main
Ray
Publish 0.1.0
bae981e
SGM8743YN5G
SGMICRO · Comparators · SOT-23-5
SGM8743YN5G from SGMICRO, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT | output | Comparator output, push-pull, swinging within 195mV of the rails with 4mA output current and requiring no external pull-up or pull-down. |
| 2 | -VS | power_in | Negative supply rail; the device operates from 2.7V to 5.5V single supply (+VS to -VS), with absolute maximum supply of 6V. |
| 3 | +IN | input | Non-inverting comparator input; the common-mode input range is -0.1V to (+VS) + 0.1V, and external resistors here can add hysteresis. |
| 4 | -IN | input | Inverting comparator input; with +IN fixed, varying -IN inverts the output, and voltages must stay within the -0.1V to (+VS) + 0.1V common-mode range. |
| 5 | +VS | power_in | Positive supply rail, to be decoupled with a 0.1µF to 4.7µF ceramic capacitor placed as close to the pin as possible; supply range is 2.7V to 5.5V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | SGMICRO |
| Package | SOT-23-5 |
| Category | Amplifiers |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating Supply Voltage | VS | 2.7 | 5.5 | V | 3 | ||
| Input Common Mode Voltage Range | VCM | -0.1 | V | 3 | |||
| Input Offset Voltage | VOS | 0.8 | 4.9 | mV | VS = 5V, VCM = 0V | 3 | |
| Input Offset Voltage | VOS | 5.6 | mV | -40℃ ≤ TA ≤ +85℃ | 3 | ||
| Output Short-Circuit Current (source) | ISOURCE | 23.5 | 35 | mA | VS = 5V, Out to VS/2 | 3 | |
| Output Short-Circuit Current (source) | ISOURCE | 19.5 | mA | -40℃ ≤ TA ≤ +85℃ | 3 | ||
| Output Short-Circuit Current (sink) | ISINK | -25 | -31 | mA | VS = 5V, Out to VS/2 | 3 | |
| Output Short-Circuit Current (sink) | ISINK | -20 | mA | -40℃ ≤ TA ≤ +85℃ | 3 | ||
| Common Mode Rejection Ratio | CMRR | 60 | 77 | dB | VS = 5V, VCM = 0V to 5V | 3 | |
| Common Mode Rejection Ratio | CMRR | 57 | dB | -40℃ ≤ TA ≤ +85℃ | 3 | ||
| Power Supply Rejection Ratio | PSRR | 56 | 74 | dB | VCM = 0V, VS = 2.7V to 5.5V | 3 | |
| Power Supply Rejection Ratio | PSRR | 51 | dB | -40℃ ≤ TA ≤ +85℃ | 3 | ||
| Output Voltage Swing from Rail (high) | VOH | 195 | 275 | mV | VS = 5V, IOUT = 4mA | 3 | |
| Output Voltage Swing from Rail (high) | VOH | 308 | mV | -40℃ ≤ TA ≤ +85℃ | 3 | ||
| Output Voltage Swing from Rail (low) | VOL | 188 | 245 | mV | VS = 5V, IOUT = -4mA | 3 | |
| Output Voltage Swing from Rail (low) | VOL | 277 | mV | -40℃ ≤ TA ≤ +85℃ | 3 | ||
| Supply Current (VS = 3V) | IS | 1.3 | 1.7 | mA | VS = 3V, IOUT = 0mA | 3 | |
| Supply Current (VS = 3V) | IS | 2 | mA | -40℃ ≤ TA ≤ +85℃ | 3 | ||
| Supply Current (VS = 5V) | IS | 1.4 | 1.9 | mA | VS = 5V, IOUT = 0mA | 3 | |
| Supply Current (VS = 5V) | IS | 2.1 | mA | -40℃ ≤ TA ≤ +85℃ | 3 | ||
| Supply Voltage (+VS to -VS) | 6 | V | +VS to -VS | 2 | |||
| Junction Temperature | 150 | ℃ | 2 | ||||
| Storage Temperature Range | -65 | 150 | ℃ | 2 | |||
| Lead Temperature (Soldering) | 260 | ℃ | Soldering, 10s | 2 | |||
| Operating Temperature Range | -40 | 85 | ℃ | 2 |
CAD (KiCad official)
- Symbol:
SGM8743YN5G - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.15 mm tall, datasheet A, midpoint of min and max). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
sgm8743yn5g-etched.step/sgm8743yn5g-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);sgm8743yn5g.step/sgm8743yn5g.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: SGMICRO datasheet (13 pp, sha256
1c9b212bd65ab9f5, retrieved 2026-11-12, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# SGM8743YN5G
**SGMICRO** · Comparators · SOT-23-5
SGM8743YN5G from SGMICRO, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT | output | Comparator output, push-pull, swinging within 195mV of the rails with 4mA output current and requiring no external pull-up or pull-down. |
| 2 | -VS | power_in | Negative supply rail; the device operates from 2.7V to 5.5V single supply (+VS to -VS), with absolute maximum supply of 6V. |
| 3 | +IN | input | Non-inverting comparator input; the common-mode input range is -0.1V to (+VS) + 0.1V, and external resistors here can add hysteresis. |
| 4 | -IN | input | Inverting comparator input; with +IN fixed, varying -IN inverts the output, and voltages must stay within the -0.1V to (+VS) + 0.1V common-mode range. |
| 5 | +VS | power_in | Positive supply rail, to be decoupled with a 0.1µF to 4.7µF ceramic capacitor placed as close to the pin as possible; supply range is 2.7V to 5.5V. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | SGMICRO |
| Package | SOT-23-5 |
| Category | Amplifiers |
| Pins | 5 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating Supply Voltage | VS | 2.7 | | 5.5 | V | | 3 |
| Input Common Mode Voltage Range | VCM | -0.1 | | | V | | 3 |
| Input Offset Voltage | VOS | | 0.8 | 4.9 | mV | VS = 5V, VCM = 0V | 3 |
| Input Offset Voltage | VOS | | | 5.6 | mV | -40℃ ≤ TA ≤ +85℃ | 3 |
| Output Short-Circuit Current (source) | ISOURCE | 23.5 | 35 | | mA | VS = 5V, Out to VS/2 | 3 |
| Output Short-Circuit Current (source) | ISOURCE | 19.5 | | | mA | -40℃ ≤ TA ≤ +85℃ | 3 |
| Output Short-Circuit Current (sink) | ISINK | -25 | -31 | | mA | VS = 5V, Out to VS/2 | 3 |
| Output Short-Circuit Current (sink) | ISINK | -20 | | | mA | -40℃ ≤ TA ≤ +85℃ | 3 |
| Common Mode Rejection Ratio | CMRR | 60 | 77 | | dB | VS = 5V, VCM = 0V to 5V | 3 |
| Common Mode Rejection Ratio | CMRR | 57 | | | dB | -40℃ ≤ TA ≤ +85℃ | 3 |
| Power Supply Rejection Ratio | PSRR | 56 | 74 | | dB | VCM = 0V, VS = 2.7V to 5.5V | 3 |
| Power Supply Rejection Ratio | PSRR | 51 | | | dB | -40℃ ≤ TA ≤ +85℃ | 3 |
| Output Voltage Swing from Rail (high) | VOH | | 195 | 275 | mV | VS = 5V, IOUT = 4mA | 3 |
| Output Voltage Swing from Rail (high) | VOH | | | 308 | mV | -40℃ ≤ TA ≤ +85℃ | 3 |
| Output Voltage Swing from Rail (low) | VOL | | 188 | 245 | mV | VS = 5V, IOUT = -4mA | 3 |
| Output Voltage Swing from Rail (low) | VOL | | | 277 | mV | -40℃ ≤ TA ≤ +85℃ | 3 |
| Supply Current (VS = 3V) | IS | | 1.3 | 1.7 | mA | VS = 3V, IOUT = 0mA | 3 |
| Supply Current (VS = 3V) | IS | | | 2 | mA | -40℃ ≤ TA ≤ +85℃ | 3 |
| Supply Current (VS = 5V) | IS | | 1.4 | 1.9 | mA | VS = 5V, IOUT = 0mA | 3 |
| Supply Current (VS = 5V) | IS | | | 2.1 | mA | -40℃ ≤ TA ≤ +85℃ | 3 |
| Supply Voltage (+VS to -VS) | | | | 6 | V | +VS to -VS | 2 |
| Junction Temperature | | | | 150 | ℃ | | 2 |
| Storage Temperature Range | | -65 | | 150 | ℃ | | 2 |
| Lead Temperature (Soldering) | | | | 260 | ℃ | Soldering, 10s | 2 |
| Operating Temperature Range | | -40 | | 85 | ℃ | | 2 |
## CAD (KiCad official)
- Symbol: `SGM8743YN5G`
- Footprint: `Package_TO_SOT_SMD:SOT-23-5`
- 3D model: SOT-23-5, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.15 mm tall, datasheet A, midpoint of min and max). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files: `sgm8743yn5g-etched.step` / `sgm8743yn5g-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `sgm8743yn5g.step` / `sgm8743yn5g.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [SGMICRO datasheet](docs/sgm8743yn5g-datasheet.pdf) (13 pp, sha256 `1c9b212bd65ab9f5`, retrieved 2026-11-12, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/sgm8743yn5g-datasheet.pdf)