main
Ray Publish 0.1.3 6f17d6f
{
  "slug": "sgm811-txka4",
  "version": "0.1.3",
  "type": "component",
  "description": "SGMICRO Supervisor and Reset ICs, SOT-143. Datasheet-verified pinout, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "pmic",
    "sgm811-txka4"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "sgm811-txka4.kicad_sym",
    "sgm811-txka4.kicad_mod",
    "sgm811-txka4.glb",
    "sgm811-txka4.step",
    "sgm811-txka4.lbr",
    "docs/hero.png",
    "docs/sgm811-txka4-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "sgm811-txka4-etched.step",
    "sgm811-txka4-etched.glb",
    "sgm811-txka4-hero.glb",
    "sgm811-txka4-hero.overlay.json"
  ],
  "component": {
    "mpn": "SGM811-TXKA4",
    "manufacturer": "SGMICRO",
    "package": "SOT-143",
    "pin_count": 4,
    "category": "Supervisor and Reset ICs",
    "parts": {
      "symbol": "sgm811-txka4.kicad_sym",
      "footprint": "sgm811-txka4.kicad_mod",
      "model_3d": "sgm811-txka4-hero.glb",
      "model_3d_plain": "sgm811-txka4.glb",
      "model_3d_step": "sgm811-txka4-etched.step",
      "model_3d_step_plain": "sgm811-txka4.step",
      "lbr": "sgm811-txka4.lbr"
    },
    "pins": [
      {
        "number": "1",
        "name": "GND",
        "type": "power_in",
        "description": "Ground reference for the supervisor. Connect to the system 0V rail."
      },
      {
        "number": "2",
        "name": "RESET",
        "type": "output",
        "description": "Active-low reset logic output (RESET/nRESET). Remains low while VCC is below the reset threshold (3.08V typ for -T variant) or when MR is low; then remains low for at least 150ms (240ms typ) after VCC rises above the reset threshold. Output stays valid down to VCC = 1V."
      },
      {
        "number": "3",
        "name": "MR",
        "type": "input",
        "description": "Manual Reset input (active low, debounced). Ignores input pulses of 100ns or less (typ) and is guaranteed to accept pulses greater than 10us. Internally pulled up to VCC via ~1 MOhm; leave floating when not used."
      },
      {
        "number": "4",
        "name": "VCC",
        "type": "power_in",
        "description": "Power supply voltage that is monitored. Operating range 1.0V-5.5V (0C-70C) or 1.2V-5.5V (-40C-125C). Typical supply current 13uA at VCC < 3.6V for the T variant. Absolute max 6V."
      }
    ],
    "provenance": {
      "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction",
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "cad_basis": {
        "from": [
          "README CAD section (factory cad_wording)",
          ".kicad_mod model path agrees"
        ],
        "missing": []
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "distributor_links": {
      "digikey": false,
      "mouser": false
    },
    "distributor_check": {
      "checked_at": "2026-10-05T19:16:37Z",
      "source": "Component Ocean /api/assign-pns + lcsc_map",
      "digikey": {
        "pn": null,
        "status": "no match"
      },
      "mouser": {
        "pn": null,
        "status": "no match"
      }
    },
    "models_3d": [
      {
        "file": "sgm811-txka4.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          2.3,
          2.9,
          1.1
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "b35b433c0dc71ac416a9c731e744d2e0610f82ebe97275830f0e17cdcbe44512",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "sgm811-txka4-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          2.3,
          2.9,
          1.1
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "836c593b46b026bcec1b81da54e410f790402b3175089b373b2c72a913f0e287",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  },
  "visibility": "public"
}