main
History Download
Ray Publish 0.1.0 74b97ce

SI1061-A-GM

SILICON LABS · RF Transceiver ICs · QFN-36-EP(5x6)

SI1061-A-GM from SILICON LABS, in a QFN-36-EP(5x6). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 P2.7/C2D bidirectional Port 2.7 is GPIO only and cannot be routed by the Crossbar or used as an analog input, and it carries the bidirectional C2 Debug Interface data signal.
2 XTAL4 passive SmaRTClock oscillator crystal output for the 32.768 kHz RTC crystal (see Section 20 of the datasheet for details).
3 XTAL3 passive SmaRTClock oscillator crystal input for the 32.768 kHz RTC crystal (see Section 20 of the datasheet for details).
4 P1.6 bidirectional Port 1.6 general-purpose port I/O pin that can be assigned to analog, digital, or port-match functions.
5 P1.5 bidirectional Port 1.5 general-purpose port I/O pin that can be assigned to analog, digital, or port-match functions.
6 P1.4 bidirectional Port 1.4 general-purpose port I/O pin that can be assigned to analog, digital, or port-match functions.
7 XOUT passive Crystal oscillator output for an external 25 to 32 MHz crystal, or left floating when driving XIN with an external source.
8 XIN passive Crystal oscillator input for an external 25 to 32 MHz crystal, or connection point for an external clock source.
9 GND_RF power_in Required ground for the digital and analog portions of the EZRadioPRO peripheral.
10 GPIO2 bidirectional General-purpose I/O controlled by the EZRadioPRO peripheral, configurable for functions such as clock output, FIFO status, POR, wake-up timer, TRSW, and antenna diversity control.
11 GPIO3 bidirectional General-purpose I/O controlled by the EZRadioPRO peripheral, configurable for functions such as clock output, FIFO status, POR, wake-up timer, TRSW, and antenna diversity control.
12 RXP input Differential RF input to the EZRadioPRO LNA; see the application schematic for the example matching network.
13 RXN input Differential RF input to the EZRadioPRO LNA; see the application schematic for the example matching network.
14 GND_RF power_in Required ground for the digital and analog portions of the EZRadioPRO peripheral.
15 GND_RF power_in Required ground for the digital and analog portions of the EZRadioPRO peripheral.
16 TX output EZRadioPRO transmit RF output; the PA output is open-drain, so the L-C match must supply 1.8 to 3.6 VDC to this pin.
17 GND_RF power_in Required ground for the digital and analog portions of the EZRadioPRO peripheral.
18 VDD_RF power_in Power supply for the analog portion of the EZRadioPRO peripheral, which must be 1.8 to 3.6 V.
19 TXRAMP output Programmable bias output with ramp capability for an external FET PA.
20 VDD_RF power_in Power supply for the analog portion of the EZRadioPRO peripheral, which must be 1.8 to 3.6 V.
21 GPIO0 bidirectional General-purpose I/O controlled by the EZRadioPRO peripheral, configurable for functions such as clock output, FIFO status, POR, wake-up timer, TRSW, and antenna diversity control.
22 GPIO1 bidirectional General-purpose I/O controlled by the EZRadioPRO peripheral, configurable for functions such as clock output, FIFO status, POR, wake-up timer, TRSW, and antenna diversity control.
23 IRQ output EZRadioPRO interrupt status output that goes low to indicate a pending interrupt; it is open-drain with a 220 k internal pull-up and an external pull-up is recommended.
24 P0.6/CNVSTR bidirectional Port 0.6 general-purpose I/O that also serves as the external convert start input for ADC0.
25 P0.5/RX bidirectional Port 0.5 general-purpose I/O that serves as the UART RX pin when assigned by the Crossbar.
26 P0.4/TX bidirectional Port 0.4 general-purpose I/O that serves as the UART TX pin when assigned by the Crossbar.
27 P0.3/XTAL2 bidirectional Port 0.3 general-purpose I/O that doubles as the external oscillator crystal driver output, external CMOS clock input, or RC/C oscillator clock input depending on oscillator configuration.
28 P0.2/XTAL1 bidirectional Port 0.2 general-purpose I/O that doubles as the external oscillator return for a crystal or resonator, or as an external clock input.
29 P0.1/AGND bidirectional Port 0.1 general-purpose I/O that can serve as the optional analog ground reference for the VREF circuit.
30 P0.0/VREF bidirectional Port 0.0 general-purpose I/O that serves as the external VREF input or internal VREF output, with external decoupling capacitors recommended.
31 GND_MCU power_in Required ground for the entire MCU except the EZRadioPRO peripheral.
32 NC unconnected No connect.
33 VDD_MCU power_in Power supply for the MCU except the EZRadioPRO peripheral, which must be 1.8 to 3.6 V and must always be greater than VBAT; it is not required in low-power sleep mode.
34 NC unconnected No connect.
35 NC unconnected No connect.
36 RST/C2CK bidirectional Device reset: open-drain output of the internal POR or VDD monitor that an external source can pull low for at least 15 µs, with a 1 to 5 kΩ pull-up to VDD_MCU recommended; also the C2 Debug Interface clock.
37 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer SILICON LABS
Package QFN-36-EP(5x6)
Category RF & Radio
Pins 37

