Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

SHT40-AD1F-R2

Sensirion · Global Sourcing Parts · DFN-4(1.5x1.5)

SHT40-AD1F-R2 from Sensirion, in a DFN-4(1.5x1.5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 SDA bidirectional Serial data line of the I2C interface, bidirectional.
2 SCL input Serial clock line of the I2C interface, specified by the datasheet as a unidirectional input.
3 VDD power_in Supply voltage; the datasheet gives the operating range VDD = 1.08 V to 3.6 V (page 1).
4 VSS power_in Ground; the die pad is not directly connected to any pin.

Key specifications

Parameter Value
Manufacturer Sensirion
Package DFN-4(1.5x1.5)
Category Global Sourcing Parts
Pins 4

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage VDD 1.08 3.3 3.6 V 9
Power-up/down voltage, static power supply VPOR 0.6 1.08 V Static power supply 9
Slew rate of the supply voltage VDD, slew 20 V/ms 9
Supply current (heater off), idle state IDD 0.08 1 µA Idle state, at 25 °C 9
Supply current (heater off), idle state IDD 3.4 µA Idle state, at 125 °C 9
Measurement supply current IDD 320 500 µA Current while sensor is measuring 9
Supply current (heater on), nominal heater 200 mW IDD 60 100 mA Nominal heater “200 mW” 9
Supply current (heater on), nominal heater 110 mW IDD 33 55 mA Nominal heater “110 mW” 9
Supply current (heater on), nominal heater 20 mW IDD 6 10 mA Nominal heater “20 mW” 9
Low level input voltage (max printed as 0.3*VDD) VIL 0 0.3 *VDD 9
High level input voltage (min printed as 0.7*VDD; max printed as VDD) VIH 0.7 *VDD 9
Pull up resistor Rp Rp 820 Ω VDD < 1.62 V 9
Pull up resistor Rp Rp 390 Ω VDD ≥ 1.62 V 9
Low level output voltage (max printed as 0.2*VDD) VOL 0.2 *VDD VDD < 1.62 V, Rpullup > 820 Ω 9
Low level output voltage VOL 0.4 V VDD > 2.0 V, Rpullup > 390 Ω 9
Capacitive bus load Cb 400 pF RP ≤ 820 Ω: fast mode 9
Capacitive bus load Cb 340 pF Rp = 390 Ω, VDD > 1.62 V: fast mode plus 9
Power-up time tPU 0.3 1 ms After hard reset, VDD ≥ VPOR 10
Soft reset time tSR 1 ms After soft reset 10
Measurement duration, low repeatability tMEAS,l 1.3 1.6 ms Low repeatability 10
Measurement duration, medium repeatability tMEAS,m 3.7 4.5 ms Med. repeatability 10
Measurement duration, high repeatability tMEAS,h 6.9 8.3 ms High repeatability 10
Heater-on duration, long pulse tHeater 0.9 1 1.1 s Long pulse 10
Heater-on duration, short pulse tHeater 0.09 0.1 0.11 s Short pulse 10
Max voltage on any pin -0.3 0.3 V Min referenced to VSS; max referenced to VDD 10
Operating temperature range -40 125 °C 10
Storage temperature range -40 150 °C 10
ESD HBM 2 kV 10
ESD CDM 500 V 10
Latch up 100 mA JESD78 Class II, 125 °C 10
Recommended normal temperature range 5 60 °C Recommended normal range 7
Recommended normal relative humidity range 20 80 %RH Recommended normal range 7
Heater maximum duty cycle 10 % Heater maximum duty cycle 13
Heater ambient temperature limit 65 °C Heater operated only in ambient temperatures below 65 °C 14
Supply current (heater off), power up IDD 50 µA Power up 9
Average current consumption, high repeatability 2.2 µA Avg., high repeatability; continuous operation with 1 meas. per second 9
Average current consumption, medium repeatability 1.2 µA Avg., med. repeatability; continuous operation with 1 meas. per second 9
Average current consumption, low repeatability 0.4 µA Avg., low repeatability; continuous operation with 1 meas. per second 9
Power consumption at VDD=1.2 V (no heater), high repeatability 2.6 µW Avg., high repeatability; continuous operation with 1 meas. per second 9
Power consumption at VDD=1.2 V (no heater), medium repeatability 1.4 µW Avg., med. repeatability; continuous operation with 1 meas. per second 9
Power consumption at VDD=1.2 V (no heater), low repeatability 0.5 µW Avg., low repeatability; continuous operation with 1 meas. per second 9
Junction-to-ambient thermal resistance RθJA 297 K/W Heater off, die pad not soldered 16
Junction-to-ambient thermal resistance RθJA 357 K/W Heater on, die pad not soldered 16
Junction-to-case thermal resistance RθJC 191 K/W Heater off, die pad not soldered 16
Junction-to-case thermal resistance RθJC 257 K/W Heater on, die pad not soldered 16
Junction-to-board thermal resistance RθJB 193 K/W Heater off, die pad not soldered 16
Junction-to-board thermal resistance RθJB 258 K/W Heater on, die pad not soldered 16
Junction-to-board characterization parameter ΨJB 191 K/W Heater off, die pad not soldered 16
Junction-to-board characterization parameter ΨJB 254 K/W Heater on, die pad not soldered 16
Junction-to-top characterization parameter ΨJT 44 K/W Heater off, die pad not soldered 16
Junction-to-top characterization parameter ΨJT 112 K/W Heater on, die pad not soldered 16

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts copper SHT4x is provided in an open-cavity dual flat no lead (DFN) package. The humidity sensor opening is centered on the top side of the package. The sensor chip is made of silicon, hosted on a copper lead 14

CAD (KiCad official)

  • Symbol: SHT40-AD1F-R2
  • Footprint: Sensor_Humidity:Sensirion_DFN-4_1.5x1.5mm_P0.8mm_SHT4x_NoCentralPad
  • 3D model: DFN-4(1.5x1.5), generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 0.55 mm nominal QFN height). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions are nominal, not the manufacturer's CAD (STEP)
  • 3D model files: sht40-ad1f-r2-etched.step / sht40-ad1f-r2-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); sht40-ad1f-r2.step / sht40-ad1f-r2.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Sensirion datasheet (23 pp, sha256 ed3d2b1894721bb0, retrieved 2026-11-07, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF