIFF3 | output | 0.7 V, 100 MHz differential clock output. |
| 17 | VDD_DIFF | power_in | 3.3 V power supply for the differential output buffers. |
| 18 | OE3 | input | Active high input pin to enable or disable the DIFF3 clock, with an internal 100 k pull-up. |
| 19 | SCLK | input | I2C serial clock input. |
| 20 | SDATA | bidirectional | I2C serial data input/output. |
| 21 | VDD_CORE | power_in | 3.3 V power supply for the core. |
| 22 | XOUT | output | 25.00 MHz crystal output; float XOUT when only CLKIN (clock input) is used. |
| 23 | XIN/CLKIN | input | 25.00 MHz crystal input or 3.3 V, 25 MHz clock input. |
| 24 | VSS_CORE | power_in | Ground for the core. |
| 25 | GND | power_in | Ground for the bottom pad of the IC (exposed pad). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | SILICON LABS |
| Package | QFN-24-EP(4x4) |
| Category | Clock and Timing |
| Pins | 25 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| 3.3 V Operating Voltage | VDD | 3.135 | 3.3 | 3.465 | V | 3.3 ±5% | 4 |
| 3.3 V Input High Voltage | VIH | 2 | V | Control input pins | 4 | ||
| 3.3 V Input Low Voltage | VIL | 0.8 | V | Control input pins | 4 | ||
| Input High Voltage | VIHI2C | 2.2 | V | SDATA, SCLK | 4 | ||
| Input Low Voltage | VILI2C | 1 | V | SDATA, SCLK | 4 | ||
| Input High Leakage Current | IIH | 5 | µA | Except internal pull-down resistors, 0 < VIN < VDD | 4 | ||
| Input Low Leakage Current | IIL | -5 | µA | Except internal pull-up resistors, 0 < VIN < VDD | 4 | ||
| High-impedance Output Current | IOZ | -10 | 10 | µA | 4 | ||
| Input Pin Capacitance | CIN | 1.5 | 5 | pF | 4 | ||
| Output Pin Capacitance | COUT | 6 | pF | 4 | |||
| Pin Inductance | LIN | 7 | nH | 4 | |||
| Dynamic Supply Current | IDD_3.3V | 50 | mA | All outputs enabled. Differential clocks with 5” traces and 2 pF load. | 4 | ||
| Long-term Accuracy (crystal) | LACC | 250 | ppm | Measured at VDD/2 differential | 5 | ||
| Clock Input Duty Cycle | TDC | 45 | 55 | % | Measured at VDD/2 | 5 | |
| CLKIN Rising and Falling Slew Rate | TR/TF | 0.5 | 4 | V/ns | Measured between 0.2 VDD and 0.8 VDD | 5 | |
| Clock Input Cycle to Cycle Jitter | TCCJ | 250 | ps | Measured at VDD/2 | 5 | ||
| Clock Input Long Term Jitter | TLTJ | 350 | ps | Measured at VDD/2 | 5 | ||
| Input High Voltage (XIN/CLKIN) | VIH | 2 | V | XIN/CLKIN pin | 5 | ||
| Input Low Voltage (XIN/CLKIN) | VIL | 0.8 | V | XIN/CLKIN pin | 5 | ||
| Input High Current (XIN/CLKIN) | IIH | 35 | uA | XIN/CLKIN pin, VIN = VDD | 5 | ||
| Input Low Current (XIN/CLKIN) | IIL | -35 | uA | XIN/CLKIN pin, 0 < VIN <0.8 | 5 | ||
| DIFF Duty Cycle | TDC | 45 | 55 | % | Measured at 0 V differential | 5 | |
| Output-to-Output Skew | TSKEW | 50 | ps | Measured at 0 V differential | 5 | ||