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Storage Temperature -65 150 °C 42
Voltage on any Px.x I/O Pin or RST with Respect to GND -0.3 5.8 V VDD > 2.2 V 42
Voltage on VDD_MCU or VDD_MCU/DC+ with respect to GND -0.3 4 V 42
Maximum Total Current through VBAT, DCEN, VDD_MCU/DC+ or GND 500 mA 42
Maximum Output Current Sunk by RST or any Px.x Pin 100 mA 42
Maximum Total Current through all Px.x Pins 200 mA 42
ESD (Human Body Model) 2 kV All pins except TX, RXp, and RXn 42
ESD (Human Body Model) 1 kV TX, RXp, and RXn 42
ESD (Machine Model) 150 V All pins except TX, RXp, and RXn 42
ESD (Machine Model) 45 V TX, RXp, and RXn 42
VDD to GND VDD -0.3 3.6 V 77
Instantaneous VRF-peak to GND on TX Output Pin VRF-peak -0.3 8 V 77
Sustained VRF-peak to GND on TX Output Pin VRF-peak -0.3 6.5 V 77
RX Input Power 10 dBm 77
Maximum Junction Temperature TJ 125 °C 77
Thermal Impedance JA 30 C/W 77
Operating Ambient Temperature Range TA -40 85 °C 77
Supply Voltage (VDD_MCU/DC+) VDD_MCU/DC+ 1.8 1.9 3.6 V One-Cell Mode 43
Supply Voltage (VDD_MCU/DC+) VDD_MCU/DC+ 1.8 2.4 3.6 V Two-Cell Mode 43
SYSCLK (System Clock) SYSCLK 0 25 MHz 43
TSYSH (SYSCLK High Time) TSYSH 18 ns 43
TSYSL (SYSCLK Low Time) TSYSL 18 ns 43
Supply Voltage Range (radio) VDD 1.8 3.3 3.6 V 67
VREG0 Input Voltage Range 1.8 3.6 V 66
XTAL Range XTALRange 25 32 MHz 75
Digital Supply Current, CPU Active (Normal Mode) IDD 4.1 5 mA VDD = 1.8-3.6 V, F = 24.5 MHz (includes precision oscillator current) 43
Digital Supply Current, CPU Inactive (Idle Mode) IDD 2.5 3 mA VDD = 1.8-3.6 V, F = 24.5 MHz (includes precision oscillator current) 44
Oscillator Frequency (Internal Precision Oscillator) 24 24.5 25 MHz VDD = 1.8 to 3.6 V; TA = -40 to +85 °C; factory-calibrated settings 59
Oscillator Frequency (Internal Low-Power Oscillator) 18 20 22 MHz VDD = 1.8 to 3.6 V; TA = -40 to +85 °C; factory-calibrated settings 59
VDD Ramp Time for Power On 3 ms One-cell Mode: VBAT Ramp 0-0.9 V; Two-cell Mode: VBAT Ramp 0-1.8 V 57
VDD_MCU Monitor Threshold (VRST) VRST 1.8 1.85 1.9 V Early Warning 57
VDD_MCU Monitor Threshold (VRST) VRST 1.7 1.75 1.8 V Reset Trigger (all power modes except Sleep) 57
VDD Monitor Threshold (VPOR), Brownout Condition VPOR 0.75 0.8 0.95 V Brownout Condition (VDD Falling) 57
