← Commit history
README.mdadded+48@@ -0,0 +1,48 @@+# SGM6130YPS8G++**SGMICRO** · DC-DC Converters · SOIC-8-EP++SGM6130YPS8G from SGMICRO, in a SOIC-8-EP. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | BS | input | High-side gate drive boost input. Supplies the bootstrap voltage for the internal high-side N-channel MOSFET. Connect a 10nF (or greater) capacitor from SW to BS; a 10Ω series resistor between SW and the BS cap is strongly recommended to reduce SW spike voltage. |+| 2 | IN | power_in | Power input. Supplies the IC and the step-down converter switch. Drive with a 4.5V to 28.5V source and bypass to GND with a sufficiently large (e.g. 22µF ceramic) capacitor. |+| 3 | SW | power_out | Power switching output. Switching node that supplies power to the output LC filter. Also serves as the reference for the BS bootstrap capacitor. |+| 4 | GND | power_in | Ground return for the IC. The exposed pad on the backside of the package must be connected to pin 4 and to the GND plane. |+| 5 | FB | input | Feedback input. Regulated to an internal 0.8V reference. Connect to a resistor divider between the output and GND to program the output voltage (VOUT = 0.8V × (1 + R2/R3)). |+| 6 | COMP | output | Loop compensation node. Connect a series RC network from COMP to GND to compensate the regulation control loop; in some cases an additional shunt capacitor from COMP to GND is required. |+| 7 | EN | input | Enable digital input. Drive high to turn the regulator on, drive low to turn it off (output is discharged when off). Leave unconnected for automatic start-up. Absolute maximum -0.3V to 6V. |+| 8 | SS | input | Soft-start control input. Connect a capacitor from SS to GND to program the soft-start period; a 0.1µF capacitor sets ~10ms. Leave unconnected to disable the external soft-start (internal soft-start still active). |+| 9 | EP | power_in | Exposed thermal pad on backside of package. Power ground; must be connected to pin 4 and to the GND plane for proper electrical operation and heat dissipation (θJA ≈ 50°C/W). |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | SGMICRO |+| Package | SOIC-8-EP |+| Category | PMIC |+| Pins | 9 |++## Ordering variants++- `SGM6130YPS8G/TR`++## CAD (KiCad official)++- Symbol: `SGM6130YPS8G`+- Footprint: `Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm`+- 3D model: SOIC-8-EP (KiCad packages3D, STEP)++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [SGMICRO datasheet](docs/sgm6130yps8g-datasheet.pdf) (None pp, sha256 `75f0cbe078531a5a`, retrieved 2026-08-17, tier: lcsc)+- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/sgm6130yps8g-datasheet.pdf)
page.jsonadded+34@@ -0,0 +1,34 @@+{+ "slug": "sgm6130yps8g",+ "version": "0.1.0",+ "type": "component",+ "description": "SGMICRO DC-DC Converters, SOIC-8-EP. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "pmic",+ "sgm6130yps8g"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "sgm6130yps8g.kicad_sym",+ "sgm6130yps8g.kicad_mod",+ "sgm6130yps8g.glb",+ "sgm6130yps8g.step",+ "sgm6130yps8g.lbr",+ "docs/hero.png",+ "docs/sgm6130yps8g-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html"+ ],+ "visibility": "public",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}