component
SGM6603-ADJYN6G
Public Made by Adomby adom
SGMICRO DC-DC Converters, SOT-23-6. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
SGM6603-ADJYN6G
SGMICRO · DC-DC Converters · SOT-23-6
SGM6603-ADJYN6G from SGMICRO, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SW | output | Boost and rectifying switch node; the datasheet names it the boost and rectifying switch input and gives a 1A switch current limit (0.8 to 1.3A). |
| 2 | GND | power_in | Ground reference for the device. |
| 3 | EN | input | Enable input: logic 1 (VCC) enables the converter and logic 0 (GND) disables it; the EN input low and high thresholds depend on VCC (for example, VIH is 2.6V minimum at 4.2V < VCC ≤ 5.0V). |
| 4 | FB | input | Output voltage feedback pin used with an external resistor divider to program VOUT for the ADJ version; the feedback voltage is 485 to 515mV with a 500mV typical value. |
| 5 | VOUT | power_out | Boost converter output, with output voltage range 2.5V to 5.5V and output voltage clamping at 6V. |
| 6 | VCC | power_in | Boost converter supply voltage, with input voltage range after start-up of 0.9V to 5.5V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | SGMICRO |
| Package | SOT-23-6 |
| Category | Power Management (PMIC) |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output Voltage Range | VOUT | 2.5 | 5.5 | V | 4 | ||
| Input Voltage Range after Start-Up | VIN | 0.9 | 5.5 | V | 4 | ||
| Minimum Input Voltage for Start-Up | VIN | 0.9 | 1.1 | V | RL = 3.3kΩ | 4 | |
| Minimum Input Voltage for Start-Up | VIN | 1.1 | 1.3 | V | RL = 270Ω | 4 | |
| Feedback Voltage | VFB | 485 | 500 | 515 | mV | 4 | |
| Oscillator Frequency | f | 900 | 1200 | 1400 | kHz | 4 | |
| Switch Current Limit | ISW | 0.8 | 1 | 1.3 | A | 4 | |
| Start-up Current Limit | 300 | mA | 4 | ||||
| Boost Switch-On Resistance | 480 | mΩ | VOUT = 3.3V | 4 | |||
| Rectifying Switch-On Resistance | 600 | mΩ | VOUT = 3.3V | 4 | |||
| Output Voltage Accuracy | 3 | % | VCC = 1.2V, IO = 10mA | 4 | |||
| Line Regulation | 0.5 | 1 | % | VCC = 0.9V to VOUT - 0.5V, IO = 10mA | 4 | ||
| Load Regulation | 0.5 | % | 4 | ||||
| VCC current (row labelled VCC) | VCC | 0.1 | 1 | µA | 4 | ||
| Quiescent Current | VOUT | 30 | 50 | µA | VOUT = 3.3V; VEN = VCC = 1.2V, IO = 0mA | 4 | |
| Quiescent Current | VOUT | 33 | 55 | µA | VOUT = 5V; VEN = VCC = 1.2V, IO = 0mA | 4 | |
| Shutdown Current | 1 | µA | VEN = 0V, VCC = 1.2V | 4 | |||
| EN Input Low Voltage | VIL | 0.6 | V | 1.8V < VCC ≤ 3.3V | 4 | ||
| EN Input High Voltage | VIH | 1.5 | V | 0.9V ≤ VCC ≤ 1.8V | 4 | ||
| EN Input High Voltage | VIH | 2 | V | 1.8V < VCC ≤ 3.3V | 4 | ||
| EN Input High Voltage | VIH | 2.4 | V | 3.3V < VCC ≤ 4.2V | 4 | ||
| EN Input High Voltage | VIH | 2.6 | V | 4.2V < VCC ≤ 5.0V | 4 | ||
| EN Input Current | 1 | µA | Clamped on GND or VCC | 4 | |||
| Overtemperature Protection | 150 | ℃ | 4 | ||||
| Overtemperature Hysteresis | 20 | ℃ | 4 | ||||
| Input Supply Voltage on SW, VOUT, VCC, FB, EN | -0.3 | 6 | V | Applies to pins SW, VOUT, VCC, FB, EN | 2 | ||
| Operating Temperature Range | -40 | 85 | ℃ | 2 | |||
| Junction Temperature | 150 | ℃ | 2 | ||||
| Storage Temperature | -65 | 150 | ℃ | 2 | |||
| Package Thermal Resistance, junction-to-ambient | θJA | 150 | ℃/W | SOT-23-6 | 2 | ||
| Inductance range for optimized operation | L | 2.2 | 10 | µH | Device optimized for this range; 4.7µH typical | 10 |
CAD (KiCad official)
- Symbol:
SGM6603-ADJYN6G - Footprint:
Package_TO_SOT_SMD:SOT-23-6 - 3D model: SOT-23-6 (KiCad packages3D, STEP)
- 3D model files:
sgm6603-adjyn6g-etched.step/sgm6603-adjyn6g-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);sgm6603-adjyn6g.step/sgm6603-adjyn6g.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: SGMICRO datasheet (12 pp, sha256
88f1b22821c2e54e, retrieved 2026-10-17, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# SGM6603-ADJYN6G