Missing Clock Detector Timeout 100 650 1000 µs Time from last system clock rising edge to reset initiation 57
Minimum System Clock w/ Missing Clock Detector Enabled 7 10 kHz System clock frequency which triggers a missing clock detector timeout 57
Minimum RST Low Time to Generate a System Reset 15 µs 57
RST Output Low Voltage 0.6 V IOL = 1.4 mA 57
RST Input Low Voltage 0.6 V VDD = 2.0 to 3.6 V 57
Flash Size 32768 bytes Si1061, Si1063, Si1065 58
Scratchpad Size 1024 1024 bytes Si1060-Si1065 58
Erase Cycle Time 28 32 36 ms 58
Integral Nonlinearity -1 0.5 1 LSB 60
Full Scale Error -2.5 1 2.5 LSB 60
Signal-to-Noise Plus Distortion 54 58 dB 10 kHz sine-wave single-ended input, 1 dB below Full Scale, 300 ksps 60
SAR Conversion Clock 7.33 MHz 60
Track/Hold Acquisition Time 1.5 us 60
Throughput Rate 300 ksps 60
Conversion Time in SAR Clocks 13 clocks 10-bit Mode 60
Internal High-Speed Reference Output Voltage VREF 1.6 1.65 1.7 V REFSL[1:0] = 11; -40 to +85 °C, VDD = 1.8-3.6 V 62
Internal Precision Reference Output Voltage VREF 1.645 1.68 1.715 V REFSL[1:0] = 00, REFOE = 1; -40 to +85 °C, VDD = 1.8-3.6 V 62
Comparator Input Offset Voltage -7 7 mV 63
Input Current IIN -10 10 µA 0<VIN< VDD 75
Synthesizer Frequency Range FSYN 850 1050 MHz Si1060/61/62/63, Si1080/81/82/83 68
Synthesizer Frequency Range FSYN 420 525 MHz Si1060/61/62/63, Si1080/81/82/83 68
Synthesizer Frequency Range FSYN 284 350 MHz Si1060/61/62/63, Si1080/81/82/83 68
Synthesizer Frequency Range FSYN 142 175 MHz Si1060/61/62/63, Si1080/81/82/83 68
Output Power Range PTX -20 20 dBm Si1060/61, Si1080/81 74
(G)FSK Data Rate DRFSK 0.1 500 kbps Si1060/61/62/63, Si1080/81/82/83 73
RX Channel Bandwidth BW 1.1 850 kHz Si1060/61/62/63, Si1080/81/82/83 70
RSSI Resolution RESRSSI -0.5 0.5 dB 70

CAD (KiCad official)

  • Symbol: SI1061-A-GM
  • Footprint: Package_DFN_QFN:QFN-36-1EP_5x6mm_P0.5mm_EP3.6x4.6mm
  • 3D model: QFN-36-EP(5x6) (KiCad packages3D, STEP)
  • 3D model files: si1061-a-gm-etched.step / si1061-a-gm-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); si1061-a-gm.step / si1061-a-gm.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: SILICON LABS datasheet (358 pp, sha256 176bb082a846e11e, retrieved 2026-10-30, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF