Generated by kicad-footprint-generator · KiCad file format 20260206
SGM6607AYTN6G
SGMICRO · Pre-ordered Products · TSOT-23-6
SGM6607AYTN6G from SGMICRO, in a TSOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Input supply pin for the IC; connect VIN to a supply voltage between 3V and 20V. |
| 2 | EN | input | Enable pin of the boost regulator; logic low (below 0.4V) disables the chip and logic high (1.6V minimum) enables it, with an internal 500kΩ pull-down resistor. |
| 3 | SW | output | Switching node of the IC; connect SW to the switched side of the inductor, with an absolute maximum rating of -0.3V to 40V. |
| 4 | GND | power_in | Ground. |
| 5 | COMP | output | Output of the transconductance error amplifier; connect an external RC network to this pin to compensate the regulator, with the datasheet's example of 4.99kΩ and 10nF and a suggested CCOMP range of 1nF to 22nF. |
| 6 | FB | input | Feedback pin; connect to the center tap of a resistor divider to program the output voltage, with an absolute maximum rating of -0.3V to 3V on FB and COMP. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | SGMICRO |
| Package | TSOT-23-6 |
| Category | Solders / Accessories / Batteries |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Voltage Range | VIN | 3 | 20 | V | 4 | ||
| Operating Quiescent Current into VIN | IQ | 400 | 600 | μA | Device PWM switching no load | 4 | |
| Shutdown Current | ISHDN | 1 | μA | TJ = +25℃, VEN = GND, VIN = 4.2V | 4 | ||
| Under-Voltage Lockout Threshold | UVLO | 2.2 | 2.5 | V | VIN falling | 4 | |
| Under-Voltage Lockout Hysteresis | VHYS | 70 | mV | 4 | |||
| EN Logic High Voltage | VIH | 1.6 | V | VIN = 3V to 20V | 4 | ||
| EN Logic Low Voltage | VIL | 0.4 | V | VIN = 3V to 20V | 4 | ||
| EN Pull-Down Resistor | REN | 300 | 500 | 700 | kΩ | TJ = +25℃ | 4 |
| Voltage Feedback Regulation Voltage | VREF | 1.203 | 1.229 | 1.255 | V | 4 | |
| Voltage Feedback Input Bias Current | IFB | 300 | nA | VFB = 1.3V | 4 | ||
| Oscillator Frequency | fS | 0.86 | 1.1 | 1.38 | MHz | 4 | |
| Maximum Duty Cycle | D | 90 | 95 | % | VFB = 1.1V | 4 | |
| Minimum ON Pulse Width | tMIN_ON | 80 | ns | 4 | |||
| COMP Pin Sink Current | ISINK | 55 | μA | 4 | |||
| COMP Pin Source Current | ISOURCE | 55 | μA | 4 | |||
| Error Amplifier Transconductance | GEA | 200 | 300 | 440 | μS | 4 | |
| N-Channel MOSFET On-Resistance | RDS(ON) | 0.36 | 0.55 | Ω | TJ = +25℃, VIN = 3.6V | 4 | |
| N-Channel MOSFET On-Resistance | RDS(ON) | 0.6 | Ω | TJ = +25℃, VIN = 3.0V | 4 | ||
| N-Channel Leakage Current | ILN_NFET | 1 | μA | TJ = +25℃, VSW = 35V, VEN = 0V | 4 | ||
| N-Channel MOSFET Current Limit | ILIM | 0.9 | 1.2 | 1.56 | A | TJ = +25℃ | 4 |
| VREF Ramp Up Time | tr | 2 | ms | 4 | |||
| Thermal Shutdown Threshold | TSHDN | 150 | ℃ | 4 | |||
| Thermal Shutdown Threshold Hysteresis | THYS | 15 | ℃ | 4 | |||
| Input Voltage Range | VIN | 3 | 20 | V | 2 | ||
| Output Voltage Range | VOUT | 38 | V | Lower limit printed as 1.1 × VIN | 2 | ||
| Operating Ambient Temperature Range | TA | -40 | 85 | ℃ | 2 | ||
| Operating Junction Temperature Range | TJ | -40 | 125 | ℃ | 2 | ||
| Supply Voltage on VIN | VIN | -0.3 | 22 | V | 2 | ||
| Voltage on EN | VEN | -0.3 | 6 | V | 2 | ||
| Voltages on FB and COMP | VFB, VCOMP | -0.3 | 3 | V | 2 | ||
| Voltage on SW | VSW | -0.3 | 40 | V | 2 | ||
| Junction Temperature | TJ | 150 | ℃ | 2 | |||
| Storage Temperature Range | TSTG | -65 | 150 | ℃ | 2 | ||
| Lead Temperature (Soldering) | 260 | ℃ | 10s | 2 | |||
| Package Thermal Resistance, junction to ambient | θJA | 190 | ℃/W | TSOT-23-6 | 2 |
CAD (KiCad official)
- Symbol:
SGM6607AYTN6G - Footprint:
Package_TO_SOT_SMD:TSOT-23-6 - 3D model: TSOT-23-6 (KiCad packages3D, STEP)
- 3D model files:
sgm6607aytn6g-etched.step/sgm6607aytn6g-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);sgm6607aytn6g.step/sgm6607aytn6g.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: SGMICRO datasheet (16 pp, sha256
c632033e53b147b4, retrieved 2026-11-04, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).