← Commit history

sgm6130yps8g: restore the component block (pinout + model declarations) from this page's own README and symbol

Ray ·a3ce8133f5 · ·parent ff28d98
1 file changed +80−1
page.json+80−1
@@ -33,5 +33,84 @@   "author": {     "name": "Ray",     "email": "[email protected]"+  },+  "component": {+    "mpn": "SGM6130YPS8G",+    "manufacturer": "SGMICRO",+    "package": "SOIC-8-EP",+    "pin_count": 9,+    "category": "DC-DC Converters",+    "parts": {+      "symbol": "sgm6130yps8g.kicad_sym",+      "footprint": "sgm6130yps8g.kicad_mod",+      "model_3d": "sgm6130yps8g-etched.glb",+      "model_3d_plain": "sgm6130yps8g.glb",+      "model_3d_step": "sgm6130yps8g-etched.step",+      "model_3d_step_plain": "sgm6130yps8g.step",+      "lbr": "sgm6130yps8g.lbr"+    },+    "pins": [+      {+        "number": "1",+        "name": "BS",+        "type": "input",+        "description": "High-side gate drive boost input. Supplies the bootstrap voltage for the internal high-side N-channel MOSFET. Connect a 10nF (or greater) capacitor from SW to BS; a 10Ω series resistor between SW and the BS cap is strongly recommended to reduce SW spike voltage."+      },+      {+        "number": "2",+        "name": "IN",+        "type": "power_in",+        "description": "Power input. Supplies the IC and the step-down converter switch. Drive with a 4.5V to 28.5V source and bypass to GND with a sufficiently large (e.g. 22µF ceramic) capacitor."+      },+      {+        "number": "3",+        "name": "SW",+        "type": "power_out",+        "description": "Power switching output. Switching node that supplies power to the output LC filter. Also serves as the reference for the BS bootstrap capacitor."+      },+      {+        "number": "4",+        "name": "GND",+        "type": "power_in",+        "description": "Ground return for the IC. The exposed pad on the backside of the package must be connected to pin 4 and to the GND plane."+      },+      {+        "number": "5",+        "name": "FB",+        "type": "input",+        "description": "Feedback input. Regulated to an internal 0.8V reference. Connect to a resistor divider between the output and GND to program the output voltage (VOUT = 0.8V × (1 + R2/R3))."+      },+      {+        "number": "6",+        "name": "COMP",+        "type": "output",+        "description": "Loop compensation node. Connect a series RC network from COMP to GND to compensate the regulation control loop; in some cases an additional shunt capacitor from COMP to GND is required."+      },+      {+        "number": "7",+        "name": "EN",+        "type": "input",+        "description": "Enable digital input. Drive high to turn the regulator on, drive low to turn it off (output is discharged when off). Leave unconnected for automatic start-up. Absolute maximum -0.3V to 6V."+      },+      {+        "number": "8",+        "name": "SS",+        "type": "input",+        "description": "Soft-start control input. Connect a capacitor from SS to GND to program the soft-start period; a 0.1µF capacitor sets ~10ms. Leave unconnected to disable the external soft-start (internal soft-start still active)."+      },+      {+        "number": "9",+        "name": "EP",+        "type": "power_in",+        "description": "Exposed thermal pad on backside of package. Power ground; must be connected to pin 4 and to the GND plane for proper electrical operation and heat dissipation (θJA ≈ 50°C/W)."+      }+    ],+    "provenance": {+      "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }   }-}\ No newline at end of file+}