main
Ray Publish 0.1.0 b680dd5
{
  "slug": "si14t",
  "version": "0.1.0",
  "type": "component",
  "description": "Nanjing Zhongke Microelectronics Touch Sensors, QFN-32(5x5). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "sensors",
    "si14t",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "si14t.kicad_sym",
    "si14t.kicad_mod",
    "si14t.glb",
    "si14t.step",
    "si14t.lbr",
    "docs/hero.png",
    "docs/si14t-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "si14t-hero.glb",
    "si14t-hero.overlay.json",
    "si14t-etched.glb"
  ],
  "component": {
    "mpn": "Si14T",
    "manufacturer": "Nanjing Zhongke Microelectronics",
    "package": "QFN-32(5x5)",
    "pin_count": 33,
    "category": "Sensors",
    "subcategory": "Touch Sensors",
    "datasheet": "https://datasheet.lcsc.com/datasheet/pdf/7857c0f4f85fcb2e7faeb185fc0a696f.pdf",
    "parts": {
      "symbol": "si14t.kicad_sym",
      "footprint": "si14t.kicad_mod",
      "model_3d": "si14t-hero.glb",
      "model_3d_plain": "si14t-etched.glb",
      "model_3d_step": "si14t-etched.step",
      "model_3d_step_plain": "si14t.step",
      "lbr": "si14t.lbr"
    },
    "distributor_links": {
      "lcsc": "C2916911"
    },
    "distributor_check": {
      "checked_at": "2026-10-23T12:20:17Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": null,
        "status": "no match"
      },
      "mouser": {
        "pn": null,
        "status": "no match"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "IBA",
        "type": "input",
        "description": "Analog input for internal bias adjustment; resistor RB sets the oscillator and internal bias current (RB recommended 100 kΩ to 1500 kΩ, typical 510 kΩ), with CB (typ. 820 pF, max 1.5 nF) to VDD."
      },
      {
        "number": "2",
        "name": "SBA",
        "type": "input",
        "description": "Analog input for internal bias adjustment in sleep mode, where RSB sets the sleep power consumption and response time."
      },
      {
        "number": "3",
        "name": "TS5",
        "type": "input",
        "description": "Touch sensor 5 analog input."
      },
      {
        "number": "4",
        "name": "TS6",
        "type": "input",
        "description": "Touch sensor 6 analog input."
      },
      {
        "number": "5",
        "name": "TS7",
        "type": "input",
        "description": "Touch sensor 7 analog input."
      },
      {
        "number": "6",
        "name": "TS8",
        "type": "input",
        "description": "Touch sensor 8 analog input."
      },
      {
        "number": "7",
        "name": "TS9",
        "type": "input",
        "description": "Touch sensor 9 analog input."
      },
      {
        "number": "8",
        "name": "SCT",
        "type": "input",
        "description": "Digital input for touch detection suspension control: touch is paused when high, and the chip works normally when low or floating."
      },
      {
        "number": "9",
        "name": "TS10",
        "type": "input",
        "description": "Touch sensor 10 analog input."
      },
      {
        "number": "10",
        "name": "VDD",
        "type": "power_in",
        "description": "Listed as VDD (with type 'digital input' in the table); the supply range is 1.8 V to 5.0 V."
      },
      {
        "number": "11",
        "name": "TS11",
        "type": "input",
        "description": "Touch sensor 11 analog input."
      },
      {
        "number": "12",
        "name": "TS12",
        "type": "input",
        "description": "Touch sensor 12 analog input."
      },
      {
        "number": "13",
        "name": "TS13",
        "type": "input",
        "description": "Touch sensor 13 analog input."
      },
      {
        "number": "14",
        "name": "N.C.",
        "type": "unconnected",
        "description": "No connection; left floating."
      },
      {
        "number": "15",
        "name": "I2C_BA",
        "type": "input",
        "description": "Analog input for internal I2C clock adjustment through resistor RIB; a smaller RIB gives a higher I2C internal clock frequency and more I2C supply current."
      },
      {
        "number": "16",
        "name": "RST",
        "type": "input",
        "description": "Digital system reset input, active high."
      },
      {
        "number": "17",
        "name": "OUT1",
        "type": "output",
        "description": "Channel 1 digital output, open drain."
      },
      {
        "number": "18",
        "name": "SCL",
        "type": "input",
        "description": "I2C clock digital input."
      },
      {
        "number": "19",
        "name": "SDA",
        "type": "bidirectional",
        "description": "I2C data line, digital input/output."
      },
      {
        "number": "20",
        "name": "IRQ",
        "type": "output",
        "description": "Interrupt digital output, open drain."
      },
      {
        "number": "21",
        "name": "I2C_EN",
        "type": "input",
        "description": "I2C enable digital input, active low."
      },
      {
        "number": "22",
        "name": "TS14",
        "type": "input",
        "description": "Touch sensor 14 analog input."
      },
      {
        "number": "23",
        "name": "TS1_SEN0",
        "type": "input",
        "description": "TS1 sensitivity control bit 0 (digital input); TS1_SEN[2:0]=011 gives register-controlled sensitivity."
      },
      {
        "number": "24",
        "name": "TS1_SEN1",
        "type": "input",
        "description": "TS1 sensitivity control bit 1 (digital input)."
      },
      {
        "number": "25",
        "name": "TS1_SEN2",
        "type": "input",
        "description": "TS1 sensitivity control bit 2 (digital input)."
      },
      {
        "number": "26",
        "name": "VSS",
        "type": "power_in",
        "description": "Ground (VSS); the table lists it as 'digital input' with no further description."
      },
      {
        "number": "27",
        "name": "MODE",
        "type": "bidirectional",
        "description": "Output mode control, digital input/output: high selects single channel output, low selects multi-channel output."
      },
      {
        "number": "28",
        "name": "VDD",
        "type": "power_in",
        "description": "Power supply, 1.8 V to 5.0 V."
      },
      {
        "number": "29",
        "name": "TS1",
        "type": "input",
        "description": "Touch sensor 1 analog input."
      },
      {
        "number": "30",
        "name": "TS2",
        "type": "input",
        "description": "Touch sensor 2 analog input."
      },
      {
        "number": "31",
        "name": "TS3",
        "type": "input",
        "description": "Touch sensor 3 analog input."
      },
      {
        "number": "32",
        "name": "TS4",
        "type": "input",
        "description": "Touch sensor 4 analog input."
      },
      {
        "number": "33",
        "name": "EP",
        "type": "passive",
        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-sonnet-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The pin table lists two VDD pins (10 and 28). Pin 10 is typed 'digital input' with no description an; VSS (pin 26) is typed 'digital input' in the table. It was assigned power_in as ground.; MODE is typed 'digital input/output' in the table, but its description reads like a mode-select inpu"
        ],
        "pages_sent": 31,
        "cost_usd": 0.1423,
        "at": "2026-10-23T12:20:04"
      },
      "datasheet": {
        "url": "https://datasheet.lcsc.com/datasheet/pdf/7857c0f4f85fcb2e7faeb185fc0a696f.pdf",
        "pages": 31,
        "sha256": "151f9755341ea842",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 33,
        "described": 33,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "si14t.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          5.0,
          5.0,
          0.875
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "5fa713ea46b36980895812ed853577889b7cb06d275041a39b99bc0be305dc79",
        "checked": "2026-10-23",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "si14t-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          5.0,
          5.0,
          0.875
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "b010113a357fef60fc859f2da5297ca7c4ded03acbac768aebe69306c54c9017",
        "checked": "2026-10-23",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}