**SGMICRO** · DC-DC Converters · SOT-23-6
SGM6603-ADJYN6G from SGMICRO, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SW | output | Boost and rectifying switch node; the datasheet names it the boost and rectifying switch input and gives a 1A switch current limit (0.8 to 1.3A). |
| 2 | GND | power_in | Ground reference for the device. |
| 3 | EN | input | Enable input: logic 1 (VCC) enables the converter and logic 0 (GND) disables it; the EN input low and high thresholds depend on VCC (for example, VIH is 2.6V minimum at 4.2V < VCC ≤ 5.0V). |
| 4 | FB | input | Output voltage feedback pin used with an external resistor divider to program VOUT for the ADJ version; the feedback voltage is 485 to 515mV with a 500mV typical value. |
| 5 | VOUT | power_out | Boost converter output, with output voltage range 2.5V to 5.5V and output voltage clamping at 6V. |
| 6 | VCC | power_in | Boost converter supply voltage, with input voltage range after start-up of 0.9V to 5.5V. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | SGMICRO |
| Package | SOT-23-6 |
| Category | Power Management (PMIC) |
| Pins | 6 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output Voltage Range | VOUT | 2.5 | | 5.5 | V | | 4 |
| Input Voltage Range after Start-Up | VIN | 0.9 | | 5.5 | V | | 4 |
| Minimum Input Voltage for Start-Up | VIN | 0.9 | | 1.1 | V | RL = 3.3kΩ | 4 |
| Minimum Input Voltage for Start-Up | VIN | 1.1 | | 1.3 | V | RL = 270Ω | 4 |
| Feedback Voltage | VFB | 485 | 500 | 515 | mV | | 4 |
| Oscillator Frequency | f | 900 | 1200 | 1400 | kHz | | 4 |
| Switch Current Limit | ISW | 0.8 | 1 | 1.3 | A | | 4 |
| Start-up Current Limit | | | | 300 | mA | | 4 |
| Boost Switch-On Resistance | | | | 480 | mΩ | VOUT = 3.3V | 4 |
| Rectifying Switch-On Resistance | | | | 600 | mΩ | VOUT = 3.3V | 4 |
| Output Voltage Accuracy | | | | 3 | % | VCC = 1.2V, IO = 10mA | 4 |
| Line Regulation | | | 0.5 | 1 | % | VCC = 0.9V to VOUT - 0.5V, IO = 10mA | 4 |
| Load Regulation | | | | 0.5 | % | | 4 |
| VCC current (row labelled VCC) | VCC | | 0.1 | 1 | µA | | 4 |
| Quiescent Current | VOUT | | 30 | 50 | µA | VOUT = 3.3V; VEN = VCC = 1.2V, IO = 0mA | 4 |
| Quiescent Current | VOUT | | 33 | 55 | µA | VOUT = 5V; VEN = VCC = 1.2V, IO = 0mA | 4 |
| Shutdown Current | | | | 1 | µA | VEN = 0V, VCC = 1.2V | 4 |
| EN Input Low Voltage | VIL | | | 0.6 | V | 1.8V < VCC ≤ 3.3V | 4 |
| EN Input High Voltage | VIH | 1.5 | | | V | 0.9V ≤ VCC ≤ 1.8V | 4 |
| EN Input High Voltage | VIH | 2 | | | V | 1.8V < VCC ≤ 3.3V | 4 |
| EN Input High Voltage | VIH | 2.4 | | | V | 3.3V < VCC ≤ 4.2V | 4 |
| EN Input High Voltage | VIH | 2.6 | | | V | 4.2V < VCC ≤ 5.0V | 4 |
| EN Input Current | | | | 1 | µA | Clamped on GND or VCC | 4 |
| Overtemperature Protection | | | | 150 | ℃ | | 4 |
| Overtemperature Hysteresis | | | | 20 | ℃ | | 4 |
| Input Supply Voltage on SW, VOUT, VCC, FB, EN | | -0.3 | | 6 | V | Applies to pins SW, VOUT, VCC, FB, EN | 2 |
| Operating Temperature Range | | -40 | | 85 | ℃ | | 2 |
| Junction Temperature | | | | 150 | ℃ | | 2 |
| Storage Temperature | | -65 | | 150 | ℃ | | 2 |
| Package Thermal Resistance, junction-to-ambient | θJA | | | 150 | ℃/W | SOT-23-6 | 2 |
| Inductance range for optimized operation | L | 2.2 | | 10 | µH | Device optimized for this range; 4.7µH typical | 10 |
## CAD (KiCad official)
- Symbol: `SGM6603-ADJYN6G`
- Footprint: `Package_TO_SOT_SMD:SOT-23-6`
- 3D model: SOT-23-6 (KiCad packages3D, STEP)
- 3D model files: `sgm6603-adjyn6g-etched.step` / `sgm6603-adjyn6g-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `sgm6603-adjyn6g.step` / `sgm6603-adjyn6g.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [SGMICRO datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588881234957111296) (12 pp, sha256 `88f1b22821c2e54e`, retrieved 2026-10-17, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/sgm6603-adjyn6g-datasheet.pdf)