SGM6232YPS8G

{
 "schema": "adom.pads/1",
 "slug": "sgm6232yps8g",
 "footprint": "SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm",
 "generated_from": {
  "footprint": "SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm@sha256:a7971720bdda0353",
  "pins": "page.json:component.pins",
  "overrides": null
 },
 "pin1": {
  "pad": "1",
  "at": [
   -2.475,
   -1.905
  ],
  "corner": "top-left",
  "source": "silk-marker",
  "derived_from": "SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm@sha256:a7971720bdda0353"
 },
 "pad_count": 9,
 "symbol_pins": [
  "1",
  "2",
  "3",
  "4",
  "5",
  "6",
  "7",
  "8",
  "9"
 ],
 "paste_apertures": 4,
 "issues": [],
 "pads": [
  {
   "pad": "1",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -2.475,
    -1.905
   ],
   "rot": 0.0,
   "size": [
    1.95,
    0.6
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "1",
   "name": "BS",
   "type": "passive",
   "description": "High-side gate drive boost input. Supplies the driver for the internal high-side N-channel MOSFET. Connect a 10nF or greater capacitor from SW to BS to power the high-side switch. A 10Ω resistor between SW and the BS cap is strongly recommended to reduce SW spike voltage.",
   "is_pin1": true,
   "source": {
    "geometry": "SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "2",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -2.475,
    -0.635
   ],
   "rot": 0.0,
   "size": [
    1.95,
    0.6
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "2",
   "name": "IN",
   "type": "power_in",
   "description": "Power input. Supplies the IC and the step-down converter high-side switch. Drive with a 4.5V to 38V source. Bypass to GND with a sufficiently large ceramic capacitor (22µF typical) to eliminate noise on the input.",
   "is_pin1": false,
   "source": {
    "geometry": "SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "3",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -2.475,
    0.635
   ],
   "rot": 0.0,
   "size": [
    1.95,
    0.6
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "3",
   "name": "SW",
   "type": "power_out",
   "description": "Power switching output. Switching node that supplies power to the output through the external LC filter. A capacitor is required from SW to BS to power the high-side switch.",
   "is_pin1": false,
   "source": {
    "geometry": "SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "4",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -2.475,
    1.905
   ],
   "rot": 0.0,
   "size": [
    1.95,
    0.6
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "4",
   "name": "GND",
   "type": "power_in",
   "description": "Ground. Connect the exposed pad on the backside to pin 4.",
   "is_pin1": false,
   "source": {
    "geometry": "SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "5",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    2.475,
    1.905
   ],
   "rot": 0.0,
   "size": [
    1.95,
    0.6
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "5",
   "name": "FB",
   "type": "input",
   "description": "Feedback input. Regulated to 0.8V (typ). Connect to the tap of the resistor divider between output and ground to set the output voltage using VOUT = 0.8 × (R1+R2)/R2.",
   "is_pin1": false,
   "source": {
    "geometry": "SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "6",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    2.475,
    0.635
   ],
   "rot": 0.0,
   "size": [
    1.95,
    0.6
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "6",
   "name": "COMP",
   "type": "output",
   "description": "Compensation node for the regulation control loop. Connect a series RC network from COMP to GND to compensate the transconductance error amplifier; an additional capacitor from COMP to GND may be required.",
   "is_pin1": false,
   "source": {
    "geometry": "SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "7",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    2.475,
    -0.635
   ],
   "rot": 0.0,
   "size": [
    1.95,
    0.6
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "7",
   "name": "EN",
   "type": "input",
   "description": "Enable input. Digital input that turns the regulator on/off (VIH ≥ 1.2V, VIL ≤ 0.4V). Drive high to enable, low to disable; output is discharged when the IC is off. Leave unconnected for automatic startup (internal 0.8-2µA pull-up).",
   "is_pin1": false,
   "source": {
    "geometry": "SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "8",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    2.475,
    -1.905
   ],
   "rot": 0.0,
   "size": [
    1.95,
    0.6
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "8",
   "name": "SS",
   "type": "input",
   "description": "Soft-start control input. Connect a capacitor from SS to GND to set the soft-start period (tSS = 100kΩ × CSS; 0.1µF → 10ms). Leave unconnected to disable the external soft-start feature.",
   "is_pin1": false,
   "source": {
    "geometry": "SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "9",
   "kind": "smd",
   "shape": "rect",
   "at": [
    0.0,
    0.0
   ],
   "rot": 0.0,
   "size": [
    2.29,
    3.0
   ],
   "layers": [],
   "thermal": true,
   "pin": "9",
   "name": "GND",
   "type": "power_in",
   "description": "Power ground exposed pad on the backside of the SOIC-8 package. Must be connected to the GND plane for proper electrical grounding and thermal performance (θJA = 50°C/W).",
   "is_pin1": false,
   "source": {
    "geometry": "SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  }
 ]
}