component
SGM6013-3.3YTN5G
Public Made by Adomby adom
SGMICRO DC-DC Converters, SOT-23-5. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownSGM6013-3.3YTN5G
SGMICRO · DC-DC Converters · SOT-23-5
SGM6013-3.3YTN5G from SGMICRO, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Supply voltage pin for the 2.5V to 5.5V input range (absolute maximum -0.3V to 6V), which must be closely decoupled to GND with a 4.7µF or greater ceramic capacitor. |
| 2 | GND | power_in | Ground reference pin for the regulator. |
| 3 | RUN | input | Run control input that enables the part when forced above 1.5V and shuts it down when forced below 0.3V, and it must not be left floating. |
| 4 | VOUT | input | On the fixed 3.3V version this pin is the output voltage feedback (VOUT) that connects to an internal resistive divider for comparison to the 0.6V reference, while on the adjustable version it is the external feedback input (VFB) with the internal divider disabled. |
| 5 | SW | output | Switch node connection to the inductor, tied to the drains of the internal main and synchronous power MOSFETs. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | SGMICRO |
| Package | SOT-23-5 |
| Category | Power Management (PMIC) |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Voltage Range | VIN | 2.5 | 5.5 | V | Full = -40℃ to +85℃ | 4 | |
| Regulated Output Voltage (SGM6013-3.3) | VOUT | 3.188 | 3.3 | 3.412 | V | IOUT = 100mA | 4 |
| Output Voltage Line Regulation | ∆VOUT | 0.1 | 0.6 | %/V | VIN = 2.5V to 5.5V, Full | 4 | |
| Oscillator Frequency | fOSC | 1.3 | 1.6 | 1.9 | MHz | VFB = 0.6V or VOUT = 100%, Full | 4 |
| Peak Inductor Current | IPK | 1 | 1.25 | A | VFB = 0.5V or VOUT = 90%, VIN = 3V, +25℃ | 4 | |
| SW Leakage Current | ISW | -1 | 0.01 | 1 | μA | VRUN = 0V, VSW = 0V or 5V, VIN = 5V, +25℃ | 4 |
| Supply Current, PWM Mode | IS | 280 | 360 | μA | VFB = 0.5V or VOUT = 90%, ILOAD = 0A, +25℃ | 4 | |
| Supply Current, PFM Mode | IS | 30 | 56 | μA | VFB = 0.62V or VOUT = 103%, ILOAD = 0A | 4 | |
| Shutdown Supply Current | 0.1 | 1 | μA | VRUN = 0V, VIN = 4.2V | 4 | ||
| RUN Threshold High | VIH | 1.5 | V | Full | 4 | ||
| RUN Threshold Low | VIL | 0.3 | V | 4 | |||
| RUN Leakage Current | IRUN | -1 | 0.01 | 1 | μA | Full | 4 |
| RDS(ON) of P-Channel FET | RPFET | 0.46 | 0.65 | Ω | ISW = 100mA, +25℃ | 4 | |
| RDS(ON) of N-Channel FET | RNFET | 0.36 | 0.56 | Ω | ISW = -100mA, +25℃ | 4 | |
| Output Voltage Load Regulation | VLOADREG | 0.5 | % | +25℃ | 4 | ||
| Oscillator Frequency (VFB = 0V or VOUT = 0V) | fOSC | 200 | kHz | VFB = 0V or VOUT = 0V, +25℃ | 4 | ||
| PFM/PWM Mode Switch Point | 40 | mA | +25℃ | 4 | |||
| Input Supply Voltage | -0.3 | 6 | V | 2 | |||
| RUN, VFB Voltages | -0.3 | V | Maximum printed as VIN (not a number) | 2 | |||
| SW Voltage | -0.3 | V | Maximum printed as (VIN + 0.3V) (not a number) | 2 | |||
| P-Channel Switch Source Current (DC) | 800 | mA | DC | 2 | |||
| N-Channel Switch Sink Current (DC) | 800 | mA | DC | 2 | |||
| Operating Temperature Range | -40 | 85 | ℃ | 2 | |||
| Junction Temperature | 150 | ℃ | 2 | ||||
| Storage Temperature Range | -65 | 150 | ℃ | 2 | |||
| Lead Temperature (Soldering) | 260 | ℃ | Soldering, 10s | 2 | |||
| ESD Susceptibility HBM | 4000 | V | HBM | 2 | |||
| ESD Susceptibility MM | 300 | V | MM | 2 |
CAD (KiCad official)
- Symbol:
SGM6013-3.3YTN5G - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5 (KiCad packages3D, STEP)
- 3D model files:
sgm6013-3-3ytn5g-etched.step/sgm6013-3-3ytn5g-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);sgm6013-3-3ytn5g.step/sgm6013-3-3ytn5g.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: SGMICRO datasheet (22 pp, sha256
d0bba1decbb3293e, retrieved 2026-10-19, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).