| PCIe Gen 2 Phase Jitter, Common Clock (10 kHz to 1.5 MHz) | RMSGEN2 | 0 | 1.8 | 2 | ps | 10 kHz < F < 1.5 MHz | 5 |
| PCIe Gen 2 Phase Jitter, Common Clock (1.5 MHz to Nyquist) | RMSGEN2 | 0 | 1.8 | 2.1 | ps | 1.5 MHz< F < Nyquist Rate | 5 |
| PCIe Gen 3 Phase Jitter, Common Clock | RMSGEN3 | 0 | 0.45 | 0.6 | ps | PLL BW of 2-4 or 2-5 MHz, CDR = 10 MHz | 5 |
| Long Term Accuracy | LACC | 100 | ppm | Measured at 0 V differential | 5 | ||
| DIFF Rising/Falling Slew Rate | TR/TF | 1 | 8 | V/ns | Measured differentially from ±150 mV | 5 | |
| Voltage High | VHIGH | 1.15 | V | 5 | |||
| Voltage Low | VLOW | -0.3 | V | 5 | |||
| Crossing Point Voltage at 0.7 V Swing | VOX | 300 | 550 | mV | 5 | ||
| Modulation Frequency | FMOD | 30 | 31.5 | 33 | kHz | 5 | |
| Clock Stabilization from Power-up | TSTABLE | 1.8 | ms | Measured from the point when both VDD and clock input are valid. | 6 | ||
| Stopclock Set-up Time | TSS | 10 | ns | 6 | |||
| Main Supply Voltage | VDD_3.3V | 4.6 | V | Functional | 6 | ||
| Input Voltage | VIN | -0.5 | 4.6 | VDC | Relative to VSS | 6 | |
| Temperature, Storage | TS | -65 | 150 | °C | Non-functional | 6 | |
| Temperature, Operating Ambient | TA | -40 | 85 | °C | Functional | 6 | |
| Temperature, Junction | TJ | 150 | °C | Functional | 6 | ||
| Dissipation, Junction to Case | ØJC | 25 | °C/W | JEDEC (JESD 51) | 6 | ||
| Dissipation, Junction to Ambient | ØJA | 37 | °C/W | JEDEC (JESD 51) | 6 | ||
| ESD Protection (Human Body Model) | ESDHBM | 2000 | V | JEDEC (JESD 22-A114) | 6 | ||
| Spread Range | SPR | -0.5 | % | Down spread | 5 | ||
| PCIe Gen 1 Pk-Pk Jitter, Common Clock | 40 | 50 | ps | Pk-Pk PCIe Gen 1, Common Clock | 5 | ||
| PCIe Gen 3 Phase Jitter, Separate Reference No Spread (SRNS) | RMSGEN3_SRNS | 0.35 | 0.42 | ps | PLL BW of 2-4 or 2-5 MHz, CDR = 10 MHz | 5 | |
| PCIe Gen 4 Phase Jitter, Common Clock | RMSGEN4 | 0.45 | 0.6 | ps | PLL BW of 2-4 or 2-5 MHz, CDR = 10 MHz | 5 | |
| Output Cycle to Cycle Jitter | TCCJ | 35 | 50 | ps | Measured at 0 V differential | 5 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| housing | abs | 2. Gen 4 specifications based on the PCI-Express Base Specification 4.0 rev. 0.5. 3. Download the Silicon Labs PCIe Clock Jitter Tool at www.silabs.com/pcie-learningcenter. | 5 |
CAD (KiCad official)
- Symbol:
SI52144-A01AGM - Footprint:
Package_DFN_QFN:QFN-24-1EP_4x4mm_P0.5mm_EP2.6x2.6mm - 3D model: QFN-24-EP(4x4) (KiCad packages3D, STEP)
- 3D model files:
si52144-a01agm-etched.step/si52144-a01agm-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);si52144-a01agm.step/si52144-a01agm.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: SILICON LABS datasheet (23 pp, sha256
4178ac8ace4feef8, retrieved 2026-11-02, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).